• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.144-150
• /
• 2008

This research aims to develop parts for advanced fuel/oil filtering re-circulation applicable to this kind of regulation proof engines. These parts can playa role of converting traditional air emission type crankcase into recovery type crankcase so that the engine can deal with environmental regulations, which do not allow minimal amount of toxic gas discharge. For the experiment, test method and specially made testing equipment are prepared. The results showed that oil separation efficiency of the cone type CCV(Crank Case Ventilation) system was higher than one of cylinder type both in bench test and in engine.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.30-31
• /
• 2002

100 Gbit/in$^2$ 이상의 자기기록밀도를 달성하기 위해서는 재생헤드로 사용되고 있는 스핀밸브의 자기저항비가 10% 이상을 가지면서 열적 특성이 우수해야 한다. 현재까지 연구되어진 스핀밸브 구조 중 NiO([,2,3], $\alpha$-Fe$_2$O$_3$[4]등의 산화물 반강자성 층을 사용한 스핀밸브의 경우 기본 스핀밸브 구조를 사용하고도 이미 20% 이상의 자기저항비를 달성하였다. 이러한 높은 자기저항비는 절연층인 산화물 반강자성층과 금속 자성층 계면에서 일어나는 전자의 스펙큘라 반사(specular reflection)로부터 기인한다고 보고하고 있다.[2] (중략)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.687-688
• /
• 2006

DC솔레노이드 밸브의 성능을 나타내기 위해 여러 가지 중요한 파라메터들이 존재한다. 최소 혹은 최대 스트로크 시의 흡입력, 온도상승, 소비전력 그리고 동작시간 등이 있다. 본 논문에서는 동자시간을 최소화시키기 위해 반응표면법을 이용하여 DC솔레노이드 밸브의 형상 최적화를 수행하였고 그 결과를 유한요소법을 이용하여 검증한다.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.79-87
• /
• 2001

In this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of the engine exhaustive valve (SUH3-SUH35 dissimilar steels of 12.3mm, 16mm, 20mm, and 24mm in diameters) were performed, comparing with the other FRW matches of materials such as SUH3 to SUH31, STS303 and SUH3 to STS304. As an important result, the techniques for dissimilar friction welding optimization of engine heat resisting steels SUH3 and SUH35 (12.3mm, 16mm, 20mm, and 24mm) and its real-time weld quality evaluation by AE was developed, considering on both diameter and carbon equivalent effects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.154-155
• /
• 2007

Put Recently, development of micro valves that operate by compressed air has received significant attention in the fields of the micro fluid chip for medical applications or production lines of semi-conduct chip for electronic goods. Especially it is required that high-speed responsibility and lower power in optimal design of these micro valves. The primary objective of this study is to compare the optimally designed Solenoid Valve with the actually produced one which can highly improve the efficiency by providing optimal current according to mechanical load.

• Journal of Chest Surgery
• /
• 제44권3호
• /
• pp.220-224
• /
• 2011

Background: We investigated changes in the International Normalized Ratio (INR) and its measurement interval in patients with thromboembolic events who were treated by low intensity anticoagulation therapy after isolated mechanical aortic valve replacement. Materials and Methods: Seventy-seven patients who underwent surgery from June 1990 to September 2006 were enrolled in the study and observed until August 2008. The patients were followed up at 4~8 week intervals and their warfarin (Coumadin)$^{(R)}$ dosage was adjusted aiming for a target range of INR 1.5~2.5. The rate of thromboembolic events was obtained. Changes in the mean INR and INR measurement interval were comparatively analyzed between the normal group (event free group, N=52) who had no anticoagulation-related complications and the thromboembolic group (N=10). Hospital records were reviewed retrospectively. Results: The observation period was 666.75 patient-years. Thromboembolic events occurred in 10 patients. The linearized occurrence rate of thromboembolism was 1.50%/patient-years. Actuarial thromboembolism-free rates were $97.10{\pm}2.02%$ at 5 years, $84.30{\pm}5.22%$ at 10 years, and $67.44{\pm}12.14%$ at 15 years. The percentages of INR within the target range and mean INR were not statistically significantly different for the normal and thromboembolic groups. However, the mean INR during the segmented period just before the events showed a significantly lower level in the thromboembolic group (during a 4 month period: normal group, $1.86{\pm}0.14$ vs. thromboembolic group, $1.50{\pm}0.28$, p<0.001). The mean intervals of INR measurement during the whole observation period showed no significant differences between groups, but in the segmented period just before the events, the interval was significantly longer in thromboembolic group (during a 6 month period: normal group, $49.04{\pm}9.47$ days vs. thromboembolic group, $65.89{\pm}44.88$ days, p<0.01). Conclusion: To prevent the occurrence of thromboembolic events in patients who receive isolated aortic valve replacement and low intensity anticoagulation therapy, we suggest that it would be safe to maintain an INR level above 1.8 and to measure the INR at least every 7~8 weeks.

