• 제목/요약/키워드: Variable Source Area Concept

검색결과 4건 처리시간 0.023초

지표포화지역-중간류유출-흙수분저류량 관계: II. 동적 분석 (Surface Saturation Area-Subsurface Outflow-Soil Moisture Storage Relationships: II. Dynamic Analysis)

  • 이도훈;이은태
    • 물과 미래
    • /
    • 제29권2호
    • /
    • pp.143-151
    • /
    • 1996
  • 중간류 유출, 지표표화지역, 흙수분저류량들의 동적 반응을 Richards 방정식을 이용한 수치실험을 통하여 유도하였다. 그리고 수치실험에서 경사면 모양, 토양종류, 경계조건 등을 변화시켜서 지표포화지역-중간류유출 동적 관계 및 지표포화지역-흙수분저류량 동적 관계를 결정하였다. 모의결과에 의하면, 지표포화지역-중간류유출 동적 관계 및 지표포화지역-흙수분 저류량 동적 관계는 각 관계들의 정상류 관계에 의해 근사적으로 설명될 수 있다. 그리고 강우양상이 단순한 펄스입력일지라도 중간류유출 및 지표포화지역의 동적 반응은 중복첨두치에 의해 특징지어지며, 중복첨두치의 발생에 대한 물리적 메케니즘은 "variable source area"의 개념을 이용하여 설명하였다.용하여 설명하였다.

  • PDF

영구자석을 이용한 전단모드 MR 댐퍼 설계 및 해석 (Design and Analysis of Magneto-Rheological Damper Using Permanent Magnet)

  • 김완호;칼루반 수레쉬;박진하;최상민;박춘용;강제원;최승복
    • 한국소음진동공학회논문집
    • /
    • 제26권4호
    • /
    • pp.443-448
    • /
    • 2016
  • A novel Permanent Magnet based Magneto Rheological (PM-MR) damper is proposed in this paper. The principle of proposed MR damper is achieved by designing a linearly varying magnetization area with-respect to the movable permanent magnetic based piston setup. Nowadays, commercially available MR damper uses electromagnetic coils for generating the variable magnetic fields corresponding to the variable damping force. The amount of magnetic field produced by the electromagnetic coils are depends on the biasing current of voltage source. The key enabling concept of the proposed MR damper is to replace the electromagnetic coils and the voltage sources by utilizing the variable area based permanent magnetic piston setup. The proposed unique design structure of PM-MR damper has an increasing shear mode damping force with the piston movement in both jounce and rebound motion. In this research, analytical model of the proposed structure is derived and the structural design of proposed concept is verified using numerical CAD tool. As a result, the damping force is increase when piston movement in both jounce and rebound motion.

Development of Hydrologic Simulation Model for the Prediction of Long-Term Runoff from a Small Watershed

  • 고덕구;권순국
    • 한국농공학회지
    • /
    • 제32권E호
    • /
    • pp.33-46
    • /
    • 1990
  • Abstract Over 700/0 of the rural land area in Korea is mountainous and small watersheds provide most of the water resources for agricutural use. To provide an appropriate tool for the agricultural water resource development project, SNUA2, a mathematical model for simulating the physical processes governing the precipitation-runoff relationships and predicting the storm and long-term runoff quantities from the small mountainous watersheds was developed. The hydrological characteristics of small mountainous watersheds were reviewed to select appropriate theories for the simulation of the runoff processes, and a deterministic and distributed model was developed. In this, subsurface flows are routed by solving Richard's two dimensional equation, the dynamics of soil moisture contents are simulated by the consideration of phenological factors of canopy plants and surface flows are routed by solving the kinematic wave theory by numerical analysis. As a result of an application test of the model to the Sanglim watershed, peak flow rates of storm runoff were over-estimated by up to 184.2%. The occurence time of peak flow and total runoff volume of storm runoffs simulated were consistent with observed values and the annual runoff volumes were simulated in the error range of less than 5.8%.

  • PDF

Research to Achieve Uniform Plasma in Multi-ground Capacitive Coupled Plasma

  • 박기정;이윤성;유대호;이진원;이정범;장홍영
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.247.1-247.1
    • /
    • 2014
  • The capacitive coupled plasma is used widely in the semiconductor industries. Especially, the uniformity of the industrial plasma is heavily related with defect ratio of devices. Therefore, the industries need the capacitive coupled plasma source which can generate the uniform plasma and control the plasma's uniformity. To achieving the uniformity of the large area plasma, we designed multi-powered electrodes. We controlled the uniformity by controlling the power of each electrode. After this work, we started to research another concept of the plasma device. We make the plasma chamber that has multi-ground electrodes imaginary (CST microwave studio) and simulate the electric field. The shape of the multi-ground electrodes is ring type, and it is same as the shape of the multi-power electrodes that we researched before. The diameter of the side electrode's edge is 300mm. We assumed that the plasma uniformity is related with the impedance of ground electrodes. Therefore we simulated the imaginary chamber in three cases. First, we connected L (inductor) and C (capacitor) at the center of multi-ground electrodes. Second, we changed electric conductivity of multi-ground electrode. Third, we changed the insulator's thickness between the center ground electrode and the side ground electrode. The driving frequency is 2, 13.56 and 100 MHz. We switched our multi-powered electrode system to multi-ground electrode system. After switching, we measured the plasma uniformity after installing a variable vacuum capacitor at the ground line. We investigate the effect of ground electrodes' impedance to plasma uniformity.

  • PDF