• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.373-376
• /
• 2018

기존의 파프리카 스마트팜 시스템의 경우 여러 센서 값을 기준 값에 추종하도록 설정 되어 있기 때문에 다른 외란의 값이 들어오면 시스템이 최적의 판단을 하지 못하는 경우가 많아 파프리카 생장에 유해한 경우가 발생한다. 이를 의사결정 나무 기법을 활용하여 파프리카 스마트팜용 전문가 시스템을 설계하여 주변 환경에 따라 달라지는 요소들에 의해 생성되는 데이터를 사용하여 농민의 경험치와 유사한 의사결정 구조를 가진 제어 알고리즘을 구축한다. 현재의 스마트팜 제어시스템의 경우 농민이 설정해둔 기준 값에 센서 값들을 추종하도록 시스템화 되어 있기 때문에 주변 환경의 외란에 대한 사용자의 개입이 필수적이다. 파프리카 스마트팜 장비를 제어하기 전 여러 환경 요소 중 가장 영향력을 미치는 것을 선정한 후 농민들의 경험치와 표준 의사결정 기준이 반영된 복합 환경제어를 위한 전문가 시스템을 모델링하였다. 설계된 모델은 내외부 환경 데이터에 의해 학습된 의사결정트리 기반의 파프리카용 전문가시스템으로 서, 사용자의 간섭을 최소화한 제어기를 설계할 수 있도록 지원한다. 이번 연구를 통해 여러 데이터를 복합 시키면서 각 환경 요소들이 상호관계를 갖고 있으며, 나아가 여러 주변 환경 요소들이 생장에 영향을 미치고 있기에 전문가용 파프리카 스마트팜을 만들 때 표준이 될 수 있는 제어 알고리즘이 될 것으로 기대한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1168-1176
• /
• 2010

Currently drilling investigation and the SPT in parallel not only organization and peculation sincerity quality historian of test to be old the data was abundant with the site ground investigation test which is representative and the research of empirical formula in compliance with many scholar was accomplished and was come. The data which is like this wide is used with geotechnical engineering data of plan and space-time of the field which is various. SPT with tentative voluntary skillful degree record method of variety and technical expert of equipment, according to site conditional is consistent the quality of ground condition but cannot be made to show there is a tendency and specially the point whose is difficult actually accurately to follow the interval which decides in quality as a matter of tentative standard of drill and the test in parallel and a tentative method exists. From the research which sees consequently also the skill of variety and technical expert of equipment of SPT, strong point of the SPT automation logger will be able to complement the problem point of quality etc. of site condition under comparison analyzing should have been boiled about SPT of existing and tentative methods and N-value.

• Journal of Korea Trade
• /
• 제24권3호
• /
• pp.20-36
• /
• 2020

Purpose - As the global product network expands through both internationalization and diversification of the multimodal transportation system, corporate strategies have shifted to emphasize the importance of a high value-added international logistics system. To guide policies and strategies to attract relevant industries, this study aims to analyze the location competitiveness of regional logistics distribution center to serve Northeast Asia. Design/methodology - Multi-criteria techniques are considered to offer a promising framework for evaluating decision-making factors. This paper employed an analytic hierarchy process to analyze the hierarchal structure of determinants for selecting the location of a regional logistics distribution center. Adopting both qualitative and quantitative evaluations, this study suggest political implications for a regional logistics distribution center development, such as the direction of political support, service differentiation and infrastructure development. Findings - This study developed a location competitiveness evaluation model, based on the case study of the major port-cities in Northeast Asia. Evaluation model incorporates five factors underpinning 17 components extracted using factor analysis. The results revealed that the logistics factor is the most significant factor for evaluating the competitiveness of a regional logistics distribution center. The remaining factors were market, costs, and services environment. Comparing qualitative and quantitative evaluations, results provide useful insights for a regional logistics distribution center development in Northeast Asia. Originality/value - This study revealed differences between qualitative and quantitative evaluations. The finding implies that prior works on evaluation models of competitiveness has not successfully measured the gap between quantitative data and expert' evaluations. To overcome this limitation, this paper considered both actual data such as actual distance, cost, the number of companies located, and expert opinions.

