• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.39.1-39.1
• /
• 2015

Korea has a long history in astronomy, which is proved by many observational records written in Korean chronicles. There are 43 sunspot records in Goryeo dynasty (高麗 918-1392) and 13 records in Joseon dynasty (朝鮮 1392-1910). According to analysis of Korean historical records, it is known that sunspot records in Goryeo dynasty show well in match with the well-known solar activity of 11.3 years. It means that Korean historical sunspot records show real solar phenomena. Korean sunspot records also show that solar activity decrease in Joseon dynasty compared with the previous ~500 years. In order to know the change of solar activity in detail, we examine Korean historical atmospheric records which can indicate climate change. We first analyze historical frost records. Korean chronicles have around 600 frost records during the last millennium. We find that the climate change shows sign of cooling down when check the variation of epoch that the first and last frost events in each year are written. This result is well in accord with that of historical sunspot records. Therefore, we claim that solar activity decrease during the last thousand years.

• Journal of the Korean Society of Tobacco Science
• /
• v.23 no.1
• /
• pp.60-64
• /
• 2001

The variability of a ventilated filter cigarette depends on the details of its construction and one properties of its components and the variations in filter ventilation is effected by many factors such as tobacco column pressure drop, filter pressure drop, tipping paper and plug wrap permeability, and vent position. In this study, the effects of combination of tipping paper and plug wrap on filter ventilation of cigarettes were studied for the target ventilation level under the specific tobacco column and filter tip in order to reduce the variation of filter ventilation. When Nicolas Baskevitch\`s equation on filter ventilation was used to try out Monte Carlo Simulation, at the combination where tipping paper permeability is high and plug wrap permeability is low, even the small change in tipping paper and plug wrap permeability showed high variation of target ventilation level. Also, according to the analysis data of filter ventilation in cigarettes designed at the level of 45% filter ventilation by the combinations with tipping paper and plug wrap, the variation in cigarette filter ventilation was increased as increasing tipping paper permeability and decreasing plug wrap permeability. As the results of this study, the variation of filter ventilation can be reduced by increasing plug wrap permeability/tipping paper permeability ratio in the cigarette design, considering 2-3% of tipping paper permeability variation(%CV) and about 10% of plugwrap permeability variation.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.103-115
• /
• 2018

The uncertainty of climate scenarios, as initial information, is one of the significant factors among uncertainties of climate change impacts and vulnerability assessments. In this sense, the quantification of the uncertainty of climate scenarios is essential to understanding these assessments of impacts and vulnerability for adaptation to climate change. Here we quantified the precision of surface temperature of ensemble scenarios (high resolution (1km) RCP4.5 and 8.5) provided by Korea Meteorological Administration, with spatiotemporal variation of the standard deviation of them. From 2021 to 2050, the annual increase rate of RCP8.5 was higher than that of RCP4.5 while the annual variation of RCP8.5 was lower than that of RCP4.5. The standard deviations of ensemble scenarios are higher in summer and winter, particularly in July and January, when the extreme weather events could occur. In general, the uncertainty of ensemble scenarios in summer were lower than those in winter. In spatial distribution, the standard deviation of ensemble scenarios in Seoul Metropolitan Area is relatively higher than other provinces, while that of Yeongnam area is lower than other provinces. In winter, the standard deviations of ensemble scenarios of RCP4.5 and 8.5 in January are higher than those of December. Especially, the standard deviation of ensemble scenarios is higher in the central regions including Gyeonggi, and Gangwon, where the mean surface temperature is lower than southern regions along with Chungbuk. Such differences in precisions of climate ensemble scenarios imply that those uncertainty information should be taken into account for the implementation of national climate change policy.

• Korean Journal of Remote Sensing
• /
• v.36 no.1
• /
• pp.1-13
• /
• 2020

Seasonal changes in river water vary seasonally as well as locationally, and the assessment is essential. In this study, we used the recent technique of post-classification by using the Google earth engine (GEE) to map the seasonal changes in Mahanadi river of Odisha. However,some fixed problems results during the rainy season that affects the livelihood system of Cuttack such as flooding, drowning of children and waste material deposit. Therefore, this study conducted 1) to map and analyse the water density changes and 2) to analyse the seasonal variation of river water to resolve and prevent problem shortcomings. Our results showed that nine types of variation can be found in the Mahanadi River each year. The increase and decrease of intensity of surface water analysed, and it varies in between -130 to 70 ㎥/nf. The highest frequency change is 2900 Hz near Cuttack city. The pi diagram provides the percentage of seasonal variation that can be observed as permanent water (30%), new seasonal (28%), ephemeral (12%), permanent to seasonal (7%) and seasonal (10%). The analysis is helpful and effective to assess the seasonal variation that can provide a platform for the development of Cuttack city that lies in Mahanadi delta.

