• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.150-154
• /
• 1990

Various sterilization temperatures $(110^{\circ}C,\;120^{\circ}C,\;130^{\circ}C)$ and air volumes (air, 31ml, half-vacuum; 13ml, vacuum; -0.7ml) within the retort pouch were tested for the development of the simple retort rice processing techniques in which the pouch were filled with rice and water, and then sterilized. Water content of retort rice was found to be 59.0-63.3% resulting from mixing the rice and water in the ratio of 1:1.1. The most uniform water content was obtained from retort rice sterilized at $130^{\circ}C$ and packaged under vacuum. The larger water content differences were observed with the increase in internal air volumes within the retort pouch. Spreading degree of retort rice was geater than that of general cooked rice, was lower in upper layer than in low layer, and became lower with the larger air volume and higher sterilization temperature. a degree of rice became higher with the Increase of sterilization temperature but that was not affected by the internal air volume of the pouch. The higher sterilization temperature and the lower the air volume, the higher the whiteness was. The highest whiteness was obtained by packaging under vacuum and sterilizing at $130^{\circ}C$. Intact degree was much higer in packaging under air than vacuum. In sensory evaluation the retort rice of vacuum pack was good in color and spreading degree but not in appearance because of blocking and deforming, but that of air pack was good in texture on the contrary. The best quality was obtained by packaging under half-vacuum and sterilizing at $130^{\circ}C$.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.217-223
• /
• 2023

In this study, we compared the VacCAD and VacTran, commercial vacuum simulators, to investigate the simulation applicability and efficiency as vacuum simulation software. It was verified on reliability and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and employed vacuum materials. First, usability of simulation schematics was estimated through the modeling tools and the overall simulation characteristics of each simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping performance characteristics of commercial high vacuum system models. In addition, the degree of tolerances on both simulators was also evaluated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacTran has been presented, and it was also expected that the utilization of VacTan in vacuum applications to be increased due to the higher availability of modelling variations.

• Elastomers and Composites
• /
• v.7 no.1
• /
• pp.53-58
• /
• 1972

Sublimatographic study on the method of test for sulfur in the petroleum and rubber products was as following results: (1) The relation between the heating temperature$(t_h)$ and the vacuum condensing point(V.C.P.) of sulfur at different degree of vacuum appeared as Fig.4. The results were in good agreement with those expected from the $t_h-V.C.P$ curves of sublimatographic separation of sulfur. (2) The relation between the degree of vacuum and the V.C.P. at different heating temperature of sulfur appeared as follows; $$tv.c.p.=\alpha+{\beta}logP_{va}$$ (3) The V.C.P of sulfur could be physical property comparing with melting point and boiling point. (4) The relation between the V.C.P. and the quantity of sublimation of sulfur becomes quantitative as Fig.7.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.149-156
• /
• 2013

The performances of solar collectors with single and double evacuated tube were experimentally compared. The solar collector with single evacuated tube using surface treatment in this study consists of radiation fin, heat pipe, absorber plate, glass tube, cap and regulating valve, and so on. Surface treatment was conducted for heat pipe and absorber plate with black chrome plating and copper black coating. As the results, the performance of solar collector with single evacuated tube using surface treatment showed good results compared that of double evacuated tube. Absorber plate played a positive role in performance and showed increase of about 28%. Further performance depends on vacuum degree and vacuum degree has to be considered economical efficiency in solar collector.

• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.200-206
• /
• 2019

In this study, we compared the VacCAD and VacSim^(Multi), commercial vacuum simulators, to verify the advantages of VacCAD's efficiency. It was emphasized on immediacy and simplicity of simulation modelling, and characteristics of the pump combinations, pumping down curves, and vacuum materials. First, usability of simulation mechanism was estimated through the modeling schematics and obtained simulation results of each employed simulator were compared to evaluate the applicability in practice. Simulation reliability of each simulator was also probed by comparing the pumping characteristics of commercially available high vacuum systems. In addition, the degree of tolerances on VacCAD was also investigated through pumping down analysis considering outgassing effect due to chamber material variations. The higher effectiveness and expediency of VacCAD than VacSim^(Multi) has been presented, and it was expected that the utilization of VacCAD in vacuum applications to be increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.424.1-424.1
• /
• 2016

