• 방사성폐기물학회지
• /
• 제12권3호
• /
• pp.179-189
• /
• 2014

파이로 공정은 사용후핵연료 관리 이슈 해결과 유용자원 재활용 제고의 목적으로 개발되고 있다. 파이로 공정 중 전해환원 공정은 LiCl을 전해질로 사용하여 산화물을 금속으로 전환시키는 공정으로 금속 전환체에 잔류염이 포함되므로 후속 공정이 요구된다. 진공 증류 공정은 다양한 용융염계에서 적용되어 왔으며 금속 전환체에서도 활용될 수 있다. 전해환원 금속 전환체 잔류염은 LiCl과 알카리 및 알카리토 금속 염화물을 포함한다. 본 연구에서는 이들 염화물들의 증기압을 추산하여 진공 증류 공정에서 잔류 액체의 조성변화를 계산하였다. 증류된 기체가 일정하게 제거되는 조건에서 물질수지와 기-액 평형식을 결합한 모델을 개발하였으며 증기압을 이용하여 무차원 시간에 대한 액체 조성 변화를 계산하였다. 공정 조건 변화 모사를 위해 온도와 용융염 조성을 변화시켜 거동을 비교하였다. 잔류염의 증류는 주성분인 LiCl에 의해 지배되었으며 LiCl 보다 증기압이 높은 CsCl은 쉽게 제거될 것이 예상되었다. 증기압이 유사한 RbCl은 LiCl과 일정한 조성이 유지되었다. 반면 증기압이 낮은 $SrCl_2$와 $BaCl_2$는 시간에 따라 농축되며 초기 조성이 높은 경우 증류 과정에서 석출될 가능성이 있는 것으로 예상되었다.

• 한국전산유체공학회지
• /
• 제5권3호
• /
• pp.1-7
• /
• 2000

In high-pressure diesel engine, the injected fuel spray impinges on the piston cavity surface due to the short distance between the injection nozzle and the cavity wall. The behavior of the impinging spray has the great influence on the dispersion of fuel, the evaporation, and the mixture formation process. In this study, the numerical simulation using the GTT code was performed to study the gas flows, the spray behaviors, and the fuel vapor distributions in the combustion of a D.I engine for variation of spray angle and swirl ratio.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.214-219
• /
• 2002

In order to elucidate the crystallographic orientation dependence of electrical properties of carbon (C)-doped GaAs epilayers, C incorporation into GaAs epilayers on high-index GaAs substrates with various crystallographic orientations from (100) to (111)A has been performed by a low pressure metalorganic chemical vapor deposition using C tetrabromide ($CBt_4$) as a C source. The hole concentration of C-doped GaAs epilayers rapidly decreases with a hump at (311)A with increasing the offset angle. Although the growth temperature and the V/III ratio are varied, the crystallographic orientation dependence of hole concentration show a same trend. The above behaviors indicate that the bonding strength of As sites on a glowing surface plays an important role in the C incorporation into the high-index GaAs substrates.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1096-1105
• /
• 1996

A theoretical model of the frost formation has been presented to investigate the characteristics of the growth of frost layer by considering molecular diffusion of water vapor and heat generation caused by sublimation of water vapor in the frost layer. The present model was compared with existing experimental data as well as a previous model. The difference between the present model and existing experimental data was found to be about 6 percent. An analysis for the behavior of frost formation using present model shows a good agreement with the trend for a number of experimentally observed features. The present analysis can also provide the physical understanding on the phenomena of the frost formation.

• Bulletin of the Korean Chemical Society
• /
• 제18권8호
• /
• pp.841-850
• /
• 1997

A simple molecular theory of mixtures is formulated based on the nonrandom two-fluid lattice-hole theory of fluids. The model is applicable to mixtures over a density range from zero to liquid density. Pure fluids can be completely characterized with only two molecular parameters and an additional binary interaction energy is required for a binary mixture. The thermodynamic properties of ternary and higher order mixtures are completely defined in terms of the pure fluid parameters and the binary interaction energies. The Quantitative prediction of vapor-liquid, and solid-vapor equilibria of various mixtures are demonstrated. The model is useful, in particular, for mixtures whose molecules differ greatly in size. For real mixtures, satisfactory agreements are resulted from experiment. Also, the equation of state (EOS) is characterized well, even the liquid-liquid equilibria behaviors of organic mixtures and polymer solutions with a temperature-dependent binary interaction energy parameter.

