• Journal of Pharmaceutical Investigation
• /
• v.34 no.3
• /
• pp.209-214
• /
• 2004

A bioequivalence study of $Roxithrin^{TM}$ tablet (Kukje Pharma. Ind. Co., Ltd.) to $Rulid^{TM}$ tablet (Han Dok Pharma. Ind. Co., Ltd.) was conducted according to the guidelines of Korea Food and Drug Administration (KFDA). Twenty four healthy male Korean volunteers received each medicine at the roxithromycin dose of 300 mg in a $2{\times}2$ crossover study. There was a one-week wash-out period between the doses. Plasma concentrations of roxithromycin were monitored by a high-performance liquid chromatography for over a period of 36 hours after drug administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 36 hr) was calculated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t$ and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the cross-over design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for $Roxithrin^{TM}/Rulid^{TM}$ were 1.00 - 1.13 and 0.98 - 1.10, respectively. These values were within the acceptable bioequivalence intervals of 0.80 - 1.25. Thus, our study demonstrated the bioequivalence of $Roxithrin^{TM}$ and $Rulid^{TM}$ with respect to the rate and extent of absorption.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.6
• /
• pp.421-427
• /
• 2008

The purpose of the present study was to evaluate the bioequivalence of two etodolac capsules, Kuhnillodin capsule (Kuhnil. Co., Ltd., Seoul, Korea) as reference drug and Etodin capsule (Myungmun Pharm. Co., Ltd., Seoul, Korea) as test drug, according to the guidelines of Korea Food and Drug Administration (KFDA). Twenty-three healthy male Korean volunteers received one capsule at the dose of 200 mg etodolac in a $2{\times}2$ crossover study. There was a one-week washout period between the doses. Plasma concentrations of etodolac were monitored by a high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) for over a period of 24 hr after the administration. $AUC_{0-24\;hr}$ was calculated by the linear trapezoidal rule method. $C_{max}$ and $T_{max}$ were compiled from the plasma concentration-time data. Analysis of variance (ANOVA) was carried out using logarithmically transformed $AUC_{0-24\;hr}$ and $C_{max}$. The 90% confidence intervals of the $AUC_{0-24\;hr}$ ratio and the $C_{max}$ ratio for Etodin/Kuhnillodin were $\log\;0.97{\sim}\log\;1.08$ and $\log\;0.89{\sim}\log\;1.19$, respectively. These values were within the acceptable bioequivalence intervals of $\log\;0.80{\sim}\log\;1.25$. Thus, our study demonstrated that Etodin was bioeqiovalent to Kuhnillodin preparation when the rate and extent of absorption between two preparations were compared.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.542-549
• /
• 2007

The purpose of this study was to evaluate the difference in the surface roughness after polishing and to evaluate the difference in color stability after immersion in a dye solution among four types of composite resin materials. Four light-polymerized composite resins(Shade A2) with different sized filler content(a nanofilled, a hybrid, a microfilled, a flowble) were used. Average surface roughness (Ra) was measured with a surface roughness tester (Surftest Formtracer) before and after polishing with aluminum oxide abrasive discs(Super-Snap). Color of specimens before and after staining with 2% methylene blue solution were measured using spectrophotometer(CM-3700d) with SCI geometries. The results of Ra and ${\Delta}E$ were analyzed by one-way analysis of variance(ANOVA), a Scheffe multiple comparison test and Student t-test(p=0.05). After polishing, Ra values were decreased regardless of type of composite resins. In surface roughness after polishing and color stability after staining, nanofilled composite resin was not different with other composite resins except flowable resins.

• Journal of Korean Dental Science
• /
• v.7 no.2
• /
• pp.49-57
• /
• 2014

Purpose: To evaluate the effect of different surface treatment methods (yttria-tetragonal zirconia polycrystal [Y-TZP] primers, air-abrasion, and tribochemical surface treatment) on the shear bond strength between (Y-TZP) ceramics and etch-and-rinse non-10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing resin cements. Materials and Methods: Y-TZP ceramic surfaces were ground flat with 600-grit silicone carbide abrasives paper and then divided into seven groups of ten. They were treated as the following: untreated (control), Monobond Plus (IvoclarVivadent), Z-PRIME Plus (Bisco Inc.), ESPE Sil with CoJet (3M ESPE), air-abrasion, Monobond Plus with air-abrasion, and Z-PRIME Plus with air-abrasion. The surface of Y-TZP specimens was analyzed under a scanning electron microscope (SEM). Non-MDP-containing cements were placed on the surface-treated Y-TZP specimens. After thermocycling, shear bond strength test was performed. Bond strength values were statistically analyzed using one-way analysis of variance and Student-Newman-Keuls multiple comparison test (P<0.05). Result: The Z-PRIME Plus treatment in combination with air-abrasion produced the highest bond strength ($14.94{\pm}1.70MPa$) followed by Monobond Plus combined with air-abrasion ($10.70{\pm}1.71MPa$), air-abrasion ($10.47{\pm}1.60MPa$), ESPE Sil after CoJet treatment ($10.38{\pm}0.87MPa$), Z-PRIME Plus application ($10.00{\pm}1.70MPa$), and then Monobond Plus application ($9.25{\pm}0.86MPa$). The control ($6.70{\pm}1.49MPa$) indicated the lowest results (P<0.05). The SEM results showed different surface morphologies according to surface treatment methods compared with the Y-TZP control. Conclusion: The shear bond strength between the Y-TZP ceramic and the non-MDP-containing resin cement was the greatest when the surface was treated with air-abrasion and MDP-containing Z-PRIME Plus primer.

