• 동력기계공학회지
• /
• 제16권3호
• /
• pp.5-9
• /
• 2012

Novel mechanisms for Energy Recovery Devices are proposed to diminish the pressure loss in the high-pressure reverse-osmosis system. In the beginning, the state-of-the-art in the design of Energy Recovery Devices is reviewed and the features of each model are investigated. The direct-coupled axial piston pump(APP) and axial piston motor(APM) showed 39% energy recovery at operating pressure of reverse osmosis desalination systems, 60 bar. Meanwhile, the developed PM2D model, in which APM pistons are arranged parallel to those of APP, is more compact and showed higher efficiency in a preliminary test. Loss-reduction mechanisms employing rod piston and double raw valve port are additionally proposed to enhance the efficiency and durability of the device.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.51-60
• /
• 2020

This study addresses the modeling of a bi-directional outlet variable swash plate type axial piston pump with two EPPR valves and an analysis of the response characteristics to the angle control of that pump. In this paper, the combination of the EPPR valve and double rod type piston is referred to as the EPPR regulator. The EPPR regulator is compact and inexpensive, and has good responsiveness. Under actual pump operating conditions, because of the various external conditions of the pump, inertia is applied to the swash plate, generating the tilting torque. Also, the tilting torque can delay or shorten the response characteristics of the regulator. So we validated them through the analysis using SimulationX and these results allow users to freely integrate the EPPR regulator into the desired system.

• 에너지공학
• /
• 제14권3호
• /
• pp.173-179
• /
• 2005

소형고속엔진에서 연료분사 시스템은 기화기시스템 보다 출력, 연료소비율, 배기가스 등에서 향상된 결과를 가져온다. 최근에 국내에서 연료분사시스템은 차량에 사용되지만 이륜차에서는 사용되지는 않는다. 엔진에서 EFI(전자식연료분사)시스템은 변화하는 회전수에 따라 ECU 에서 정확한 연료를 공급할 수 있다. 본 연구의 목적은 이륜차에 사용되는 4valve SOHC 단기통 소형엔진에서 다양한 회전수에 맞는 엔진성능과 효율을 개선하기 위해 회전수별 연료분사효과를 고찰하였다.

• 소성∙가공
• /
• 제12권8호
• /
• pp.702-709
• /
• 2003

In the automotive industry hydroforming of sheet metal pairs have received special attention because materials for various sheet metal components of vehicles have changed into the high strength steel, aluminum, and titanium blank having low formability. Uniform deformation over the whole region is a main advantage in the sheet hydroforming process. Because upper and lower parts could be produced simultaneously with one tool, hydroforming of sheet metal pairs is competitive in reducing the lead-time and development cost. In this paper, the multi-stage hydroforming process of sheet pair is proposed in order to increase the formability of a structural part like the oil pan shape. The upper die for forming oil pan shape is divided into two parts which can move separately. By the finite element simulation, the design parameters such as geometry of the tool and detailed specification of hydraulic pump were calculated and verified. For the strict comparison of the proposed process, the blank holding force is kept to a constant value during deformation by hydraulic valve. The deformed shape and strain distribution of the manufactured parts with the proposed process are compared with the results of simulation. In the multi-stage hydroforming process, maximum thickness strain was improved by more than 30 percent.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.186-192
• /
• 2002

The fatigue crack propagation characteristics were investigated on dissimilar friction weld of two kind of heat-resisting steels (STR3 and STR35) commonly used in valve materials for vehicles. A small circular artificial defect was machined to induce fatigue crack at bonded line, heat affected zone and base metal of the weld on the surface of the specimens. From the results of the experiment, the fatigue limits of the materials STR3 and STR35 were obtained to be 429.0MPa and 409.4MPa respectably. The STR35 base metal and 1.0mm HAZ specimens showed 190% and 82% higher fatigue life than STR3 base metal. And the fatigue life of 1.0mm HAZ specimen was shown 99% on STR3 and 29% on STR35 higher than that of their base metal. But the fatigue life of weld interface specimen was shown 18% on STR3 and 72% on STR35 lower than that of their base metal because of the weld interface separation.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.92-99
• /
• 2008