태양전지 모듈의 봉지재로 사용되는 EVA(Ethylene-Vinyl acetate)는 외부의 환경으로부터 태양전지를 보호해주는 역할을 한다. 하지만 frame의 실링재나 glass edge 부분의 결함으로 인해 수분이 침투되어 모듈의 내부자재에 영향을 미치게 되며, 모듈의 효율 감소나 수명 단축의 원인이 된다. 이러한 결함을 줄이기 위해서는 EVA의 crosslinking degree, 절연 저항 특성을 향상시키는 것이 중요하다. 이에 본 연구에서는 EVA의 crosslinking degree를 보기 위해 soxhlet extraction method를 이용하여 gel content를 측정하였으며, 라미네이션 과정 중 curing time에 따른 gel content 변화를 확인하였다. 또한 이 실험을 바탕으로 gel content에 따른 절연 저항을 측정하여 EVA의 crosslinking degree에 의한 절연 저항 특성을 확인하였다.

• Journal of Korea Foundry Society
• /
• v.32 no.1
• /
• pp.24-31
• /
• 2012

In this study, semi-solid thin plate of A 356 aluminum alloy was fabricated by using slope plate apparatus and vacuum pressurization. Slope plate was used to produce semi-solid material with spheroidal microstructures. After molten metal was poured into the slope plate connected to the pouring hole of die, semi-solid material flowed into the die cavity by vacuum degree. The primary crystals of the cast metal became spheroidal. In order to increase the working pressure, gas pressurization of U shape was designed for fabrication of thin plate. For 3 bar of gas pressure and 60 mmHg of vacuum degree, thin plate was fabricated without defects on surface.

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.13-19
• /
• 2008

To develop a recycling process of magnesium alloy scrap, a fundamental study on the distillation of magnesium alloy melt was carried out. Melt temperature, vacuum degree and reaction time were considered as experimental variables. The amount of vaporized magnesium melt per unit surface area of melt increases with the increase of melt temperature, reaction time and vacuum degree. The vapor condensed at the tip of water cooling Cu-condenser as a form of pine cone. Magnesium and zinc were vaporized easily from the melt. However, It's difficult to separate magnesium and zinc by vacuum distillation because vapor pressure of zinc is similar to one of magnesium. The contents of aluminum, manganese and iron, etc. in residual melt increase due to the decrease of magnesium and zinc content after the distillation of magnesium alloy.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.317-322
• /
• 2013

This study was conducted to investigate the effects of pretreatment and different packaging methods on the physicochemical properties of cold vacuum-dried peaches. All the dried peach samples were stored such as $N_2$ gas substitution, vacuum and passive packaged with polyethylene (PE) film and oriented polypropylene (OPP)/aluminum (Al)/PE film at $40^{\circ}C$ for 50 days. The weight change, pH, soluble solids content, titratable acidity, soluble solid-acid ratio (SS/TA), delta E, browning degree and phenolic compounds were analyzed. The weight change and pH were lower in the 0.1% vitamin C-treated group and were significantly lowest in the vacuum-treated OPP/AL/PE. The soluble solids content and the SS/TA were higher in the non-treated groups than in the vitamin C-treated groups. According to the packaging methods, the $L^*$ values were higher in the vacuum, $N_2$ gas and passive package, in that order. In addition, the browning degree and the delta E value were lower in the pretreated groups and significantly lowest in the vacuum-treated OPP/AL/PE with 0.1% vitamin C group. The phenolic compounds were high for the pretreated groups, according to the packaging methods (vacuum > $N_2$ gas> passive), and the OPP/AL/PE was significantly higher than the PE. These results suggest that different packaging materials and pretreatment methods affected the quality of the dried peaches, and the vacuum-OPP/AL/PE film packaging group showed a high quality.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.940-945
• /
• 2010

Noise reduction of vacuum cleaner is important, according as get into standard that estimate quality of product. To reduce noise of vacuum cleaner, we need analysis of correct noise source and contribution grasping about Identified noise sources' output noise. Because noise sources' correlation exists in vacuum cleaner that is small and complicated system, analysis is not easy. In this case, we need to apply Multi-dimensional spectral analysis(MDSA) method that can remove correlation between noise sources and grasp pure contribution degree of noise sources. In this study, we take transfer path analysis between output noise and noise that measured in inside/outside of vacuum cleaner.