• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.946-949
• /
• 2003

This paper reports on the fluid flow simulation results of a multilayer type piezoelectric valve. The mechanical and fluidic analysis are done by finite element method. The designed structure is normally closed type using buckling effect, which is consist of three separate structures; a valve seat die, an actuator die and a MLCA(Multilayer Type Ceramic Actuator). It is confirmed that the complete laminar flow and the lowest flow leakage are strongly depend on the valve seat geometry. In addition, turbulent flow was occurs in valve outlet according to increase seat dimension, height and inlet pressure. From this, we was deducts the optimum geometry of the valve seat and diaphragm deflection that have an great influence fluid flow in valve. Thus, it is expected that our simulation results would be apply for piezoelectric applications such as valve and pump, fluidic control systems.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.731-736
• /
• 2011

우주발사체 추진기관 공급계에서 공압구동용 솔레노이드밸브는 제어시시템의 명령이 주어지면 구동가스 배관의 통로를 개폐해서 공압제어장치를 작동시킨다. 공압구동용 솔레노이드밸브의 제작에 앞서 설계검증 및 기본적인 작동특성을 분석하기 위해 AMESim 상용코드를 이용하여 해석모델을 수립하였다. 입구압력에 따른 작동시간을 시험결과와 비교하여 모델을 검증하였고 내부유동 해석결과 (FLUENT)를 이용하여 3차원 형상을 고려하여 모델의 정확도를 높였다. 밸브모델을 이용하여 다양한 설계변수에 따른 밸브의 개폐압력, 작동시간을 계산하여 설계인자 검증 및 작동성능을 분석하였다. 설계변수인 컨트롤밸브의 시트 형상, 주 밸브와 배출밸브의 시트 형상, 실링 직경비, 컨트롤 캐비티부피에 대해 밸브의 동특성 해석을 수행하였다. 해석을 통해 밸브 개폐작동시간, 작동성능, 개방압력을 예상하였다. 본 연구 결과는 한국형발사체 공급계 공압구동용 솔레노이드밸브의 설계/해석능력을 확보하고 밸브의 개발과정에서 효율성을 높일 수 있으며 파생형 밸브의 설계 및 선행연구에 적용할 수 있을 것으로 판단된다.

• International journal of advanced smart convergence
• /
• 제6권4호
• /
• pp.1-8
• /
• 2017

In this work, the effects of fairly influential factors on performance of vacuum system, such as constant pressure and outgassing effect were simulated to propose the optimum design factors. Outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for vacuum systems were suggested based on the simulation results. And, the effects of throttle valve applications on vacuum characteristics were also simulated to obtain the optimum design model of variable conductance on high vacuum system. Simulated vacuum characteristics of the proposed modelling were agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve were schematized as the modelling of throttle valve for the constant process-pressure. Simulation results were plotted as pump-down curve of chamber and variable conductance of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.179-187
• /
• 2001

In this paper, a primary pressure regulating type ratio control system is developed for a metal belt CVT, and the CVT ratio changing characteristics are investigated by simulation and experiment. The hydraulic part of the ratio control system has a simple structure with one 3-way spool valve as a main ratio control valve and one bleed type variable force solenoid as a pilot valve. The mathematical modelling of the CVT hydraulic system is derived by considering the CVT shift dynamics. Simulation results of CVT speed ratio and the primary pressure agree with the experimental results demonstrating the validity of the dynamic models. It is found from the simulation and experimental results that the response time of speed ratio and primary pressure can be shortened by increasing the ratio control valve port area, and the size of feedback orifice of ratio control valve gives a damping effect on the primary pressure oscillation.

• 한국유체기계학회 논문집
• /
• 제9권2호
• /
• pp.13-18
• /
• 2006

This paper was studied to design Process considered flexibility and reliability of suction and discharge valves. Flexibility and reliability of valves are main important factors in compressor valves design. And they are incompatible with efficiency of compressor. In this study, we have performed the optimal design of CO2 compressor valves to consider these factors. At first, we analyzed performance simulation of compressor to obtain optimal flexibility level of valves. From this simulation, we could get some important data at valve design like the optimal natural frequency and the height of retainer. After that we studied to reliability of valves corresponding to optimal flexibility level by finite element method. For each case bending stress and natural frequency were obtained by it. Also we investigated the fatigue stability to obtain optimal valve shape that ensured to reliability.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.51-58
• /
• 2002

A simulation model has been developed to predict the performance of 5-valve gasoline engine by gas exchange process with combustion model. In this study, we simulated the intake flow characteristics and performance of 5-valve engine with entwine speed and we compared the 5-valve engine performance with that of 4-valve engine. As a result. the calculated value was in consistency with the measured value relatively. The performance of 5-valve engine was higher than that of 4-valve engine in high engine speed region.

