• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.339-348
• /
• 2007

In this work, we compared the characteristics of three benthic biotic indices (BPI, AMBI, BIBI) which indicates the health condition of benthic communities in Masan Bay, Korea where anthropogenic impacts have been concentrated. Also we evaluated the usefulness of these benthic indices and some problems if they were applied to the Korean coastal waters. For this we used the macrozoobenthos data collected using van Veen grab ($0.1\;m^2$) at 21 sites in Masan Bay in February and August 2004. Based on the BPI values, two stations in the inner bay were found in a very hard polluted condition and three stations in the middle bay were also in a highly polluted condition. Only one station located in the bay mouth was in a normal condition. The inner bay stations showed very high AMBI values (${\geq}5.0$), indicating a highly polluted condition. The bay mouth station was assessed in a moderately polluted condition. The overall BIBI values in Masan Bay were in the range between 1.0 and 3.0. The inner bay stations showed low BIBI values (${\leq}2.0$) in the severely degraded condition. The bay mouth station with high BIBI value over 3.0 was assessed as a normal condition. All three benthos indices showed that macrozoobenthic communities in the inner bay were in a seriously polluted condition all year round, and macrobenthic faunas in the bay mouth seemed in a bad healthy condition (slightly polluted) based on AMBI during summer season. These three benthic biotic indices showed the similar assessment result, and thus we consider that each of them is a useful tool for the assessment of coastal benthic ecosystems under the organic enrichment in sediment.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.850-855
• /
• 2005

Model was developed to predict the growth of Listeria monocytogenes in raw pork. Experiment condition for model development was full 5-by-7 factorial arrangements of temperature (0, 5, 10, 15, and $20^{\circ}C$) and time (0, 1, 2, 3, 18, 48, and 120 hr). Gompertz values A, C, B, and M, and growth kinetics, exponential growth rate (EGR), generation time (GT), lag phase duration (LPD), and maximum population density (MPD) were calculated based on growth increased data. GT and LPD values gradually decreased, whereas EGR value gradually increased with increasing temperature. Response surface analysis (RSA) was carried out using Gompertz B and M values, to formulate equation with temperature being main control factor. This equation was applied to Gompertz equation. Experimental and predictive values for GT, LPD, and EGR, compared using the model, showed no significant differences (p<0.01). Proposed model could be used to predict growth of microorganisms for exposure assessment of MRA, thereby allowing more informed decision-making on potential regulatory actions of microorganisms in raw pork.

• Smart Structures and Systems
• /
• v.29 no.3
• /
• pp.475-484
• /
• 2022

The loss of cable tension for civil infrastructure reduces structural bearing capacity and causes harmful deformation of structures. Currently, most of the structural health monitoring (SHM) approaches for cables rely on contact transducers. This paper proposes a cable tension identification technology using percussion sound, which provides a fast determination of steel cable tension without physical contact between cables and sensors. Notably, inspired by the concept of tensioning strings for piano tuning, this proposed technology predicts cable tension value by deep learning assisted classification of "percussion" sound from tapping a steel cable. To simulate the non-linear mapping of human ears to sound and to better quantify the minor changes in the high-frequency bands of the sound spectrum generated by percussions, Mel-frequency cepstral coefficients (MFCCs) were extracted as acoustic features to train the deep learning network. A convolutional neural network (CNN) with four convolutional layers and two global pooling layers was employed to identify the cable tension in a certain designed range. Moreover, theoretical and finite element methods (FEM) were conducted to prove the feasibility of the proposed technology. Finally, the identification performance of the proposed technology was experimentally investigated. Overall, results show that the proposed percussion-based technology has great potentials for estimating cable tension for in-situ structural safety assessment.

• Journal of Environmental Health Sciences
• /
• v.45 no.2
• /
• pp.192-202
• /
• 2019

Objectives: According to the central limit theorem, the samples in population might be considered to follow normal distribution if a large number of samples are available. Once we assume that toxicity dataset follow normal distribution, we can treat and process data statistically to calculate genus or species mean value with standard deviation. However, little is known and only limited studies are conducted to investigate whether toxicity dataset follows normal distribution or not. Therefore, the purpose of study is to evaluate the generally accepted normality hypothesis of aquatic toxicity dataset Methods: We selected the 8 chemicals, which consist of 4 organic and 4 inorganic chemical compounds considering data availability for the development of species sensitivity distribution. Toxicity data were collected at the US EPA ECOTOX Knowledgebase by simple search with target chemicals. Toxicity data were re-arranged to a proper format based on the endpoint and test duration, where we conducted normality test according to the Shapiro-Wilk test. Also we investigated the degree of normality by simple log transformation of toxicity data Results: Despite of the central limit theorem, only one large dataset (n>25) follow normal distribution out of 25 large dataset. By log transforming, more 7 large dataset show normality. As a result of normality test on small dataset (n<25), log transformation of toxicity value generally increases normality. Both organic and inorganic chemicals show normality growth for 26 species and 30 species, respectively. Those 56 species shows normality growth by log transformation in the taxonomic groups such as amphibian (1), crustacean (21), fish (22), insect (5), rotifer (2), and worm (5). In contrast, mollusca shows normality decrease at 1 species out of 23 that originally show normality. Conclusions: The normality of large toxicity dataset was not always satisfactory to the central limit theorem. Normality of those data could be improved through log transformation. Therefore, care should be taken when using toxicity data to induce, for example, mean value for risk assessment.