• 한국안전학회지
• /
• 제36권2호
• /
• pp.49-57
• /
• 2021

In the case of military supplies, any potential failure and causes of failures must be considered. This study is aimed at examining the failure modes of a rotorcraft landing system to identify the priority items. Failure mode and effects analysis (FMEA) is applied to the rotorcraft landing system. In general, the FMEA is used to evaluate the reliability in engineering fields. Three elements, specifically, the severity, occurrence, and detectability are used to evaluate the failure modes. The risk priority number (RPN) can be obtained by multiplying the scores or the risk levels pertaining to severity, occurrence, and detectability. In this study, different weights of the three elements are considered for the RPN assessment to implement the FMEA. Furthermore, the FMEA is implemented using a fuzzy rule base, similarity aggregation model (SAM), and grey theory model (GTM) to perform a comparative analysis. The same input data are used for all models to enable a fair comparison. The FMEA is applied to military supplies by considering methodological issues. In general, the fuzzy theory is based on a hypothesis regarding the likelihood of the conversion of the crisp value to the fuzzy input. Fuzzy FMEA is the basic method to obtain the fuzzy RPN. The three elements of the FMEA are used as five linguistic terms. The membership functions as triangular fuzzy sets are the simplest models defined by the three elements. In addition, a fuzzy set is described using a membership function mapping the elements to the intervals 0 and 1. The fuzzy rule base is designed to identify the failure modes according to the expert knowledge. The IF-THEN criterion of the fuzzy rule base is formulated to convert a fuzzy input into a fuzzy output. The total number of rules is 125 in the fuzzy rule base. The SAM expresses the judgment corresponding to the individual experiences of the experts performing FMEA as weights. Implementing the SAM is of significance when operating fuzzy sets regarding the expert opinion and can confirm the concurrence of expert opinion. The GTM can perform defuzzification to obtain a crisp value from a fuzzy membership function and determine the priorities by considering the degree of relation and the form of a matrix and weights for the severity, occurrence, and detectability. The proposed models prioritize the failure modes of the rotorcraft landing system. The conventional FMEA and fuzzy rule base can set the same priorities. SAM and GTM can set different priorities with objectivity through weight setting.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1073-1075
• /
• 1998

This paper presents the method of parameter estimation of diffusion model for monitoring Demand-Side Management Program. Bass diffusion model was applied in this paper, which has different values according to parameters ; coefficients of innovation, imitation and potential adopters. Though it is very important to estimate three parameter, there are no empirical results in practice. Thus, this paper presents the method of parameter estimation in case of few data with constraints to reduce the possibility of bad estimation. The constraints are empirical results or expert's decision. Case studies show the diffusion curves of high-efficient lighting and also forecasting of the peak value for power demand considering diffusion of high-efficient lighting, the feedback and least-square parameter estimation method used in this paper enable us to evaluate the status and forecasting of the effect of DSM program.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.296-301
• /
• 1998

The Rough Set theory suggested by Pawlak in 1982 has been useful in AI, machine learning, knowledge acquisition, knowledge discovery from databases, expert system, inductive reasoning. etc. The main advantages of rough set are that it does not need any preliminary or additional information about data and reduce the superfluous informations. but it is a significant disadvantage in the real application that the inference result form is not the real control value but the divided disjoint interval attribute. In order to overcome this difficulty, we will propose approach in which Rough set theory and Neuro-fuzzy fusion are combined to obtain the optimal rule base from lots of input/output datum. These results are applied to the rule construction for infering the temperatures of refrigerator's specified points.

• 대한산업공학회지
• /
• 제32권4호
• /
• pp.279-290
• /
• 2006

This paper proposes a model to assess the maturity level of Six Sigma activities. We classify the maturity level into 5 stages: initial, forming, storming, performing and mature stage. To evaluate the maturity level, 10 categories of Six Sigma with 3 factors each are identified: management leadership, belt system, expert training, establishing execution system, compensation, organization, corporate culture, customer focus, project selection, and management of project results. Scoring 277 items in total, the value of each factor is evaluated by weighted average of those items. Maturity level is appraised by rating the sum of scores of 10 categories that are obtained by summing up the values of its 3 factors. Values of weights and criteria of rating maturity levels are determined by analyzing 90 companies and Six Sigma exper's opinion. This study also shows the actual appraisal results of some companies.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.604-607
• /
• 2002

In this study, we will try to develop the 3D automatic design program of limit gauge. When users, who have some mechanical information, input some date, they can do 3D-modeling easily like expert. This is one of the merit in automatic design program and the automatic design program can compare the limit gauge made in this study with processed the bolt and nut model. This demonstrates the effective value of automatic design model. Limits gauge of sort divide into ring gauge of measuring bolt and pin gauge of measuring nut. The new automatic design program follows the KS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.595-599
• /
• 2002

In this study, we try to develop the 3D automatic design program of screw thread limit gauge. When users, who have some mechanical information, input some date, they can do 3D-modeling easily like expert. This is one of the merit in automatic design program and the automatic design program can compare screw thread limit gauge made in this study with processed the bolt and nut model. This demonstrates the effective value of automatic design model. Screw thread limit gauge of sort divide into ring gauge of measuring bolt and pin gauge of measuring nut. The new created automatic design program follows the KS.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.40-48
• /
• 2016

The engineering knowledge and technology is core driving forces of continuous growth in knowledge based society. Companies, the government, and universities are the subjects of an innovation and the cooperation between them is very important. Nowadays, the main purpose of industry-university cooperation moves to train experts and develop a new product. A shift of the paradigm came from the change of recognition that the final consumers of the program are companies and the universities are supporters of the program. In this paper, we investigate the purpose, participation and satisfaction of companies to industry-academy technology cooperation through empirical studies. The need to expert training, product development and process development makes companies participate industry-academy technology cooperation and companies have different purpose of participation by the business type. Companies often feel that expert training, subsidiary purpose of industry-academy technology cooperation, is more important than product development or process development. This result is caused by the real world environment of small and mid-size companies, lacking of technology experts. The participation of companies to each technology cooperation program (technology transfer, joint technology development, consigned technology development, technology consulting, co-op. lab.) is also different by business type. The companies' satisfaction with the purpose of process development is relatively higher than that with the purpose of product development and companies show also different satisfaction value by business type and participating program. The results of this study can give a contribution to the design of demand oriented industry-academy technology cooperation model.