• 드라이브 ㆍ 컨트롤
• /
• 제10권1호
• /
• pp.7-13
• /
• 2013

Port size 80mm or above large-flow type solenoid valves are extensively used in dust collector and power plants. These multi-stage solenoid valve have few problem. first, multi-solenoid valves are almost depend on imports and there are weak in the brine environment and the low energy efficiency. Because these problem, increased the necessity of research on the development of large flow and high pressure type solenoid valves. In this study, describe the design method of multi-stage solenoid test bench and confirm the influence valve performance on several parameter such as diaphragm orifice diameter. At first, each part has modeled by AMESim simulation tool and combining them. This AMESim virtual multi-stage solenoid valve found influence valve performance on the valve parameter. Finally developed the multi-stage solenoid valve and verified that performance on experimental result.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.30-35
• /
• 2019

EPPR (Electro-hydraulic Proportional Pressure Reducing) valves are pressure control valves. In this study, an independent metering valve (IMV), which is a combination of a spool valve opened and closed with the help of an EPPR valve, was discussed. The overall performance of the valve (IMV) was obtained by the respective modeling and simulation of the system. The valve investigated in this study is to be used for independent metering of hydraulic excavator actuator e.g. boom, arm, bucket etc. To design the model, continuity equations and force balance equations were used. The set of differential equations were then simulated in Simulink using ODE45 option in the configuration toolbox. The valve has to be able to control the flow rate going in and out of the cylinder separately, which is why the particular configuration was needed and selected.

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.70-77
• /
• 2011

우주발사체의 액체추진공급시스템에 사용되는 벤트/릴리프 밸브는 안전 밸브의 조합체로 극저온의 산화제를 주입할 때와 보관할 때 기화된 산소기체를 배출시킨다. 또한 비행 중에 추진제 탱크의 얼리지 압력을 안정적으로 유지하는 역할을 한다. 밸브의 동특성 및 유공압 작동특성을 알아보기 위해서 벤트/릴리프 밸브의 설계검증을 위해 AMESim을 이용해서 벤트/릴리프 밸브의 시뮬레이션 모델을 구성하였다. AMESim 밸브 모델을 검증하기 위해 밸브의 개폐 압력, 개폐작동시간을 수학적 계산 결과와 비교하였다. 또한 FLUENT 상용코드를 이용하여 내부유동 해석 결과를 반영하여 모델의 정확도를 높였다. 밸브 모델을 이용하여 설계인자에 대한 검증 및 작동성능을 분석하였다. 이 연구는 한국형 발사체에 사용되는 벤트/릴리프 밸브의 다양한 작동 요구조건에 대한 개발 효율성을 높일 수 있는 참고 가이드로 적용될 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.796-801
• /
• 2002

The goal of this research is the shape design of the valve using a computer simulation. For an analysis a basic mathematical model describing compression cycle is considered as consisting of five sets of coupled equations. These are the volume equation (kinematics), valve dynamic equation (dynamics), ideal gas equation (thermodynamics), Bernoulli equation (fluid dynamics), and dynamic equation of fluid particle based on Helmholtz equation (acoustics). Valve motion is made by the superposition of free vibration modes obtained by the finite element method. That is, the eigenvalues and eigenvectors are the sufficient modeling factors fur the valve in the simulation program. Thus, to design a shape of the valve, shape design sensitivity through chain-ruled derivatives is considered from two sensitivity coefficients, one is the design sensitivity of the capability of compressor with respect to the eigenvalues of the valve, and the other is the design sensitivity of the eigenvalue with respect to the shape change of the valve. In this research, the continuum design sensitivity analysis concepts are used for the latter.