• Ocean and Polar Research
• /
• v.32 no.2
• /
• pp.137-144
• /
• 2010

There is a host of habitat assessment systems available to evaluate and grade tidal flat ecosystems in Korea. Nevertheless, we recognize the need to develop a better ecological scheme to improve reliability and accuracy given the importance of using an empirical approach in assigning grades to indicators and the limitation of current systems which evaluate tidal flats on a regional basis. A preferable system would be one that enables habitat mapping within a tidal flat, provides a diagnosis of ecological stress/health, has a high level of ecological relevance, communicability, and statistical robustness, and enables evaluation of diverse habitats within a tidal flat. The following points should be considered in framing such a system. Indicators should discriminate habitat quality into five to seven grades accomodating diverse characteristics and conservation value of a habitat, and the grading should be made from frequency distribution of indicators based on nationwide data.We suggest the following tasks in crafting such a system: i) The decision on selection of indicators should be made based on accuracy of assessment and practical application; ii) effects of physical habitat conditions on variability of indicators should be reflected; and, iii) further works on stress/health indicators should be addressed for adopting a multiple-indicator approach which reduces misdiagnosis.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.261-268
• /
• 2014

In advanced countries, a variety of consumer exposure assessment models including CONSEXPO, are developed to manage risks of consumer products containing hazardous materials. The models are used to assess the risks of exposure to hazardous chemicals in consumer products, which serves as a foundation for regulation standards. In this study, exposure assessment models applicable for various scenarios were reviewed and a proper model was applied for the selected products and risk assessment was conducted at each stage to establish a risk assessment procedure for different types of products. Based on the exposure scenario, exposure factor was selected and according to the algorithm produced based on CONSEXPO exposure model, some level of phthalates were detected from some types of PVC flooring. However, a correlation between phthalate content and migration rate showed r-square 0.0065, little correlation, which is inadequate for estimating standard value. For this reason, it seems valid that the current standard be in place. Additionally, any new standard was not suggested as VOCs were not found harmful to human health, allowing the existing standard to be continuously applied. No migration rate was found for heavy metals and risk assessment was not performed accordingly. In this aspect, it is presumed that hazards to health through dermal exposure would be very little.

• Journal of Environmental Health Sciences
• /
• v.48 no.1
• /
• pp.44-51
• /
• 2022

Background: Air pollution is increasing together with industrialization and urbanization. In order to reduce air pollution, public transportation is recommended rather than private cars, and the number of passengers using public transportation is increasing accordingly. This study observes the concentration of indoor pollutants in city buses over time. Through this means, we intend to suggest a plan to manage the indoor air quality in city buses. Objectives: The concentration of indoor pollution in public transportation was investigated from April 2021 to January 2022. Based on this, we evaluated the exposure to indoor pollutants. Methods: Six city bus lines in an industrial city were selected for the research, and indoor pollution was measured through IoT (Internet of Things)-based sensor-type measuring devices. The concentration of pollutants was measured every minute, and statistical data were constructed based on the measurement results. Results: In all the city buses studied, the average concentration of pollutants were below the guidelines. However, some measurement results showed cases of exceeding the guidelines. As a result of the analysis by time zone, there were more cases in which pollutants exceeded the standard value during rush hour compared to at other times. A risk assessment for PM₁₀ was performed by evaluating the excess mortality risk from exposure and the risk from inhalation exposure. Conclusions: All measured indoor pollutants in the city buses did not exceed the guidelines. Also, the risk assessment results were found to be within the level of safety. However, if a city bus is used for a long time, there is a possibility that there may be an impact on the human body due to inhalation exposure, so additional management is required.

• Journal of Technologic Dentistry
• /
• v.38 no.2
• /
• pp.57-62
• /
• 2016

Purpose: The purpose of this study was to assess precision of crown prostheses that were fabricated by using 2 kinds of bur or 3 kinds of bur. Methods: The crowns were fabricated by using the first molar of the right maxillary in this study. The abutments that were prepared were scanned by using a scanner and designed by using CAD software. Based on the crown design, NC data were created with CAM software. The created NC data were used while fabricating the crown prostheses by using 5-axis milling machine. Scanning was done for the internal and external surface of the completed crown prostheses and 3-dimensional measurement was conducted for precision assessment. Results: The $RMS{\pm}SD$ value for the external surface of the crown prostheses that was fabricated by using two burs and three burs were $28.5{\pm}4.1{\mu}m$ and $19.1{\pm}2.8{\mu}m$, respectively; and the value for two burs were bigger than that for three burs with statistical significance (p<0.001). The $RMS{\pm}SD$ value for the internal surface of the crown prostheses that was fabricated by using two burs and three burs were $14.9{\pm}1.9{\mu}m$ and $13.3{\pm}2.5{\mu}m$, respectively; and the value for two burs were bigger than that for three burs but with no statistical significance. Conclusion: Based on this study, the prostheses that were fabricated by using 3 bur presented better stability compared to those that were fabricated by using 2 bur and statistically significant difference was found only in the external surface.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.209-218
• /
• 2010

There experiment were carried out to analyze for pesticide residues in 4 kinds of dried fruits collected in northern area of Seoul in 2007~2009. Total of 213 samples were analyzed. According to the results, 20 kinds of residual pesticides were detected. Residual pesticides were detected in 66 samples (31.0%) and 8 samples (3.8%) exceeded maximum residue limits (MRL). Cypermethrin, fenvalerate, endosulfan, chlorpyrifos, bifenthrin were detected frequently. The Pesticide types which were detected in dried furits were revealed in order of pyrethroid > organophosphate > organochloride > dicarboximide. Detection rates of dried fruits were dried chinese matrimony vein (53.0%), dried jujube (34.9%), dried rubi fructus (7.6%) and dried maximowiczia chinensis (4.6%). Based on these results, we investigated the risk assessment from amount of residual pesticide in dried jujube. Range of %ADI were 0.0001~0.0081%, but the value has not effected on human health.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.