• Journal of Chest Surgery
• /
• 제45권5호
• /
• pp.295-300
• /
• 2012

Background: With growing attention to the aortopathy associated with aortic valve diseases, the number of candidates for accompanying ascending aorta and/or root replacement is increasing among the patients who require aortic valve replacement (AVR). However, such procedures have been considered more risky than AVR alone. This study aimed to compare the surgical outcome of isolated AVR and AVR combined with aortic procedures. Materials and Methods: A total of 86 patients who underwent elective AVR between 2004 and June 2010 were divided into two groups: complex AVR (n=50, AVR with ascending aorta replacement in 24 and the Bentall procedure in 26) and simple AVR (n=36). Preoperative characteristics, surgical data, intra- and postoperative allogenic blood transfusion requirement, the postoperative clinical course, and major complications were retrospectively reviewed and compared. Results: The preoperative mean logistic European System for Cardiac Operative Risk Evaluation (%) did not differ between the groups: $11.0{\pm}7.8%$ in the complex AVR group and $12.3{\pm}8.0%$ in the simple AVR group. Although complex AVR required longer cardiopulmonary bypass ($152.4{\pm}52.6$ minutes vs. $109.7{\pm}22.7$ minutes, p=0.001), the quantity of allogenic blood products did not differ ($13.4{\pm}14.7$ units vs. $13.9{\pm}11.2$ units). There was no mortality, mechanical circulatory support, stroke, or renal failure requiring hemodialysis/filtration. No difference was found in the incidence of bleeding (40% vs. 33.3%) which was defined as red blood cell transfusion ${\geq}5$ units, reoperation, or intentional delayed closure. The incidence of mediastinitis (2.0% vs. 0%), ventilator ${\geq}24$ hours (4.0% vs. 2.8%), atrial fibrillation (18.0% vs. 25.0%), mean intensive care unit stay (34.5 hours vs. 38.8 hours), and median hospital stay (8 days vs. 7 days) did not differ, either. Conclusion: AVR combined with additional aortic or root replacement showed an excellent outcome and recovery course equivalent to that after isolated AVR.

• Korean Journal of Radiology
• /
• 제23권11호
• /
• pp.1044-1054
• /
• 2022

Objective: This study aimed to investigate whether a deep learning reconstruction (DLR) method improves the image quality, stent evaluation, and visibility of the valve apparatus in coronary computed tomography angiography (CCTA) when compared with filtered back projection (FBP) and hybrid iterative reconstruction (IR) methods. Materials and Methods: CCTA images of 51 patients (mean age ± standard deviation [SD], 63.9 ± 9.8 years, 36 male) who underwent examination at a single institution were reconstructed using DLR, FBP, and hybrid IR methods and reviewed. CT attenuation, image noise, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), and stent evaluation, including 10%-90% edge rise slope (ERS) and 10%-90% edge rise distance (ERD), were measured. Quantitative data are summarized as the mean ± SD. The subjective visual scores (1 for worst -5 for best) of the images were obtained for the following: overall image quality, image noise, and appearance of stent, vessel, and aortic and tricuspid valve apparatus (annulus, leaflets, papillary muscles, and chordae tendineae). These parameters were compared between the DLR, FBP, and hybrid IR methods. Results: DLR provided higher Hounsfield unit (HU) values in the aorta and similar attenuation in the fat and muscle compared with FBP and hybrid IR. The image noise in HU was significantly lower in DLR (12.6 ± 2.2) than in hybrid IR (24.2 ± 3.0) and FBP (54.2 ± 9.5) (p < 0.001). The SNR and CNR were significantly higher in the DLR group than in the FBP and hybrid IR groups (p < 0.001). In the coronary stent, the mean value of ERS was significantly higher in DLR (1260.4 ± 242.5 HU/mm) than that of FBP (801.9 ± 170.7 HU/mm) and hybrid IR (641.9 ± 112.0 HU/mm). The mean value of ERD was measured as 0.8 ± 0.1 mm for DLR while it was 1.1 ± 0.2 mm for FBP and 1.1 ± 0.2 mm for hybrid IR. The subjective visual scores were higher in the DLR than in the images reconstructed with FBP and hybrid IR. Conclusion: DLR reconstruction provided better images than FBP and hybrid IR reconstruction.