This paper describes an signal processing method for the hall sensorless position control of ETC control system using a BLDC motor. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analog voltage output on the throttle valve instead of BLDC motor for detecting rotor position of motor. So the additional commutation information is necessarily needed to control the mentioned ETC module. In order to estimate and determine the commutation state, it is proposed to properly manipulate the resolution of A/D converter considering the mechanical parameter, that is, the number of motor slot and the ratio of reduction gear. Through this method, the estimation of commutation state for operating the system is possible and the discrete signal for commutation is stably obtained. The validity of the method is examined through the experimental results.

• 한국가스학회지
• /
• 제11권4호
• /
• pp.12-16
• /
• 2007

천연가스 자동차에 탑재되어 있는 연료압력 레귤레이터는 연료분사시스템의 압력을 일정하게 유지하는 역할을 한다. 연료압력의 정확한 제어는 천연가스 자동차가 가지고 있는 높은 효율성과 청정성을 십분 활용하기 위해서 반드시 필요한 사항이다. 본 연구에서는 천연가스 레귤레이터의 성능을 정확하게 평가할 수 있는 고압실험장치를 구축하였으며, 이 장치를 이용하여 두 가지 방식의 천연가스 레귤레이터를 평가하고 상호 비교를 하였다. 레귤레이터 밸브시스템의 설계에 따라 여러 가지 레귤레이터 성능 특성 중 동적응답과 Creep특성이 영향을 많이 받는 것으로 나타났으며, 레귤레이터 입구 압력이 높을 경우 출구 가스의 온도가 급격히 감소하는 것으로 나타남으로써 아이싱문제를 효과적으로 방지할 수 있는 방안이 마련되어야 함을 확인할 수 있었다.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.81-87
• /
• 2015

디젤 엔진에서 저압 배기재순환 시스템의 적용을 통한 질소산화물 저감과 연비 향상에 관한 효과를 확인하였다. 엔진의 정상 상태 및 과도 상태에서 시험이 진행되었으며, 차량상사를 통한 NEDC 모드 테스트를 위하여 별도의 제어로직도 개발되었다. 정상 상태의 시험결과에서 저압 배기재순환 시스템은 고압 배기재순환 시스템에 비하여 질소산화물 저감 및 연비 향상에 유리함을 확인하였고, NEDC 모드 테스트 결과로부터 배출가스의 증가없이 연비를 향상시킬 수 있는 것으로 나타났다.

• 한국재료학회지
• /
• 제16권11호
• /
• pp.698-704
• /
• 2006

In this study, the effect of chill layers occurred in shot sleeve on the molten metal filling was analyzed through computer simulation. The behavior of chill layers with temperature variation of shot sleeve set from 200 to $280^{\circ}C$ was also investigated. The simulation results showed the chill layers set in the in-gates during the injection process change the main filling direction and cause turbulent flow pattern, resulting in porosities inside the castings. The amount of chill layers with the increasing temperature of shot sleeve was considerably reduced. Particularly, at the setting temperature of $280^{\circ}C$ by heat control unit, the biggest reduction in chill layers, excellent trimmed surface and the highest density were achieved, suggesting that as the optimal sleeve condition in aluminum high pressure diecasting, especially for highly complex parts like valve body.

• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.14-21
• /
• 2014

The goal of this study drifter is to understand the operating mechanism of a drifter and to suggest a reliable analysis model which can be used for evaluating the drifter's performance from the viewpoint of impact frequency and energy. For this, the working principle of drifter and functions of its main components were analyzed, and a simulation model was developed based on the analysis. The model was validated using experimental tests on a test-bench. A comparative study of simulation and experimental results indicated that the suggested model accurately represents the real drifter system in terms of impact frequency and impact energy per blow.