• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2634-2638
• /
• 2009

The variable structure control(VSC) with sliding mode is the discontinuous control law in leads to undesirable chattering in practice. As a method solving this problem, in this paper, we propose a scheme of the VSC with neural network sliding surface. A neural network sliding surface with boundary layer is employed to solve discontinuous control law. The proposed controller can eliminate the chattering problem of the conventional VSC. The effectiveness of the proposed control scheme is verified by simulation results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.70-78
• /
• 1989

In the control of the robot system using the variable structure control(VSC) method, up to these days the advantage of the VSC method has not been applied effectively because the parameters are selected arbitrarily by the existence condition of sliding mode without a precise analysis about the VSC parameters. This paper reveals the relation between dynamic constraints and the VSC parameters of robot system, and analyzes the effect on the trajectory of the joint angle and the hand when the analytical result of the relation is applied to the robot system control. The result of the analysis in this paper is applied effectively to the path tracking control and the trajectory planning using the VSC method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1178-1183
• /
• 2008

The variable structure control(VSC) with sliding mode is an important and interesting topic in modern control of nonlinear systems. However, the discontinuous control law in VSC leads to undesirable chattering in practice. As a method solving this problem, in this paper, we propose a scheme of the VSC with neural network sliding surface. A neural network sliding surface with boundary layer is employed to solve discontinuous control law. The proposed controller can eliminate the chattering problem of the conventional VSC. The effectiveness of the proposed control scheme is verified by simulation results.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.3
• /
• pp.20-27
• /
• 2010

A vehicle suspension system performs two functions, the ride quality and the stability, which conflict with each other. An active suspension system has an external energy source, from which energy is always supplied to the system for continuous control of vehicle motion. Therefore, an active suspension system can have even more improved performance. Some control laws have been proposed for active suspension system, but in this paper, an optimal variable structure control(VSC) is proposed. The VSC method is well suited for a class of nonlinear system and can address the robustness issues to constant modelling errors and disturbances. This paper develops an optimal VSC controller and compares its performance to those of a passive suspension system and an active suspension system with an optimal controller. The transient and frequency responses are analyzed respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.2
• /
• pp.30-39
• /
• 1989

Variable structure control (VSC) systems control the state vectors using sliding regime (SR) constructed switching logic, switching plane and control law. Saturation function switching logic is used to improve the drawback which occurs in traditional sign function switching logic. Switching plane with time-varying parameter is proposed to improve the drawback which occurs in switching plane with constant parameter and it is suggested the control law which has time-varying parameter. The stability of VSC system controlled by proposed time-varying SR is discussed, and the good control behavior was shown through computer simulation using proposed SR.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.10
• /
• pp.915-921
• /
• 2004

In this paper, a variable structure controller(VSC) is used to control the position of the hydraulic servo system subjected to unknown disturbances. The system consists of two cylinders, which connected in series. One cylinder executes position control, the other executes force control to generate disturbances. In order to control each cylinder, interaction must be considered between two cylinders because two cylinders are connected in series. Therefore, the controller is designed regarding interaction between two cylinders as disturbances. Performance of the proposed controller was verified through experiments and compared to PID controller. The experiments showed that the proposed controller had a good performance and robustness.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1041-1043
• /
• 1993

A robust position control scheme for a Brushless Direct Drive Motor(BLDDM) is presented. To obtain the robustness under the load variation, a Variable Structure Controller(VSC) is used. However, the VSC has a chattering problem and require the full state informations. To overcome this problem, in this paper, the sliding mode observer is used for compensating the load disturbance and estimating the motor velocity. As a result, the VSC for a BLDDM posision control is designed by using only position measurment and the chattering problem is greatly reduced. To show the validaty of the proposed scheme, the simulation study is carried out.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.1
• /
• pp.60-67
• /
• 1989

In this paper, a methodology is developed to remove the high frequency chattering phenomenon which is the common drawbacks of variable structure control(VSC) system. An improved control law is proposed to achieve continuous control input whose terms are continuous functions during the control process under switching plane, which removes chattering and is robust as well. The methodology developed in this paper is applied to attitude control for spacecraft and the simulated results are compared with those of typical VSC methodology.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.213-220
• /
• 1989

This paper describes the application of the variable structure control(VSC) concept for the position control of an electro-hydraulic servomotor system. The basic philosopy of VSC is that the structure of the feedback control is altered as the state crosses discontinuity surfaces in the state space with the result that certain desirable properties are achieved. The switching of the control function yields total(or selective) invariance to system parameter variations and disturbances, and closed loop eigen value placement in time-varing and uncertain systems. The control scheme is derived, implemented and tested in the laboratory where analog controller have been used to control the representive servosystem. The control system schematics are given and simple results are shown for illustration. And the results of variable structure system for the electro-hydraulic servomotor were compared to that of the fixed structure system when load disturbance and system parameter variation exists.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1995

In this paper, the FLVSC (Fuzzy Logic Variable Structure controller), of which control rules are extracted from the concepts of the VSC(Variable Structure control) is proposed and diesgned for drum motor(BLDC motor) in home VCR. The FLC (Fuzzy Logic Controller) based on linguistic rules has the advantages of not needing of some exact mathermatical model for plant to be controlled. The proposed method has the characteristics which are viewed in conventional VSC, e.g. insensitivity to a class of distrubances, parameter variations and uncertainites in a sliding mode. In addition, the method has the properties of the FLC-noise rejection capability etc. The computer simulation and experiment using DSP(TMS320C30) have been carried out for the servo control of VCR drum motor to show the usefulness of the proposed method.