• Physical Therapy Korea
• /
• v.23 no.3
• /
• pp.21-28
• /
• 2016

Background: The toe-spread-out (TSO) exercise has been introduced as a strengthening exercise for the abductor hallucis muscle in subjects with hallux valgus. Visual biofeedback using ultrasound imaging during exercise, may increase the ability to selectively contract the abductor hallucis muscle, compared with exercise alone. Objects: The aim of this study was to investigate the effects of ultrasound imaging visual feedback during the TSO exercise with respect to its influence on the angle of the first metatarsophalangeal joint (1st MPJ) and the cross-sectional area (CSA) of the abductor hallucis muscle in subjects with hallux valgus. Methods: Twenty-five healthy young subjects with a mean average age of 22.5 years, and a standard deviation of 2.3 years, were recruited for this study. Hallux valgus was defined as an angles greater than $15^{\circ}$ angle of 1st MPJ. Goniometric measurement was used to determine the angle of 1st MPJ. In addition, an ultrasound system was used to collect the CSA of the abductor hallucis muscle in each foot. The angle of the 1st MPJ and CSA of the abductor hallucis were measured in three positions; the resting position, during TSO exercise, and during TSO exercise in conjunction with real-time ultrasound imaging feedback. All data analyzed using a repeated analysis of variance with Bonferroni correction in order to compare the dependent variables in all three positions. Statistical level of significance was set up as p<.05. Results: The angle of the 1st MPJ was noted to be significantly reduced and the CSA of the abductor hallucis to be significantly greater during TSO exercise used in conjunction with ultrasound imaging visual feedback, compared to when the values were recorded during TSO exercise alone (p<.05). Conclusion: Based on these findings, it can be concluded that the application of ultrasound imaging visual feedback during TSO exercise is more effective in contracting selectively the abductor hallucis than the use of exercise alone.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• Journal of the Korean Dietetic Association
• /
• v.11 no.3
• /
• pp.365-374
• /
• 2005

This study was conducted to compare the validity of obese index among body mass index(BMI), waist to hip ratio(WHR), and waist circumference(WC) and to determine which is the best in relation to cardiovascular risk factors of middle aged Korean(40-64yr).Data from the 1998 Korean Health and Nutrition Survey were used(N=3380). Anthropometric indices and cardiovascular risk factors were measured. Chi-square test, analysis of variance following duncan's multiple range test, partial correlation analysis, and Receiver Operator characteristic(ROC) curves were used in the analysis. There was a significant increasing trend in WHR, systolic blood pressure(SBP), high density lipoprotein cholesterol(HDL), and fasting blood sugar(FBS) with age categories of male and in BMI, WC, WHR, diastolic blood pressure(DBP), SBP, total cholesterol(TC), low density lipoprotein cholesterol(LDL), triglycerol(TG), and FBS with those of female. Specially female had the characteristics of upper body fat and systolic blood pressure risk(p<0.05). Proportions of subjects with lifestyle factors related to cardiovascular risk in overweight or upper body fat group were higher than that of normal group. Higher proportions of subjects were practiced exercise in upper body fat group of male than in other groups. Among 7 cardiovascular risk factors in partial correlation analysis, BMI had the highest correlation coefficient in 6 risk factors in male, whereas WC in 4 risk factors in female. Mean of each obese index according to cardiovascular risk groups except smoker was higher than that of normal(p<0.05). These trends were shown in upper body fat group and female. In ROC analysis of 12 risk factors and health conditions, the largest area under curve among obese indices for risk factors were BMI in male and WHR in female. The optimal cutoff values of each index(BMI: WHR: WC) for one or more cardiovascular risk factors were 23.13: 0.89: 85.35 in male and 23.57: 0.84: 78.35 in female. The results showed that cardiovascular risk factors were prevalent in middle aged Koreans within normal limits of obese indices like another Asians. For the identification of cardiovascular risk factors of middle aged Koreans, BMI for men and WHR for women are appropriate indices. But it is recommended that BMI, WHR, and WC, all three indices should be considered, when using these indices.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.521-528
• /
• 2013

