• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.969-978
• /
• 2016

Around the world are increasing the demand for ESS. Currently, the domestic is expected to benefit by operating ESS. In the domestic, it is expected to benefit from operations of the installed ESS because of the introduction of ESS less capacity. However ESS capacity to the maximum profit occurs is unknown. ESS is different from the charge-discharge characteristics and the reserve to replace, depending on the application. Therefore, it should be established in accordance with the ESS optimal capacity according to the purpose used because it can maximize the quality and efficiency of the electric energy. To the ESS optimal capacity estimation by the purpose used, It should compare the investment cost caused by ESS facility installation and operation cost caused by operating ESS. In this paper, the operation mathematical model for estimating marginal operation costs established. In operation mathematical model, operating cost is considered fuel cost and no-load cost start-up cost. Because no-load cost and start-up cost are not related to cost and power plant output, there are expressed an integer variable costs as a step function.

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.257-264
• /
• 2010

Though existent a transcranial magnetic stimulation makes various treatment and diagnostic sine waveform of fixed stimulation pulse, there is limitation. In this research, because strength, pulse width, pulse pattern required in treatment and diagnostic introduce other Cockroft-Walton circuit and half bridge inverter frequency and voltage variable become new device propose wish to. Have more advantages than existing device. First, do not have high voltage transformer. Second, switching loss can be less, and control output energy precisely. Three, stimulation strengths, pulse width, pulse pattern are various. As a result, sought special quality and an experiment that is improved applying inverter and cockroft - Walton circuit is half bridge inverter that do not use transformer.

• Journal of the Korean Home Economics Association
• /
• v.48 no.2
• /
• pp.51-62
• /
• 2010

The primary purpose of this study was to employ an ecological model to analyze relative magnitudes of significant predictors affecting school life satisfaction in Korea Science Academy. The instruments used for this study were school life satisfaction Scale, Self-Efficacy Scale, Relationship Skill Scale, Internal Control Scale, Emotional Intelligence Scale, and FACE IV Scale. Data were collected by purposive sampling of 180 students of the Korea Science Academy in Busan, Korea. The data were analyzed by frequency, percentile, mean, standard deviation, Cronbach' ${\alpha}$, Pearson's productive correlation, hierarchical regression and stepwise regression, using SPSS 15.0+WIN program package. The results were as follows: 1. The level of school life satisfaction in Korea Science Academy was found to be high(Mean = 4.24, SD = 0.57). 2. Model IV was the most powerful. It explained 49.7% of the school life satisfaction. 3. Relationship with friends(${\beta}$ = .443), with teachers(${\beta}$ = .273), and self-efficacy(${\beta}$ = .201) were significant factors in explaining the school life satisfaction. The three variables explained 49.9% of school life satisfaction.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.432-440
• /
• 2010

In this paper, a LC series resonant boost converter using a single switch is proposed. The proposed topology contains additional passive elements in the conventional boost converter and performs Zero Voltage Switching(ZVS) without an additional auxiliary switch when a main switch turned on and off. The switch off time of the proposed system determined by LC series resonance, thus a on-time variable Pulse Frequency Modulation(PFM) method is adapted to control output voltage in the proposed converter. Operational modes of the proposed topology are divided with respected to the current conduction paths and then through the theoretical analysis and experimental results, operational modes and characteristics of the proposed converter are verified.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.4
• /
• pp.352-359
• /
• 2010

In recent years, the market has shown increasing interest in pump-turbines. The prompt availability of pumped storage plants and the benefits to the power system achieved by peak lopping, providing reserve capacity, and rapid response in frequency control are providing a growing advantage. In this context, there is a need to develop pumpturbines that can reliably withstand dynamic operation modes, fast changes of discharge rate by adjusting the variable diffuser vanes, as well as fast changes from pumping to turbine operation. In the first part of the present study, various flow patterns linked to operation of a pump-turbine system are discussed. In this context, pump and turbine modes are presented separately and different load cases are shown in each operating mode. In order to create modern, competitive pump-turbine designs, this study further explains what design challenges should be considered in defining the geometry of a pump-turbine impeller. The second part of the paper describes an innovative, staggered approach to impeller development, applied to a low head pump-turbine project. The first level of the process consists of optimization strategies based on evolutionary algorithms together with 3D in-viscid flow analysis. In the next stage, the hydraulic behavior of both pump mode and turbine mode is evaluated by solving the full 3D Navier-Stokes equations in combination with a robust turbulence model. Finally, the progress in hydraulic design is demonstrated by model test results that show a significant improvement in hydraulic performance compared to an existing reference design.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.124-132
• /
• 2018

This paper proposes an LLC resonant converter based battery charger which utilizes an adaptive turn ratio scheme to achieve a wide output voltage range and high efficiency. The high frequency transformer of the LLC converter of the proposed strategy has an adaptively changed turn ratio through the auxiliary control circuit. As a result, an optimized converter design with high magnetizing inductance is possible, while minimizing conduction and turn-off losses and providing a regulated voltage gain to properly charge the lithium ion battery. For a step-by-step explanation, operational principle and optimal design considerations of the proposed converter are illustrated in detail. Finally, the effectiveness of the proposed strategy is verified through various experimental results and efficiency analysis based on prototype 300W Li-ion battery charger and battery pack.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.1
• /
• pp.44-53
• /
• 2020

A bridgeless single-stage AC-DC converter for wireless power charging systems is proposed. This converter is composed of a PFC stage and a three-level hybrid DC-DC stage. The proposed converter can control the wide output voltage (200-450 V_DC) by the variable link voltage and the pulse-width voltage applied to the primary resonant circuit due to the phase-shifted modulation at a fixed switching frequency. Moreover, the input power factor and the total harmonic distortion can be improved by using the proposed converter. A 1 kW prototype was fabricated and validated through experimental results and analysis.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• Korea journal of population studies
• /
• v.9 no.2
• /
• pp.42-52
• /
• 1986

An attempt had been made to obtain current information on induced abortion among currently married women aged 15 to 44. The source of data was 1985 National Fertility and Family Planning Survey conducted by Korea Institute for Population and Health in may 1985. 1. At the time of the survey, 53 percent of currently married women aged 15 to 44 had experienced induced abortion: 25.5 percent of the respondents who had experienced induced abortion only one time and another 27.6 percent more than two times. 2. The proportion of women who had experienced induced abortion seemed to increase according to the advance in age. It seemed that there was no significant difference in the experience rate of induced abortion by academic career, and there was inverse relationship between the experience rate of induced abortion and the age at first marriage. The experience rate if induced abortion by the number of living children was highest among those who had three children as 65.6 percent. 3. To analyze the effect of induced abortion on fertility, this study employed multiple regression analysis as a statistical technique. Instead of index representing fertility level the number of living children served as dependent variable. Independent variables used in analysis included age, age at first marriage, education level, ideal number of children, religion, frequency of induced abortion, total number of pregnancies and participation in labor force. Standardized partial regression coefficient of induced abortion was no less than -0.61. So, it can be concluded that induced abortion offered the great contribution on the birth control. A consistant health education and efficient management of family planning program would be essential for effectiveness of contraceptive practice.