• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1303-1310
• /
• 2016

In this paper, electrocardiogram (ECG) analog front end with supply voltage of 0.5V has been designed and verified by measurements of fabricated chip. ECG is composed of instrument amplifier, 6th order gm-C low pass filter and variable gain amplifier. The instrument amplifier is designed to have gain of 34.8dB and the 6th order gm-C low pass filter is designed to obtain the cutoff frequency of 400Hz. The operational transconductance amplifier of the low pass filter utilizes body-driven differential input stage for low voltage operation. The variable gain amplifier is designed to have gain of 6.1~26.4dB. The electrocardiogram analog front end are fabricated in TSMC $0.18{\mu}m$ CMOS process with chip size of $858{\mu}m{\times}580{\mu}m$. Measurements of the fabricated chip is done not to saturate the gain of ECG by changing the external resistor and measured gain of 28.7dB and cutoff frequency of 0.5 - 630Hz are obtained using the supply voltage of 0.5V.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1927-1928
• /
• 2008

가변 이득 및 차단주파수 특성을 가지는 5차 CMOS Gm-C 필터를 설계하였다. 설계된 필터는 CMOS 차동 트랜스컨덕터들로 구성하였으며 트랜스컨덕터들은 각각 전압 조정에 의하여 트랜스컨덕턴스 값이 변환되도록 설계하였다. 가변 차단주파수 특성은 외부잡음으로 발생할 수 있는 필터 차단주파수의 변형을 보상할 수 있고 한 개의 필터로써 다중대역 수신 단에 적용할 수 있도록 하고자 하였다. HSPICE 시뮬레이션 결과, 1.5MHz$\sim$3.5MHz의 차단주파수의 조정이 가능하였고 이득은 -2.8dB$\sim$2.6dB으로의 조정이 가능하였다.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.745-749
• /
• 2003

The iterative sliding mode observer is proposed to control sensorless PMSM(Permanent Magnet Synchronous Motor). Proposed sliding mode observer has the character which is robust to the disturbance and parameter variation. Low pass filter with the variable cutoff frequency is also proposed to compensate rotor angle, it is led to saving memory and minimizing operation time. Experimental results shows that the proposed sliding mode observer leads to the proper performance.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.25 no.1
• /
• pp.85-92
• /
• 2000

Channel management is critical in designing a cellular mobile system that offers high capacity and high quality. In this paper, an integrated channel management scheme is proposed, which consists of a dynamic channel allocation scheme and an admission control scheme. The dynamic channel allocation scheme allocates a call request the channel which minimizes the impact on its interfering cell, and consists of two types of channel allocation strategies : nominal channel allocation strategy and non-nominal channel allocation strategy. The admission control scheme named the variable cutoff priority scheme reserves some frequency channels for handoff cells in each cell the number of which varies according to the blocking probability of handoff class in that cell. Computationl tests are performed to evaluate the performance of the proposed scheme in terms of overall blocking probability, defined by the weighted value of the blocking probabilities of new calls and handoff calls. The results show that the proposed scheme yields better performance than other compared schemes.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.422-423
• /
• 2018

쇄교자속 기반 센서리스 제어는 저속에서 위치 추정 특성이 우수해 낮은 속도의 운전 영역을 가지는 애플리케이션에 많이 쓰인다. 그러나 계측 정보 오차와 모터 파라미터 변동으로 DC-offset이 발생하는 문제가 있다. 이러한 현상을 방지하기 위해 운전 주파수를 고려한 낮은 차단주파수를 갖는 HPF를 사용했으나, 낮은 DC 저감률로 인해 추정 자속에 DC 성분이 남는 문제점이 있다. 따라서 본 논문에서는 HPF의 차단주파수를 모터 운전주파수에 동기화하여 DC-offset 저감률을 높이고 DC-offset이 시스템에 미치는 정도에 따라 선택적으로 차단주파수를 가변함으로써 위상 앞섬도 감소시키는 방법을 제안한다. 제안된 방법은 Matlab/Simulink에 의해 검증된다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.161-166
• /
• 2014

This Electromagnetic metal piece detection sensor, having high sensitivity even under high humidity and dust density, using LVDT was investigated. Metal detection characteristics using phase detection method, for 3 frequencies covering ELF and LF band, were experimentally measured. It was found that the sensitivity for metal and animal food, in which metal piece was included, was exponentially increased as frequency increased. Reducing cutoff frequency of LPF after PD was found to be effective to proportionally increase sensitivity. Also the sensitivity of metal piece detection was enhanced by optimizing BPF bandwidth and SNR. Metal piece detection limit using available ferrous test samples was found to be 0.7mm diameter from the experiment using 50kHz, in ELF band, which was known to have better selectivity to animal food. is an example of ABSTRACT format.