• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Clean Technology
• /
• v.29 no.4
• /
• pp.244-248
• /
• 2023

Recently, displays play an important role in quickly delivering a lot of information. Research is underway to reproduce various colors close to natural colors. In particular, research is being conducted on the light emitting structure of displays as a method of expressing accurate and rich colors. Due to the advancement of technology and the miniaturization of devices, the need for small but high visibility displays with high efficiency in energy consumption continues to increase. Efforts are being made in various ways to improve OLED efficiency, such as improving carrier injection, structuring devices that can efficiently recombine electrons and holes in a numerical balance, and developing materials with high luminous efficiency. In this study, the electrical and optical properties of the seven-layer stacked structure rear-light emitting blue OLED device were analyzed. 4,4'-Bis(carazol-9-yl)biphenyl:Ir(difppy)2(pic), a blue light emitting material that is easy to manufacture and can be highly efficient and brightened, was used. OLED device manufacturing was performed via the in-situ method in a high vacuum state of 5×10-8 Torr or less using a Sunicel Plus 200 system. The experiment was conducted with a seven-layer structure in which an electron or hole blocking layer (EBL or HBL) was added to a five-layer structure in which an electron or hole injection layer (EIL or HIL) or an electron or hole transport layer (ETL or HTL) was added. Analysis of the electrical and optical properties showed that the device that prevented color diffusion by inserting an EBL layer and a HBL layer showed excellent color purity. The results of this study are expected to greatly contribute to the R&D foundation and practical use of blue OLED display devices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.11
• /
• pp.1518-1524
• /
• 2011

This study was investigated the quality characteristics and antioxidant activities of the Rehmanniae radix (Rehmannia glutinosa Libosch. var. purpurea Makino) paste (RRP) and Rehmanniae radix preparata extract (RRPP). RRP and RRPP were made from vacuum concentrates of hot water extracts. The sugar contents of RRP and RRPP were 65.3 and 72.0$^{\circ}Brix$, respectively, whereas the reducing sugar contents were 2.4% and 44.9%. The pH level was lowest in the RRPP. The DPPH and hydroxyl radical scavenging activity of RRPP were much higher than those of RRP. Total phenol contents of RRP and RRPP were 2.15 mg/mL and 12.36 mg/mL, respectively. FRAP values of RRP and RRPP were 0.55 mg/mL and 2.02 mg/mL, respectively. Based on these results, it can be concluded that RRPP was the most appropriate in terms of both physicochemical and antioxidative activities.

• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.135-145
• /
• 2004

The CLA used to add in diet was chemically synthesized by alkaline isomerization method with corn oil. Pigs were divided into 5 treatment groups (4 pigs/group) and subjected to one of five treatment diets (0, 1.25％ CLA for 2weeks, 2.5％ CLA for 2weeks, 1.25％ CLA for 4weeks and 2.5％ CLA for 4weeks, CLA diets; total fed diets) before slaughter. Pork loin were collected from the animals (110kg body weight) slaughtering at the commercial slaughter house. Manufacture press ham using CLA accumulated pork loin were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. Samples were analyzed for texture characteristics, sensory evaluation, fatty acid composition and CLA content. There was no significant difference in texture among control and CLA treatment groups. It was not clearly changed by storage time. No remarkable differences were found in sensory properties (color, flavor, texture and acceptability) between control and CLA treatment groups. It was not clearly changed by the passage of storage time. In the change of fatty acid composition, the contents of oleic, linoleic and arachidonic were decreased by dietary CLA-supplementation, whereas the increase level of CLA-supplementation resulted in the higher palmitic and stearic acid than control. As dietary CLA was increased in feed, the content of CLA in pork was increased.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.3
• /
• pp.3-16
• /
• 1974