• 한국분무공학회지
• /
• 제28권3호
• /
• pp.113-118
• /
• 2023

This study investigates the evaporation characteristics of paired sessile droplets on a heated substrate. In particular, the evaporation time and contact line behaviors were analyzed based on the droplet-to-droplet distance and substrate temperature. The contact line behavior and volume variations were visualized using the shadowgraph method. It was observed that the contact diameter and contact angle exhibited similar behavior for both single and paired droplets regardless of the droplet-to-droplet distance and substrate temperature. The paired droplets demonstrated a longer evaporation time than the single droplet due to the vapor accumulation between the droplets. Furthermore, the scaled lifetime, defined as the ratio of evaporation time between paired and single droplets, increased as the droplet-to-droplet distance decreased and decreased as the substrate temperature increased, attributed natural convection.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.52-55
• /
• 1988

Tunsten silicide (WSix) films on polycrystalline silicon were formed by low-pressure chemical vapor deposition (LPCVD) and were annealed in $N_2$ for 30 mins at various temperatures. The annealing behaviors of tungsten silicide films have been investigated by electrical resistivity measurements, X-ray diffraction methods, scanning electron microscopy (SEM) and Hall measurements. The electrical resistivity decreased almost linearly with increasing annealing temperature and reached $35{\mu}{\Omega}-cm$ at $1000^{\circ}C$ annealing. The X-ray and SEM analyses indicate that crystallization of $WSi_2$ and grain growth occurs when annealed above $1000^{\circ}C$. Excess silicon redistribution occurs considerably when annealed above $1000^{\circ}C$. By Hall measurements, the carrier type for specimens annealed at $1000^{\circ}C$ was found to be positive holes, while the carriers were electrons in the specimens that were annealed at $800^{\circ}C$.

• 한국표면공학회지
• /
• 제35권4호
• /
• pp.211-217
• /
• 2002

Ti-Si-N films were deposited onto WC-Co substrate by a RF-PECVD technique. The deposition behaviors of Ti-Si-N films were investigated by varying the deposition temperature, RF power, and reaction gas ratio (Mx). Ti-Si-N films deposited at 500, 180W, and Mx 60% had a maximum hardness value of 38GPa. The microstructure of films with a maximum hardness was revealed to be a nanocomposite of TiN crystallites penetrated by amorphous silicon nitride phase by HRTEM analyses. The microstructure of maximum hardness with Si content (10 at.%) was revealed to be a nanocomposite of TiN crystallites penetrated by amorphous silicon nitride phase, but to have partly aligned structure of TiN and some inhomogeniety in distribution. and At above 10 at.% Si content, TiN crystallite became finer and more isotropic also thickness of amorphous silicon nitride phase increased at microstructure.

• 통합자연과학논문집
• /
• 제3권4호
• /
• pp.202-205
• /
• 2010

Nanocrystalline porous silicon surfaces have been used to detect nitroaromatic compounds in vapor phase. The mode of photoluminescence is emphasized as a sensing attitude or detection technique. Quenching of photoluminescence from nanocrystalline porous surfaces as a transduction mode is measured upon the exposure of nitroaromatic compounds. Reversible detection mode for nitroaromatics is, too, observed. To verify the detection afore-mentioned, photoluminescent freshly prepared porous silicons are functionalized with different groups. The mechanism of quenching of photoluminescence is attributed to the electron transfer behaviors of quantum-sized nano-crystallites in the porous silicon matrix to the analytes(nitroaromatics). An attempt has been done to prove that the surface-derivatized photoluminescent porous silicone surfaces can act as versatile substrates for sensing behaviors due to having a large surface area and highly sensitive transduction mode.

• Tribology and Lubricants
• /
• 제22권3호
• /
• pp.127-130
• /
• 2006

DLC (Diamond Like Carbon) films show very desirable surface interactions with high hardness, low friction coefficient, and good wear-resistance properties. The friction behavior of hydrogenated DLC film is dependent on tribological environment, especially surrounding temperature. In this work, the tribological behaviors of DLC (Diamond-like carbon) films, prepared by the radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) method, were studied in elevated temperatures. The ball-on-disk tests with DLC films on steel specimens were conducted at a sliding speed of 60 rpm, a load of 10N, and surrounding various temperatures of $25^{\circ}C,\;40^{\circ}C,\;55^{\circ}C\;and\;75^{\circ}C$. The results show considerable dependency of DLC tribological parameters on temperature. The friction coefficient decreased as the surrounding temperature increased. After tests the wear tracks of hydrogenated DLC film were analyzed by optical microscope, scanning electron spectroscopy (SEM) and Raman spectroscopy. The surface roughness and 3-D images of wear track were also obtained by an atomic force microscope (AFM).