• Ocean and Polar Research
• /
• v.32 no.3
• /
• pp.177-186
• /
• 2010

A sequential extraction technique was used to study sediment phosphorus speciation and its relative importance in the intertidal flat of Keunso Bay during summer and winter for a better understanding of the phosphorus cycle and bioavailability in intertidal sediments. Loosely sorbed P contents were the lowest among the five P-pools and showed little seasonal or spatial variation. Although Fe-bound P contents were almost constant in winter, they decreased rapidly with sediment depth in summer. The dissolution of Fe oxides, used as an oxidant for the anaerobic respiration, ascribed the rapid decrease of Fe-bound P in summer. Al-bound P contents displayed little seasonal variation, but showed a large spatial variation, with higher values in the upper intertidal flat. Comprising about 50% of total P, Ca-bound P contents were the highest among the five P-pools. Ca-bound P contents were higher in winter than summer, but did not exhibit a clear spatial variation. Organic P contents were higher in summer than winter, which was associated with higher primary production and clam biomass in summer. Organic P contents were higher in the lower intertidal flat than the upper intertidal flat. In Keunso Bay, bioavailable P contents of the intertidal flat comprising about one third of total P ranged from 2.41 to 5.09 ${\mu}molg^{-1}$ in summer and 3.82 to 5.29 ${\mu}molg^{-1}$ in winter. The bioavailability of P contents was higher in the lower intertidal flat than the upper intertidal flat, which was attributed to the large clam production in the lower intertidal flat.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.3
• /
• pp.1-9
• /
• 1999

This paper described the results of the characteristics of the near-bottom flow and field analysis of the tidal flats sediment. It was the aim of this paper to grasp current flow of tidal flat's environment and influence factor for environmental change forecast of tidal flats. Field measurement of water velocity, water elevation, bed materials test, and temperature distribution of tidal flat were conducted. Thereafter, current flow, turbidity and temperature distribution of tidal flat sediment have been discussed. The field research results showed that the fluctuating velocity near the seabed before and after its appearance at low tide was strongly affected by the wind wave. The resuspension of the sea-bottom sediment took place with great intensity before and after the appearance of the seabed at low tide. Both the sea water level and the weather condition were a significant influential factors. Such as, temperature and turbidity just on the surface and the shallow layer of seabed sediments were varied largely with time and weather conditions, but that its deeper layers was almost constant. Temperature on the seabed sediments was strongly influenced by irradiance and water depth. The temperature variation of the tidal flat and the variation characteristics of the current flow and turbidity depend greatly on the inhabiting environment of the tidal flat benthic organism.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.14-20
• /
• 2013

All most of floors can become less slip resistant with wear. The deterioration of slip resistance can often occur rapidly. So relatively new products can become hazardous within a short period of time. The main objective of this study was the comparison of slip resistance variations caused by traffic wear and accelerative wear. The second objective was to ascertain the effect of wear, and to find out the causes of slip resistance change. Although statistical differences were observed between results of traffic wear and accelerative wear, the trend of the variations of slip resistance caused by traffic wear and accelerative wear was very similar. The measured slip resistance of tested floor changed up to 29%(and 26.5%) after 100,000 steps(and 750 cycles). As the traffic wear and accelerative wear were progressed, the surface roughness of the tested floor became smoother, and so the floor became more slippery under the wet condition. The abraded(worn out) floor surface tended to become hydrophilic surface, while the new floor surface tended to show hydrophobic nature. This phenomenon would change the wettability of floor surface, and the wettability would affect the variation of slip resistance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.36-39
• /
• 2000

A small electrical potential difference which appears on any solid body when subjected to illumination by a modulated light beam generated by laser is called photocharge voltage(PCV)[1,2]. This voltage is proportional to the induced change in the surface electrical charge and is capacitatively measured on various materials such as conductors, semiconductors, ceramics, dielectrics and biological objects. The amplitude of the detected signal depends on the type of material under investigation, and on the surface properties of the sample. In photocharge voltage spectroscopy measurements[3], the sample is illuminated by both a steady state monochromatic bias light and the pulsed laser. The monochromatic light is used to created a variation in the steady state population of trap levels in the surface and space charge region of semiconductor samples which does result in a change in the measured voltage. Using this technique the spatial variation of PCV can be utilized to evalulate the surface conditions of the sample and the variation of the PCV due to the monochromatic bias light are utilized to charactrize the surface states. A qualitative analysis of the proposed measuremen is present along with experimental results performed on amorphous silicon samples. The deposition temperature was varied in order to obtain samples with different structural, optical and electronic properties and measurements are related to the defect density in amorphous thin film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.36-39
• /
• 2000

A small electrical potential difference which appears on any solid body when subjected to illumination by a modulated light beam generated by laser is called photocharge voltage(PCV)[1,2]. This voltage is proportional to the induced change in the surface electrical charge and is capacitatively measured on various materials such as conductors, semiconductors, ceramics, dielectrics and biological objects. The amplitude of the detected signal depends on the type of material under investigation, and on the surface properties of the sample. In photocharge voltage spectroscopy measurements[3], the sample is illuminated by both a steady state monochromatic bias light and the pulsed laser. The monochromatic light is used to created a variation in the steady state population of trap levels in the surface and space charge region of semiconductor samples which does result in a change in the measured voltage. Using this technique the spatial variation of PCV can be utilized to evaluate the surface conditions of the sample and the variation of the PCV due to the monochromatic bias light are utilized to characterize the surface states. A qualitative analysis of the proposed measurement is present along with experimental results performed on amorphous silicon samples. The deposition temperature was varied in order to obtain samples with different structural, optical and electronic properties and measurements are related to the defect density in amorphous thin film.