• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.276-283
• /
• 2018

For the first time, polyvinyl chloride (PVC) was used as an easily-handled chlorine source for preparation of isotropic pitch-based carbon fiber (IPCF) incorporating ethylene bottom oil (EO) as a raw material. Pitch precursors were prepared by the chlorination-dehydrochlorination triggered by chlorine radicals originated from PVC; aromatization and poly-condensation reactions occurred by polyene-type radicals from PVC. Radical production and co-carbonization were facilitated by pretreatments of EO through vacuum distillation, bromination, and additional heat treatment. Pitches were prepared by the co-carbonization of pretreated EO and EO containing 20 wt% PVC, and had higher yields and better spinnability than those by simple distillation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.743-752
• /
• 2013

The objective of this study was to investigate the quality characteristics of spirits derived from fruit using copper distillation equipment. First, optimal yeast strains were chosen through a fermentation test on raw materials (apples, mandarins and rowanberries). The normal fermentation condition for rowanberries observed at a rowanberry concentration of 8% during mashing included chaptalization with sugar to increase the alcohol content. During the mashing, fruits were fermented and distilled through one of three different types of distillation apparatuses (pot distiller, vacuum distiller, or multistage distiller made of copper). The results revealed that the type of apparatus used affects the content of alcohol and flavor components. The distilled spirits prepared through a copper multistage distiller had a much higher tendency to retain components of fruit aromas such as ethyl acetate and provided higher yields than spirits prepared with a pot distiller or vacuum distiller. Thus, the copper multistage distiller apparatus can be applied to positively influence the taste and flavor of fruit distilled spirits by enhancing fruit aromas, removing impurities such as sulfur components and enhancing yields.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.76-80
• /
• 1991

To isolate oryzanol from the by-product of rice bran oil refinning, experiment of solvent fractional crystallization was carried out at various conditions with the dark oil obtained by acidifying the soap stock of micella refinning process and the pitch obtained from vacuum distillation of the dark oil. The impurity interfering the crystallization process such as waxes can be removed as precipitates by cooling the 1:1 mixtrue of acetone and dark oil to $0^{\circ}C$, From the dewaxed dark oil, oryzanol concentrate with 51.3% purity was obtained by fractional crystallization at$0^{\circ}C$ with the mixture of 8 part volume of hexane and 1 part of the dewaxed dark oil. The concentrate was recrystallized at room temperature with 20 part volume of methanol to yield oryzanol crystal of 98.3% purity. The optimum condition of vacuum distillation was temperature of $180^{\circ}C\;at\;0.2{\sim}0.4\;torr$ with 2% steam sparging. At this condition, the free fatty acid in the dark oil was removed as distillate without thermal deomposition to yield 82.3% of oryzanol as the pitch of 27.3% purity. After concentration from the pitch with 20 part volume of hexane to yield yellow powder of 75.4% purity, the yellow powder was recrystallized in methanol at room temperature to obtain the crystal containing 99.0% oryzanol. The overall oryzanol yield from the dark oil and the pitch was 9.5 and 28.5%, respectively. The change of the composition of sterols and triterpenoid alcohols in the compounds isolated during fractionation was analyzed by GC-MS.

• Clean Technology
• /
• v.29 no.4
• /
• pp.262-271
• /
• 2023

Globally, the amount of waste plastics has been occurring to environmental problems. As a result, it is necessary to research methods that utilize waste plastic pyrolysis oil (WPPO) produced by pyrolysis. One such method being studied is utilizing WPPO as a naphtha feedstock. In this study, five types of WPPO were analyzed to determine whether they can be used as raw materials for naphtha. Because of their wide boiling point range, the WPPOs were fractionated into light and heavy fractions through vacuum distillation, and the separation and purification techniques were analyzed using GC-VUV to determine the content of paraffin, olefin, and other compounds. All WPPOs showed high olefin content regardless of the source and fraction. Aromatic and paraffin content varied depending on the source, and oxygen and other compounds also varied significantly by source and fraction. In addition, the light fraction showed a carbon distribution similar to that of naphtha, whereas the heavy fraction showed a carbon distribution of C₁₁ ~ C₁₄. In conclusion, additional processes and raw material selection are required to utilize waste plastic pyrolysis oil as a raw material for naphtha.

• Tribology and Lubricants
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1985

Processes such as vacuum distillation, mixed solvent extraction, neutralization and clay treatment were used to refine an electrical insulating oil, The improved reused oil showed an excellent copper corrosion resistance and gave a better oder than that of oil refined from the conventional acid treatment method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.420-426
• /
• 1995

Volatile compounds in raw oyster and oyster hydrolysate produced with protease were compared by vacuum simultaneous steam distillation-solvent extraction/gas chromatography/mass spectrometry. Sixty-two volatile compounds were detected in both samples. Of these, 57 were positively identified, composed mainly of aldehydes(12), ketones(9), alcohols(14), nitrogen-containing compounds(9), acids(6), terpenes(4), and miscellneous compounds(8). Levels of acids decreased after hydrolysis, whereas several other compounds such as aldehydes, ketones, and nitrogen containing compounds increased. Pyrazines, found in high abundance, were only detected in oyster hydrolysate.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.238-242
• /
• 2015

A steam jet vacuum system that will be implemented in a multi-effect desalination plant is numerically investigated. The objective of this study is to numerically investigate the performance characteristic of the steam jet vacuum system for the sea water distillation process. The effects of design parameter such as nozzle size and converging duct angle are discussed in order to get a better understanding of flow characteristics inside the steam ejector and subsequently pave the way for more optimum designs. The simulation results have been in good agreement with experimental data and have well reproduced the shock train phenomena of the throat region.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.25-31
• /
• 1984

The volatile aroma components were isolated from Korean flue-cured tobacco (N.C. 2326) by using a vacuum steam distillation method. Individual aroma components were identified by GCIMS and comparison of gas chromatowaphic retention time with those of the authentic samples. Sensory analysis showed that a vacuum steam-distilled product of Flue-cured tobacco had a typical haylike, floral and fruity aroma. Among 62 compounds identified, major compounds included neophytadiene, benzyl alcohol, ethyl acetate, phenyl ethyl alcohol, ethyl alcohol, ethyl formate, acetic acid, solanone, 2-acetyl pyrrole, $\beta$-ionone epoxide, 2, 4-heptadienal (2 isomers), megastigmatrienone (4 isomers), furfural and total amounts of 13 compounds were about 80%.

• Korean Journal of Metals and Materials
• /
• v.48 no.3
• /
• pp.241-247
• /
• 2010

In order to develop the vacuum distillation process of magnesium alloy scrap, a fundamental study on the evaporation behavior of magnesium alloy (AM50) scrap melt was carried out. Melt temperature, pressure, reaction time, and initial specific surface area of melt were considered as experimental variables. The evaporation rate of magnesium increased with the increase of melt temperature and initial specific surface area of melt, and with the decrease of the pressure. The activation energy of magnesium evaporation reaction calculated by an Arrhenius plot decreased with the decrease of the pressure and with the increase of the initial specific surface area of melt. An empirical equation was derived for the evaporation rate of magnesium from AM50 alloy melt.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.