• 융합신호처리학회논문지
• /
• 제8권2호
• /
• pp.119-123
• /
• 2007

본 논문은 유도전동기의 센서리스 속도제어기에 대한 연구이다. 유도전동기의 속도의 제어방법은 자속추정을 위한 기준모델로써 부하-토크 관측기를 이용한 MRAS(Model Reference Adaptive System)를 기초로 하였으며, 전형적인 MRAS 제어기 특성의 속도응답은 부하 토크 외란의 변화에 영향을 미친다. 따라서 제안된 시스템에서의 부하-토크 관측기를 사용한 속도제어 특성은 부하 토크 외란에 의한 영향을 받지 않는다. 이러한 제어 알고리즘을 MATLAB의 SIMULINK를 통해 전체 시스템을 모델링하여 시뮬레이션 한 결과는 유도 전동기의 다양한 부하 구동 적용에 대한 슬라이딩 속도 제어기의 효과적인 개선이 되었음을 알 수 있었다. 그러므로 이러한 제어 방법들이 산업 응용분야에 확대되어 적용되었으면 한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.215-218
• /
• 2000

The windup phenomenon appears and degrades control performance when a controller with integrating action is used and the plant input is limited. An anti-windup integral -proportional(IP) controller is proposed for the variable-speed motor drives and it is experimentally applied to the speed control of a vector-controlled induction motor driven by a pulse width modulated (PWM) voltage source inverter(VSI). Although the operating conditions like motor load and speed command is changed under the limited plant input it is experimentally verified that the speed response has much improved performance such as no overshoot and fast settling time and the maximum plant input is also effectively utilized.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.171-176
• /
• 1997

This paper presents a design method of the continuous inertial binary observer which includes the rotor flux and speed estimations. The sliding observer based on the variable structure theory ensures the robustness of disturbance and is applied for the method to keep an insensitivity for the variations of parameter. Sliding observer, however, has a high-frequency chattering deteriorating the state estimation performance. To reduce the chattering on the sliding surface in sliding observer and improve the estimation performance, binary observer scheme which has main advantages such as the absence of high-frequency chattering and the finite gains is applied in this paper. Computer simulation results show the effectiveness of binary observer proposed here for the induction motor drives.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.100-107
• /
• 2003

This study was to control magnetic field orientation-typed sensorless vector control by applying the theory of a rotor flux observer to drive an induction motor. This research suggested a new speed estimation method that estimates speed with the rotor flux obtained by using a flux observer and the variable of state current detected by a current sensor without a speed sensor. Because the speed estimation method is independent from the motor constants, it is not necessary to control the gain of the parameters and the algorithm is simple. In the findings of the study, the researcher was convinced of the control function and the possibility of realization in the simulation experiment of sensorless vector control system by using DSP(Digital Signal Prosessor).

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.91-102
• /
• 1999

The paper describes a robust adaptive control algorithm for induction motor drive without speed sensor at low speed range. The control algorithm use only current sensors in a space vector pulse width modulation within loop control with rotor speed estimation and voltage source inverter. On-line rotor speed estimation is based on utilizing parallel model reference adaptive control system. MRAC of the modified flux model for flux and rotor speed estimator uses dual-adaptation mechanism, ${\omega}_r$ and ${\omega}_e$ scheme. The estimated flux components in the model can be compensated from the effects of offset errors on pure integrals. It can be compensated to the parameter variations and torque fluctuation with speed estimation in less then 10 rad/sec. In a simulation, the proposed induction motor control algorithm without speed sensor at very low speed range are shown to operate very well in spite of variable rotor time constant and fluctuating load without change the controller parameters. The suggested control strategy and estimation method have been validated by simulation study, and it proposed the designed system for the implementation using TI320C31 DSP/ASIC controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.699-702
• /
• 1992

A miniature size electrostatic induction motor have been constructed and studied by applying a three phase ac power source with a maximum voltage of 5 KV and a variable frequency ranged 0.0 - 150 Hz. A maximum no load speed of the motor tested was about 7600 RPM at the applied voltage of 4330 volt and the frequency of 130 Hz for the case of the rotor surface material of polyprophylene sheet screen-printed $TiO_2$ powder on it. It is found that there are 3 different regions of the motor operation, a rotor stop region, a stable operation region and a high speed abnormal region. And it is also found that the motor speed is influenced greatly by the charge relaxation time constant of the rotor surface materials, which however was changed by the means of vapour-deposited Ti or Ni and screen-printed $TiO_2$ powder on the surface of the rotor material, polyprophylene.

• 전력전자학회논문지
• /
• 제7권2호
• /
• pp.137-148
• /
• 2002

직접토크제어 기법은 벡터제어계 설계 및 운전시 요구되는 복잡한 좌표변환과 전류제어루프가 불필요하며, 빠른 토크응답을 얻을 수 있기 때문에 벡터제어 기법에 버금가는 유도전동기의 고성능 제어기법으로 인정되고 있다. 본 논문에서는 직접토크제어 기법 적용시 중요한 어려움의 하나로 지적되고 있는 저속영역에서의 자속저하 및 이로 인한 전류고조파의 증가 문제를 해결하기 위한 대책으로서 퍼지 가변 스위칭섹터 기법과 이 기법의 실시간 적용을 위한 실현방법을 제안하였다. 제안된 스위칭섹터 기법을 포함한 유도전동기 제어시스템의 실험적 성능을 고찰하기 위하여 DSP를 이용한 제어보드를 제작하였다. 시뮬레이션과 실험 결과는 제안된 퍼지 가변스위칭 섹터 기법을 도입함으로서 유도전동기 드라이브의 성능이 현저히 개선됨을 보여준다.

• 조명전기설비학회논문지
• /
• 제16권2호
• /
• pp.54-58
• /
• 2002

PID제어기는 산업자동화 설비에 널리 쓰이고 있다. 하지만 시스템 특성이 변화하면, 정밀제어를 위한 매개변수 결정과 동조가 쉽지 않다. 이를 해결하기 위한 방법으로 본 논문에서는 PLC를 사용한 전문가 자동동조 PID 제어기를 제안하였다. 전문가 자동동조 알고리즘은 Ziegler-Nichols의 계단응답법과 전문가 지식을 기초로 하였다. 제어의성능 실험은 가변부하시 유도모터 속도제어의 수행에 의하여 확인하였다.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.989-999
• /
• 2014

High-performance Current Source Inverter (CSI)-fed, variable speed alternating current drives are prepared for various industrial applications. CSI-fed Induction Motor (IM) drives are managed by using different control methods. Noteworthy methods include scalar Control (V/f), Input-Output Linearization (IOL) control, Field-Oriented Control (FOC), and Direct Torque Control (DTC). The objective of this work is to compare the dynamic performance of the aforementioned drive control methods for CSI-fed IM drives. The dynamic performance results of the proposed drives are individually analyzed through sensitivity tests. The tests selected for the comparison are step changes in the reference speed and torque of the motor drive. The operation and performance of different vector control methods are verified through simulations with MATLAB/Simulink and experimental results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.9-15
• /
• 2006

The conventional hysterysis band DTC(Direct Torque Control) strategy have relatively high torque ripple at low speed and variable switching frequency according to motor speed even though it provides a fast torque response with very simple scheme consisted with only two hysteresis band comparators and a switching table for torque and flux control. In this paper, author proposed a new DTC scheme based on the torque slope and reference voltage control. The new scheme can maintain the minimized torque ripple and constant switching frequency. Experimental tests carried out with an 1.5kW induction motor drive system show improved dynamic characteristics and prove the feasibility of proposed strategy.