• 한국식품과학회지
• /
• 제22권2호
• /
• pp.150-154
• /
• 1990

취반과 살균을 단일화하는 레토르트 쌀밥 제조방법개발을 위해 원료쌀과 밥짓는 물을 소정량 함께 충전 밀봉한 후 살균온도$(110^{\circ}C,\;120^{\circ}C,\;130^{\circ}C)$ 및 포장재내 공기량(함기 ; 31ml, 반진공, 13ml, 진공; -0.7ml)을 달리하여 시험하였다. 수분 15.8%인 원료 쌀과 물의 비율을 1:1.1로 하여 레토르트 살균한 경우 쌀밥의 수분은 59.0-63.3%이었다. 내용 쌀밥의 층별 수분분포가 가장 균일한 조건은 $130^{\circ}C$ 진공포장이었고, 가열온도가 낮고 함기량이 많을수록 층별 차이는 컸다. 퍼짐도는 일반취반밥에 비하여 켰으며, 층별로는 상층이 낮았고 하층이 컸으며. 파우치내 잔존공기량이 많을수록 퍼짐도가 적었다. 층간의 차이는 가열온도가 높고 잔존공기량이 적을수록 적었다. ${\alpha}$화도는 포장방법에는 영향을 거의 받지 않았으나 살균온도가 높을수록 ${\alpha}$화도가 증가하였다. 색택은 가열온도가 높고 잔존 공기량이 적을수록 백색도가 높았으며, 가장 우수한 것은 $130^{\circ}C$ 진공포장 제품이었다. 밥알의 온전도는 함기포장인 것이 진공포장보다 월등히 높았다. 기호도는 진공포장의 경우가 색택과 퍼짐성에 있어서는 좋은 평가를 받았으나 외관에서는 밥알이 대부분 찌그러지고 떡모양이 되어 좋지 않았다. 함기포장의 정우는 색택에서 다소 불량하나 온전밥알의 유지상태가 좋아 조직감에서 좋은 평가를 받았다. 기호도 검사에서 가장 좋은 평가를 받은 것은 $130^{\circ}C$ 반진공 제품이었다.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.217-223
• /
• 2023

In this study, we compared the VacCAD and VacTran, commercial vacuum simulators, to investigate the simulation applicability and efficiency as vacuum simulation software. It was verified on reliability and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and employed vacuum materials. First, usability of simulation schematics was estimated through the modeling tools and the overall simulation characteristics of each simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping performance characteristics of commercial high vacuum system models. In addition, the degree of tolerances on both simulators was also evaluated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacTran has been presented, and it was also expected that the utilization of VacTan in vacuum applications to be increased due to the higher availability of modelling variations.

• Elastomers and Composites
• /
• 제7권1호
• /
• pp.53-58
• /
• 1972

Sublimatographic study on the method of test for sulfur in the petroleum and rubber products was as following results: (1) The relation between the heating temperature$(t_h)$ and the vacuum condensing point(V.C.P.) of sulfur at different degree of vacuum appeared as Fig.4. The results were in good agreement with those expected from the $t_h-V.C.P$ curves of sublimatographic separation of sulfur. (2) The relation between the degree of vacuum and the V.C.P. at different heating temperature of sulfur appeared as follows; $$tv.c.p.=\alpha+{\beta}logP_{va}$$ (3) The V.C.P of sulfur could be physical property comparing with melting point and boiling point. (4) The relation between the V.C.P. and the quantity of sublimation of sulfur becomes quantitative as Fig.7.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.149-156
• /
• 2013

The performances of solar collectors with single and double evacuated tube were experimentally compared. The solar collector with single evacuated tube using surface treatment in this study consists of radiation fin, heat pipe, absorber plate, glass tube, cap and regulating valve, and so on. Surface treatment was conducted for heat pipe and absorber plate with black chrome plating and copper black coating. As the results, the performance of solar collector with single evacuated tube using surface treatment showed good results compared that of double evacuated tube. Absorber plate played a positive role in performance and showed increase of about 28%. Further performance depends on vacuum degree and vacuum degree has to be considered economical efficiency in solar collector.

• International journal of advanced smart convergence
• /
• 제8권4호
• /
• pp.200-206
• /
• 2019

In this study, we compared the VacCAD and VacSim^(Multi), commercial vacuum simulators, to verify the advantages of VacCAD's efficiency. It was emphasized on immediacy and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and vacuum materials. First, usability of simulation mechanism was estimated through the modeling schematics and obtained simulation results of each employed simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping characteristics of commercially available high vacuum systems. In addition, the degree of tolerances on VacCAD was also investigated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacSim^(Multi) has been presented, and it was expected that the utilization of VacCAD in vacuum applications to be increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.424.1-424.1
• /
• 2016

태양전지 모듈의 봉지재로 사용되는 EVA(Ethylene-Vinyl acetate)는 외부의 환경으로부터 태양전지를 보호해주는 역할을 한다. 하지만 frame의 실링재나 glass edge 부분의 결함으로 인해 수분이 침투되어 모듈의 내부자재에 영향을 미치게 되며, 모듈의 효율 감소나 수명 단축의 원인이 된다. 이러한 결함을 줄이기 위해서는 EVA의 crosslinking degree, 절연 저항 특성을 향상시키는 것이 중요하다. 이에 본 연구에서는 EVA의 crosslinking degree를 보기 위해 soxhlet extraction method를 이용하여 gel content를 측정하였으며, 라미네이션 과정 중 curing time에 따른 gel content 변화를 확인하였다. 또한 이 실험을 바탕으로 gel content에 따른 절연 저항을 측정하여 EVA의 crosslinking degree에 의한 절연 저항 특성을 확인하였다.