This study was performed to examine effects of PNF combined pattern training on balance ability and functional ability of hockey players. In order to achieve this purpose, total 28 participants were separated into two group: 14 comparison group and 14 experiment group, and the experiment group performed PNF combined pattern training for 12 week, 3 times a week, 60 minutes a day. Each group was measured beforehand, after 6 week and 12 week. balance ability was measured using GOOD BALANCE system and functional ability was measured using carioca and shuttle-run test. For statistically verifying above measured values, repeated measure analysis of variance was analyzed and have following results. As the comparing results of balance ability, normal standing eye close(NSEC) was ant-post and velocity moment of experiment group showed significant differences(p<.05). And one leg right eye close(OLREC) was ant-post, med-lat and velocity moment of experiment group showed significant differences (p<.05). Also, dynamic balance ability was ant-post and velocity moment of experiment groups showed significant differences(p<.05). As the comparing results of functional ability, shuttle-run of experiment group sowed significant differences(p<.05). From above results, balance ability of hockey players was shown to be improved through symmetric training of PNF combined pattern applied to hockey players, and it can be considered that this is actively recommended for training method to improve athletic performance of hockey players.

• PNF and Movement
• /
• v.7 no.3
• /
• pp.17-27
• /
• 2009

The purpose of this study was to investigate the effect of close kinetic chain(CKC) and open kinetic chain(OKC) posion on proprioceptive neuromuscular facilitation applied to the unilateral upper extremity on the muscle activation of lower extremity. All subjects were randomly assigned to two groups: open kinetic chain group(n=5),closed kinetic chain group(n=5). All participants were PNF patterns applied on the unilateral upper extremity in all subjects were the kinetic chain(CKC) and open kinetic chain(OKC) posion on flexion/abduction/external rotation. The hold and approximation techniques for the irradiation were applied to end range. All measurements for each subject took the following tests: pre-test, post - test in 4weeks, post-testin 8weeks. EMG data was collected from the vastus medialis, tibialis anterior, biceps femoris, and gastrocnemius muscle of both lower extreamity using surface EMG system, Each EMG value in individual muscle was normalized for maximal voluntary contraction. The data were analyzed using Two-way analysis of variance(ANOVA) with repeated measures to determine the statistical significances. The results of this study are summarized as follows. First, during for close kinetic chain(CKC) and open kinetic chain(OKC) posion on PNF pattern application, all of the %MVIC values of close kinetic chain and open kinetic chain posion increased sign ificantly compared(p<0.05). Second, The close kinetic chain(CKC) and open kinetic chain(OKC) posion on PNF pattern application was significantly increased with in the intervention period(p<.05). Third, there was a no significant open kinetic chain posion on PNF pattern application of sing muscle group with in the intervention period.(p<0.05) there was a significant close kinetic chain posion on PNF pattern application of sing muscle group with with in the intervention period(p<0.05). Forth, interaction of the exercise position and muscle was also significant. Post-hoc tests revealed that the activation levels of vastus medialis muscle and tibialis anterior muscle was higher in the closed kinetic chain position(p<.05). that the activation levels of vastus medialis and gastrocnemius muscle was higher in the open kinetic chain position(p<.05). In conclusion, it was found that the application of PNF patterns to the unilateral upper extremity effect on the muscle activation of lower extremity and both open kinetic chain exercise and closed kinetic chain exercise was significantly increased muscle activity. Further studies are needed to analyzed long term effects and subjects resulting from these changed.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.543-550
• /
• 2005

In the present work, modulus of rupture (MOR), flexural toughness properties $(I_{30}\;and\;W_{2.0})$ and workability (slump) of high performance hybrid fiber reinforced concrete (HPHFRC) mixed with micro-fiber (carbon fiber) and macro-fiber (steel fiber), and replaced with a fine mineral admixture such as silica fume (SF) are characterized through the analysis of variance (ANOVA). Data of MOR, $I_{30}(or W_{2.0})$ and slump are used as the characteristic values to estimate flexural performance and workable property of HPHFRC. Specially, an experimental design was Planned according to the fractional orthogoanl nay method to reduce experimental number of times. The experimental results show that steel fiber is a considerable significant factor in MOR and I30 $(W_{2.0})$. Based on the significance of experimental factors about each characteristic factors, the following evaluation can be used: Experiment factors which reduce slump most remarkably are carbon fiber, steel fiber, silica fume order.; Those that improve MOR most significantly are silica fume $({\fallingdotseq}\;carbon\;fiber)$, steel fiber order; Those that increase flexural toughness most distinctly are silica fume, carbon fiber, steel fiber order. It is obtained that the combination of steel fiber $1.0\%$, carbon fiber $0.25\%$ and silica fume $5.0\%$ is the experimental condition that improve MOR and flexural toughness excellently with workability ensured within the experiment.