• 한국항공우주학회지
• /
• 제33권4호
• /
• pp.71-78
• /
• 2005

초임계 상태의 질소 유동 환경에서 헵탄 액적의 기화 특성을 수치적으로 연구하였다. 더불어 실기체 효과와 액적 내부 순환, 다양한 열역학적 물성치 및 고압 효과를 고려하였다. 또한 헵탄 액적 바로 근처에서의 저속 유동 문제를 풀기 위하여 예조건화 스킴을 적용한 시간 전진법을 수치 코드에 적용하였다. 주위 유동 속도와 주위 압력을 변화 시켜가면서 액적의 거동을 살펴보았다. 유동 속도 증가로 인한 레이놀즈수의 증가에 따라 액적의 변형이 활발히 이루어졌고, 동일한 레이놀즈수에 대해서는 압력이 높아질수록 액적의 변형이 약화되었다.

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.63-68
• /
• 2017

이 논문에서는 열간 사상압연 공정에서 스트립 통판성의 안정성과 판 품질 향상을 위하여 새로운 선진율 학습모델 개발에 관한 연구를 수행한다. 먼저 기존의 선진율 해석모델에 대한 고찰을 통해 스트립 장력, 루퍼 각도 그리고 롤 주속이 선진율 학습에 크게 영향을 미치는 주요 압연 인자들임을 보인다. 두 번째로는 선진율 학습의 주요 압연 인자들을 이용하여 새로운 선진율 학습모델을 도출한 후, 보조변수 규명 알고리즘을 이용하여 이산시간계 학습모델을 규명한다. 끝으로 컴퓨터 시뮬레이션을 통해 이 논문에서 제안한 새로운 학습모델이 기존의 학습모델보다 유용함을 보인다.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.13-21
• /
• 2001

Electrorheological(ER) fluid is a kind of smart material with variable shear stress and dynamic viscosity under various electric field intensity. Electric field can control the damping characteristics of ER damper. The objective of this study is the analysis of the performance of ER damper and its application to shock absorber. Idealized nonlinear Bingham plastic shear flow model is used to predict the velocity profile between electrodes. Cylindrical dashpot ER damper with moving electrode is constructed and tested under various electric fields. The analytic and experimental results for damping force are compared and discussed. Drop test system using ER damper is prepared to identify transient vibration characteristics. The rebound is eased as the applied electric field increases. When semi-active control algorithm is applied, rebound phenomenon disappears and vibration energy level decays faster than the case of zero electric field.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.765-770
• /
• 2000

Hot-wire measurements are reported on the developing turbulent flows subject to plane rate of strain in a rotating $90^{\circ}$ dog bend. The cross-section of the bend varies from $100mm{\times}50mm$ rectangular shape at the bend inlet gradually to the $50mm{\times}100mm$ shape at the bend outlet with remaining a constant area. Data signals from the rotating test section are transmitted through a slip ring to the personal computer which is located at the outside of the rotating disc. 3-dimensional velocity and 6 Reynolds stress components were calculated from the equations which correlate the fluctuating and mean voltage values measured with rotating a slant type hot-wire into 6 orientations. The effects of Coriolis and centrifugal forces on the mean motions and turbulence structures are investigated with respect to rotational speed.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.181-191
• /
• 1997

케이블이 가설되기 전까지 외팔보 형태로 지지되는 현수교의 주탑에 불규칙적인 변동 공기력이 작용할 때 발생하는 버페팅은 구조물의 기본 고유진동수와 일치하는 풍속이 존재하고 이에 따른 주탑의 공진에 의해 큰 응답을 유발할 수 있다. 버페팅 하중에 의한 동적 응답을 감소시키기 위해서 제진장치의 일종인 TMD(Tuned Mass Damper)를 부착한 주탑의 거동특성에 관한 연구를 유한요소법에 의하여 시간영역에서 수행하였다. 버페팅 하중을 구하기 위하여 주파수 영역의 속도스펙트럼을 시간영역의 무작위변량으로 변환시켰으며, peak factor를 이용하여 일정기간동안 일어날 수 있는 구조물의 최대 변위의 기대치를 구하였다. 최적의 TMD 부착위치와 제원을 변수별 수치해석을 통하여 결정하였으며, 최적의 제원을 갖는 TMD에 의한 풍속별 진동제어 효과를 검토하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.45-49
• /
• 2006

물분사장치가 부착된 NACA-0021 익 주변의 흐름을 입자영상유속계를 이용하여 고찰하였다. $R_w=6.0261{\times}10^4$에서 영각(a)을 $0^{\circ}{\sim}35^{\circ}$로 변화시켜가며, 물분사 속도를 0[m/s], 9.2[m/s]의 2가지로 조절한 결과 익 후류영역에서는 박리 후 비정상적인(unsteady) 재순환 ${\cdot}$ 재부착 영역이 형성되었으며, 박리영역의 폭이 콴다 효과(Coanda effect)를 갖는 물분사로 인하여 최대 1/3만큼 감소하는 경향을 확인하였다. ?Nㄴ사가 없는 조건에서의 박리는 영각(a) $17^{\circ}{\sim}18^{\circ}$ 부근에서 시작되는 것이 관측되었으나, 물분사를 시켰을 경우 $20^{\circ}{\sim}21^{\circ}$에서 박리가 시작되는 것을 유동관측을 통해 알 수 있었다. 유동계측을 통해 익의 후연부(trailing edge)에서 생성되었던 와(vortex, eddy)가 물제트분사로 인해 소멸되는 것을 알 수 있었고, 영각이 작고 물분사 유속이 빠를수록 박리영역의 감소가 더욱 가속화됨을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.360-364
• /
• 2001

Numerical Aanlysis is made on the thermal performance of micro heat pipe in a axial flat grooved channel. The flow of liquid and vapor is investigated in trapezoidal grooves and the effect of variable shear stress along the interface of the liquid and vapor considered. The results from this study are obtained in the axial variation of pressure difference between vapor and liquid, contact angle, velocity of liquid and vapor and so forth. In addition, maximum heat transport capacity of micro-heat pipe is provided by varying the operation temperature, and compared with that from Schneider and Devos's model in which the interfacial shear stress is neglected.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.355-361
• /
• 1999

The aim of this study is to develop the water quality simulation model (BAYQUAL) that deal with the physical, chemical and biological aspects of fate/behavior of pollutants in the bay. BAYQUAL is a two dimensional, time-variable finite element water quality model based on the flow simulation model in bay(BAYFLOW). The algorithm is composed of a hydrodynamic module which solves the equations of motion and continuity, a pollutnat dispersion module which solves the dispersion-advection equation. The applicability and feasibility of the model are discussed by applications of the model to the Kwangyang bay of south coastal waters of Korea. Based on the field data, the BAYQUAL model was calibrated and verified. The results were in good agreement with measured value within relative error of 14% for COD, T-N, T-P. Numerical simulations of velocity components and tide amplitude(M2) were agreed closely with the actual data.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.1-13
• /
• 2010

Gravure printing and manufacturing of advanced electronic components in a way that is going extra hold position. It is to print the electronic components of the rapid productivity improvements as well as cost-saving and environment-friendly industries such as the transition is a big advantage. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented using gravure printability. The condition of variables of IGT is pressure and velocity. By using Flow-3D simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.