One of the disadvantages of. wood and wood products is their hydroscopicity or dimensional instability. This is responsible for the loss of green volume of lumber as seasoning degrade. Dimensional stabilization is needed to substantially reduce seasoning defects and degrades and for increasing the serviceability of wood products. Recently, considerable world-wide attention has been drawn to the so-called Wood-Plastic Composites by irradiation-and heat-catalyst-polymerization methods and many research and developmental works have been reported. Wood-Plastic Composites are the new products having the superior mechanical and physical properties and the combinated characteristics of wood and plastic. The purpose of this experiment was to obtain the basic data for the improvement of wooden materials by manufacturing WPC. The species examined were Mulpurae-Namoo (Fraxinus, rhynchophylla), Sea-Namoo (Carpinus laxiflora), Cheungcheung-Namoo (Cornus controversa), Gorosae-Namoo (Acermono), Karae-Namoo(Juglans mandshurica) and Sanbud-Namoo (Prunus sargentii), used as blocks of type A ($3{\times}3{\times}40cm$) and type B ($5{\times}5{\times}60cm$), and were conditioned to about 10~11% moisture content before impregnation in materials humidity control room. Methyl methacrylate (MMA) as monomer and benzoyl peroxide (BPO) as initiator are used. The monomer containing BPO was impregnated into wood pieces in the vacuum system. After impregnation, the treated samples were polymerized with heat-catalyst methods. The immersed weights of monomer in woods are directly proportionated to the impregnation times. Monomer impregnation properties of Cheungcheung-Namoo, Mulpurae-Namoo and Seo-Namoo are relatively good, but in Karae-Namoo, it is very difficult to impregnate the monomer MMA. Fig. 3 shows the linear relation between polymer retentions in wood and polymerization times; that is, the polymer loadings are increasing with polymerization times. Furthermore species, moisture content, specific gravity and anatomical or conductible structure of wood, bulking solvents and monomers etc have effects on both of impregnation of monomer and polymer retention. Physical properties of treated materials are shown in table 3. Increasing rates of specific gravity are ranged 3 to 24% and volume swelling 3 to 10%. ASE is 20 to 46%, AE 14 to 50% and RWA 18 to 40%. Especially, the ASE in relation to absorption of liquid water increases approximately with increase of polymer content, although the bulking effect of the polymerization of monomer may also be influential. WPCs from Mulpurae-Namoo and Cheungcheung-Namoo have high dimensional stability, while its of Karae-Namoo and Seo-Namoo are-very low. Table 4 shows the mechanical properties of WPCs from 6 species. With its specific gravity and polymer loading increase, all mechanical properties are on the increase. Increasing rate of bending strength is 10 to 40%, compression strength 25 to 70%, ;impact bending absorbed energy 4 to 74% and tensile strength 18 to 56%. Mulpurae-Namoo and Cheungcheung-Namoo with high polymer content have considerable high increasing rate of strengths. But incase of Karae-Namoo with inferior monomer impregnation it is very low. Polymer retention in cell wall is 0.32 to 0.70%. Most of the polymer is accumulated in cell lumen. Effective. of polymer retention is 58.59% for Mulpurae-Namoo, 26.27% for Seo-Namoo, 47.98% for Cheungcheung-Namoo, 25.64% for Korosae-Namoo, 9.96% for Karae-Namoo and 25.84% for Sanbud-Namoo.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.721-732
• /
• 2008

Pressed ham was manufactured to investigate the effects of grape seed oil on the quality characteristics of pressed ham. Five treatments were divided based on differences in the amount of grape seed oil added into the pressed ham. For control, 10% of back fat was only added without grape seed oil. For the first treatment, 10% of grape seed oil among the lard component added into the pressed ham was replaced. For the 2nd, 3rd and 4rd treatments, 20%, 30% and 40% of grape seed oil was respectively replaced. Pressed ham manufactured using grape seed oil was vacuum packaged and then stored for 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory properties, TBARS and fatty acid composition. In the 1, 21 and 28 days of storage, shear force value of grape seed oil treatment (T4) was significantly lower than that of control (P<0.05). No remarkable differences were found in sensory properties among control and grape seed oil treatment groups. The TBARS value was significantly higher in control than in grape seed oil treatment group(T4) at 28 days of storage (P<0.05). The TBARS of control and grape seed oil treatment groups increased significantly as the storage period increased(P<0.05). The linoleic acid(C18:2) content of grape seed oil treatment groups was significantly higher than that of control(P<0.05). But the contents of C10:0～C20:4 were decreased significantly by grape seed oil additive (P<0.05). Saturated and monounsaturated fatty acid content of control was significantly higher than that of grape seed oil treatment groups(P<0.05). Whereas the increase level of grape seed oil additive resulted in the significantly higher polyunsaturated fatty acid content(P<0.05). Based on these findings, we conclude that the sensory properties and lipid oxidation(TBARS) of manufactured pressed ham were not affected by grape seed oil addition. Also, our results indicate that high-quality pressed ham can be manufactured with strengthen of polyunsaturated fatty acid content.

