• The KIPS Transactions:PartB
• /
• v.16B no.2
• /
• pp.123-130
• /
• 2009

Motion estimation (ME) plays an important role in digital video compression. But it limits the performance of image quality and encoding speed and is computational demanding part of the encoder. To reduce computational time and maintain the image quality, integer pel and fractional pel ME methods are proposed in this paper. The proposed method for integer pel ME uses a hierarchical search strategy. This strategy method consists of symmetrical cross-X pattern, multi square grid pattern, diamond patterns. These search patterns places search points symmetrically and evenly that can cover the overall search area not to fall into the local minimum and to reduce the computational time. The proposed method for fractional pel uses full search pattern, center biased fractional pel search pattern and the proposed search pattern. According to block sizes, the proposed method for fractional pel decides the search pattern adaptively. Experiment results show that the speedup improvement of the proposed method over Unsymmetrical cross Multi Hexagon grid Search (UMHexagonS) and Full Search (FS) can be up to around $1.2{\sim}5.2$ times faster. Compared to image quality of FS, the proposed method shows an average PSNR drop of 0.01 dB while showing an average PSNR gain of 0.02 dB in comparison to that of UMHexagonS.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.477-484
• /
• 2006

The purposes of this study were to compare the apical terminus width of simulated curved root canal prepared with three NiTi file systems used by undergraduates for evaluation the effects of flute angle and pitch or radial land on reducing screw-in effect and to determine more safe NiTi file system for inexperienced operators. Fifty inexperienced undergraduate students prepared 150 simulated curved root canals in resin blocks with three NiTi file systems ; ProFile$^{(R)}$, Hero Shaper$^{(R)}$, K3$^{TM}$. The electric motor set at a speed of 300 rpm and torque of 30 in a 16 : 1 reduction handpiece was used. The simulated root canal was prepared to ISO #25 sizes with each file system. The scanned images of pre- and post-instrumented canal of resin block were superimposed. To evaluate the screw-in effect of three NiTi file systems, apical terminus width of root canal was measured from superimposed images and statistical analysis was performed. There were significant differences in three NiTi flle systems. ProFile$^{(R)}$ had significantly smaller width than Hero Shaper$^{(R)}$ and K3$^{TM}$"" (P < 0.05), but no significant difference was observed between K3$^{TM}$ and Hero Shaper$^{(R)}$. Under the condition of this study, active file system (Hero SHaper$^{(R)}$, K3$^{TM}$) with variable pitch and helical angle had more screw-in effect than passive file system (ProFile$^{(R)}$) with constant pitch and helical angle. It seems that the radial lands play more important role in reducing screw-in effect.

• The Korean Journal of Pain
• /
• v.2 no.2
• /
• pp.135-144
• /
• 1989

Celiac plexus block is recommended in patients with intractable upper abdominal cancer pain. The success rate of a celiac plexus block is variable among the authors. One of the causes of this is the anatomical variations of the celiac plexus. There has not been a study concerning anatomical observations of the celiac plexus in Korean cadavers. So, anatomical dissections were performed and observations were made of the celiac plexus and related structures in Korean cadavers. The results were as follows: 1) The subjects were 21 male bodies and 5 female bodies. The mean age at death was $69.9{\pm}15.5$ years (range 37~93). The mean height was $155.5{\pm}8.3\;cm$ (range 143~172). 2) The number of celiac ganglia ranged from 1~4. The mean numbers were $2.3{\pm}1.9$ in the right plexus and $1.9{\pm}0.8$ in the left, and the mean sizes were $18.9{\pm}7.7{\times}8.0{\pm}3.8\;mm^2$ and $18.5{\pm}8.3{\times}9.5{\pm}3.9\;mm^2$ respectively. 3) Celiac ganglia were most frequently located at the level of the upper third and middle third of L1 in both sides (65.5% in right, 64.0% in left). The vertical range of celiac ganglia ranged from 1 space, which is one third the height of one vertebral body, to 4 spaces. Mean vertical ranges were $1.5{\pm}0.6$ spaces in the right plexus and $1.6{\pm}0.7$ spaces in the left. The celiac ganglia located at the level of the upper third of L1 in the right and the lower third of L1 in the left side, had the largest vertical ranges respectively ($1.8{\pm}0.5$ spaces in right, $2.3{\pm}0.6$ spaces in left) 4) Right side celiac ganglia were located near the midline of the vertebrae compared to the left ones (mean 5.0 mm) The horizontal dimension was greater in the right ganglia ($24.2{\pm}9.2\;mm$) than in the left ganglia ($l8.8{\pm}7.0\;mm$). 5) There was no vertebral level difference between both celiac ganglia in most cases (60%). However, of the 40% of cases at different levels, in half of these (20%) the right ganglia were located higher than the left ganglia; and in the other 20%, this was reversed. 6) The origin sites of the celiac artery were most frequently in the upper third and middle third of L1 (61.6%). The celiac ganglia were usually located at the same level as the site of origin of the celiac artery (61.6% in right, 52.0% in left). 7) The vertebral level of the splanchnic nerves piercing the abdominal surface of the diaphragm was most frequently in the upper third and middle third of L1 (66.6% in right, 66.7% in left). 8) The level of the origin of diaphragmatic crura from the anterior surface of the vertebral bodies varied from the L1-L2 interspace to the L3-L4 interspace. Right crura most frequently originated at the level of the lower third of L2 to the upper third of L3 (57.6%), while left crura originated from the level of the L2-L3 interspace to the middle third of L3 (69.3%). From the above results, we realized that there were some anatomical variations of the celiac plexus and its relations to adjacent structures in Korean bodies. However, when the needle point is behind the anterior margin of the upper third of L1, it is possible to perform a successful retrocrural splanchnic nerve block.

• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.1-16
• /
• 2002

Purpose : Three dimensional conformal radiotherapy planning is being used widely for the treatment of patients with brain tumor. However, it takes much time to develop an optimal treatment plan, therefore, it is difficult to apply this technique to all patients. To increase the efficiency of this technique, we need to develop standard radiotherapy plant for each site of the brain. Therefore we developed several 3 dimensional conformal radiotherapy plans (3D plans) for tumors at each site of brain, compared them with each other, and with 2 dimensional radiotherapy plans. Finally model plans for each site of the brain were decide. Materials and Methods : Imaginary tumors, with sizes commonly observed in the clinic, were designed for each site of the brain and drawn on CT images. The planning target volumes (PTVs) were as follows; temporal $tumor-5.7\times8.2\times7.6\;cm$, suprasellar $tumor-3\times4\times4.1\;cm$, thalamic $tumor-3.1\times5.9\times3.7\;cm$, frontoparietal $tumor-5.5\times7\times5.5\;cm$, and occipitoparietal $tumor-5\times5.5\times5\;cm$. Plans using paralled opposed 2 portals and/or 3 portals including fronto-vertex and 2 lateral fields were developed manually as the conventional 2D plans, and 3D noncoplanar conformal plans were developed using beam's eye view and the automatic block drawing tool. Total tumor dose was 54 Gy for a suprasellar tumor, 59.4 Gy and 72 Gy for the other tumors. All dose plans (including 2D plans) were calculated using 3D plan software. Developed plans were compared with each other using dose-volume histograms (DVH), normal tissue complication probabilities (NTCP) and variable dose statistic values (minimum, maximum and mean dose, D5, V83, V85 and V95). Finally a best radiotherapy plan for each site of brain was selected. Results : 1) Temporal tumor; NTCPs and DVHs of the normal tissue of all 3D plans were superior to 2D plans and this trend was more definite when total dose was escalated to 72 Gy (NTCPs of normal brain 2D $plans:27\%,\;8\%\rightarrow\;3D\;plans:1\%,\;1\%$). Various dose statistic values did not show any consistent trend. A 3D plan using 3 noncoplanar portals was selected as a model radiotherapy plan. 2) Suprasellar tumor; NTCPs of all 3D plans and 2D plans did not show significant difference because the total dose of this tumor was only 54 Gy. DVHs of normal brain and brainstem were significantly different for different plans. D5, V85, V95 and mean values showed some consistent trend that was compatible with DVH. All 3D plans were superior to 2D plans even when 3 portals (fronto-vertex and 2 lateral fields) were used for 2D plans. A 3D plan using 7 portals was worse than plans using fewer portals. A 3D plan using 5 noncoplanar portals was selected as a model plan. 3) Thalamic tumor; NTCPs of all 3D plans were lower than the 2D plans when the total dose was elevated to 72 Gy. DVHs of normal tissues showed similar results. V83, V85, V95 showed some consistent differences between plans but not between 3D plans. 3D plans using 5 noncoplanar portals were selected as a model plan. 4) Parietal (fronto- and occipito-) tumors; all NTCPs of the normal brain in 3D plans were lower than in 2D plans. DVH also showed the same results. V83, V85, V95 showed consistent trends with NTCP and DVH. 3D plans using 5 portals for frontoparietal tumor and 6 portals for occipitoparietal tumor were selected as model plans. Conclusion : NTCP and DVH showed reasonable differences between plans and were through to be useful for comparing plans. All 3D plans were superior to 2D plans. Best 3D plans were selected for tumors in each site of brain using NTCP, DVH and finally by the planner's decision.