• Korean Journal of Radiology
• /
• 제22권8호
• /
• pp.1266-1278
• /
• 2021

Objective: We aimed to compare the aortic valve area (AVA) calculated using fast high-resolution three-dimensional (3D) magnetic resonance (MR) image acquisition with that of the conventional two-dimensional (2D) cine MR technique. Materials and Methods: We included 139 consecutive patients (mean age ± standard deviation [SD], 68.5 ± 9.4 years) with aortic valvular stenosis (AS) and 21 asymptomatic controls (52.3 ± 14.2 years). High-resolution T2-prepared 3D steady-state free precession (SSFP) images (2.0 mm slice thickness, 10 contiguous slices) for 3D planimetry (3DP) were acquired with a single breath hold during mid-systole. 2D SSFP cine MR images (6.0 mm slice thickness) for 2D planimetry (2DP) were also obtained at three aortic valve levels. The calculations for the effective AVA based on the MR images were compared with the transthoracic echocardiographic (TTE) measurements using the continuity equation. Results: The mean AVA ± SD derived by 3DP, 2DP, and TTE in the AS group were 0.81 ± 0.26 cm², 0.82 ± 0.34 cm², and 0.80 ± 0.26 cm², respectively (p = 0.366). The intra-observer agreement was higher for 3DP than 2DP in one observer: intraclass correlation coefficient (ICC) of 0.95 (95% confidence interval [CI], 0.94-0.97) and 0.87 (95% CI, 0.82-0.91), respectively, for observer 1 and 0.97 (95% CI, 0.96-0.98) and 0.98 (95% CI, 0.97-0.99), respectively, for observer 2. Inter-observer agreement was similar between 3DP and 2DP, with the ICC of 0.92 (95% CI, 0.89-0.94) and 0.91 (95% CI, 0.88-0.93), respectively. 3DP-derived AVA showed a slightly higher agreement with AVA measured by TTE than the 2DP-derived AVA, with the ICC of 0.87 (95% CI, 0.82-0.91) vs. 0.85 (95% CI, 0.79-0.89). Conclusion: High-resolution 3D MR image acquisition, with single-breath-hold SSFP sequences, gave AVA measurement with low observer variability that correlated highly with those obtained by TTE.

• Investigative Magnetic Resonance Imaging
• /
• 제12권1호
• /
• pp.40-48
• /
• 2008

목적: 개정 도씨 술식과 승모판 고리성형을 동시에 시행한 후 심실의 형태와 기능의 초기 변화를 자기공명영상을 이용하여 평가하고자 하였다. 대상 및 방법: 총 21명의 확장성 심부전 환자를 대상으로 하여 8명에서 개정 도씨 술식을, 6명에서 승모판 고리성형을, 7명에서 두 수술을 동시에 시행하였다. 영화 자기공명영상을 이용하여 수술 전과 후에 좌심실의 형태와 기능을 평가하였다. 좌심실의 이완기말 용적과 수축기말 용적, 장축과 단축의 길이를 측정하고 이로부터 좌심실의 일회박출량, 박출률, 구형지수를 계산하여 구하였다. 이렇게 구해진 인자들을 분석하고 술식이 서로 다른 3군에서 어떻게 다른지 비교하고 두 수술을 동시에 시행할 때의 효과를 해석하였다. 결과: 자기공명영상은 수술 전 $12\;{\pm}\;15$ 일 (범위 1-58 일)과 수술 후 $38\;{\pm}\;50$ 일 (범위 7- 231 일)에 시행하였다. 두 수술을 동시에 시행한 군에서 다른 군에 비하여 수술 전 좌심실의 확장이 더 심하였고 수축력이 더 감소되어 있었다. 수술 후, 좌심실의 이완기말 용적과 수축기말 용적은 수술 형태와 관계없이 모든 환자에서 유의하게 감소하였다. 박출률은 개정 도씨 술식을 받은 환자 군에서만 유의하게 증가하였다 (25.4% to 40.7%). 구형지수는 개정 도씨 술식을 받은 환자에서는 증가하였고 승모판 고리성형을 받은 환자에서는 감소하였다 (0.65 to 0.78 vs. 0.75 to 0.65). 두 수술을 동시에 시행한 환자에서는 유의한 구형지수의 변화가 없었다. 결론: 개정 도씨 술식과 승모판 고리성형을 동시에 시행받은 확장성 심부전 환자에서 좌심실의 형태와 기능의 초기 변화는 좌심실 용적과 일회박출량의 현저한 저하이다. 승모판 고리성형에 의한 구형지수의 감소는 개정 도씨술식에 의한 구형지수의 증가에 의해 상쇄되어 좌심실의 형태는 변하지 않는다. 두 수술을 동시에 시행한 후 좌심실 박출률의 향상은 조기에 일어나지 않는다.