• 한국주조공학회지
• /
• 제32권1호
• /
• pp.24-31
• /
• 2012

In this study, semi-solid thin plate of A 356 aluminum alloy was fabricated by using slope plate apparatus and vacuum pressurization. Slope plate was used to produce semi-solid material with spheroidal microstructures. After molten metal was poured into the slope plate connected to the pouring hole of die, semi-solid material flowed into the die cavity by vacuum degree. The primary crystals of the cast metal became spheroidal. In order to increase the working pressure, gas pressurization of U shape was designed for fabrication of thin plate. For 3 bar of gas pressure and 60 mmHg of vacuum degree, thin plate was fabricated without defects on surface.

• 대한금속재료학회지
• /
• 제46권1호
• /
• pp.13-19
• /
• 2008

To develop a recycling process of magnesium alloy scrap, a fundamental study on the distillation of magnesium alloy melt was carried out. Melt temperature, vacuum degree and reaction time were considered as experimental variables. The amount of vaporized magnesium melt per unit surface area of melt increases with the increase of melt temperature, reaction time and vacuum degree. The vapor condensed at the tip of water cooling Cu-condenser as a form of pine cone. Magnesium and zinc were vaporized easily from the melt. However, It's difficult to separate magnesium and zinc by vacuum distillation because vapor pressure of zinc is similar to one of magnesium. The contents of aluminum, manganese and iron, etc. in residual melt increase due to the decrease of magnesium and zinc content after the distillation of magnesium alloy.

• 한국식품저장유통학회지
• /
• 제20권3호
• /
• pp.317-322
• /
• 2013

전처리 유무와 포장방법에 따른 건조복숭아를 가속실험($40^{\circ}C$, 50일)하여 품질변화를 조사한 결과 중량 및 pH의 변화는 vitamin C 처리가 무처리에 비해 낮았으며, 충진방법에 따라서는 전반적으로 vacuum 처리가 passive 및 $N_2$ 처리방법에 비해 낮았다. 가용성고형분 함량은 polyethylene film에서 높았고, vacuum 처리가 passive 및 $N_2$ 처리방법에 비하여 높은 함량을 나타내었다. 적정산도의 경우는 OPP/Al/PE film이 polyethylene film다 높은 반면 vitamin C 처리 시 포장 재질 간에 유의한 수준의 값을 나타내어 vitamin C 처리가 저장 중에 온도에 의한 산의 손실을 억제하는 것으로 관찰되었다. 충진 방법에 따라서는 전반적으로 vacuum 및 $N_2$ 처리방법이 passive에 비해 높은 적정산도 값을 나타내었고, 식미와 관계가 있는 당산비에서는 vacuum 처리방법이 높은 값을 나타내었다. 색도의 변화는 전반적으로 vitamin C 처리가 무처리에 비해 낮은 변화를 보였으며 L 값, delta E 값 및 갈변도의 결과 OPP/Al/PE film 포장방법 및 vacuum 처리에서 갈변현상이 억제되는 것으로 관찰되었다. 전처리 방법에 따른 폴리페놀 및 플라보노이드 함량은 vitamin C 처리가 무처리에 비해 높은 함량을 나타내었으며, 포장재질에 따라서는 polyethylene film에 비하여 OPP/Al/PE film이 유의적으로 높은 함량을 나타내었다. 이상의 결과 무처리군의 passive 포장법에서는 갈변 및 품질열화현상이 높은 것으로 관찰되었으나 vitamin C 처리군의 vacuum-OPP/Al/PE film 포장은 갈변화 및 품질손상이 적게 관찰되어 품질유지 및 유통기간 연장을 위한 적정포장 방법이 될 것으로 사료된다.

• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.940-945
• /
• 2010

Noise reduction of vacuum cleaner is important, according as get into standard that estimate quality of product. To reduce noise of vacuum cleaner, we need analysis of correct noise source and contribution grasping about Identified noise sources' output noise. Because noise sources' correlation exists in vacuum cleaner that is small and complicated system, analysis is not easy. In this case, we need to apply Multi-dimensional spectral analysis(MDSA) method that can remove correlation between noise sources and grasp pure contribution degree of noise sources. In this study, we take transfer path analysis between output noise and noise that measured in inside/outside of vacuum cleaner.