• Food Science and Preservation
• /
• v.15 no.2
• /
• pp.174-184
• /
• 2008

The quality and storage characteristics of low salted onion and five cereals-doenjang (DFO) were investigated. At the DFO, soybean koji ($57{\sim}62%$), onion (3%) and salt (8%) were mixed with equal amount of rice, barley, glutinous millet and glutinous indian millet ($10{\sim}30%$), and water ($7{\sim}12%$). The storage of DFO was done by vacuum packing in polypropylene tube, and sterilized at $121^{\circ}C$. The fermentation and storage was conducted for 60 days at $25^{\circ}C$ at each condition. Control doenjang (GD) was the salinity of 16% soybean doenjang that was not sterilized and packed in plastic containers for storage. During the fermentation, pH of DFO was lower than GD. The pH maintained stability during the storage, and revealed to be lowered, as the proportion of mixed cereals was higher. During the fermentation of DFO, the brix degree revealed to be higher than GD and maintained s1ability during the storage. During the fermentation and storage, the amino nitrogen content of DFO was ranged $400{\sim}470mg%$ by showing higher content than GD and maintained stable content during the storage. During the fermentation, the activities of protease and ${\beta}$-amylase were maintained to be high at DFO, but the activities during the storage were high at GD. The color $L^*$ value of DFO during fermentation and storage maintained higher values than GD, but $a^*$ value revealed lower pattern. Total free amino acids of DFO was ranged $1,918{\sim}2,290mg%$ which was higher than GD that recorded 1,291 mg%. When the sensory evaluation was conducted for DFO that was fermented and stored for 60 days, the DFO mixed with $20{\sim}30%$ of cereals resulted to have more savory taste, flavor, and sweeter than GD, and overall acceptability for color and overall taste was high.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.3
• /
• pp.169-175
• /
• 2012

Purpose: In this study, brazing characteristics of $ZrO_2$ and Ti-6Al-4V brazed joints with increasing temperature were investigated. Materials and methods: The sample size of the $ZrO_2$ was $3mm{\times}3mm{\times}3mm$ (thickness), and Ti-6Al-4V was $10mm(diameter){\times}5mm(thickness)$. The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under $5{\times}10^{-6}$ torr atmosphere, while the brazing temperature was changed from 700 to $800^{\circ}C$ for 30 min. Results: The experimental results shows that brazed joint of $ZrO_2$ and Ti-6Al-4V occurred at $700-800^{\circ}C$. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of $ZrO_2$ and Ti-6Al-4V bonded interfaces decreased with brazing temperature. Conclusion: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between $ZrO_2$ and Ti did not occur enough.

• Korean journal of food and cookery science
• /
• v.14 no.4
• /
• pp.394-399
• /
• 1998

The juice of garlic (Euichun variety) was extracted and concentrated by heating at 90$^{\circ}C$, by using a rotary vacuum evaporator at 45$^{\circ}C$, or by freezing at -50$^{\circ}C$ until the volume was reduced to 70% of the original's. The concentrated garlic juice was packed into 15 ml test tubes wrapped with aluminum foil and kept at 4$^{\circ}C$ or 25$^{\circ}C$ for 60 days. Changes of browning, microbiological and sensory characteristics of the concentrated garlic juices were monitored every 10 days. The specific gravity and viscosity of the prepared juices decreased in the juices concentrated at 90$^{\circ}C$, 45$^{\circ}C$ and -50$^{\circ}C$ in order. Browning of the concentrated garlic juices was slower during the storage at 4$^{\circ}C$ than at 25$^{\circ}C$. Browning occurred rapidly in the juice concentrated at 45$^{\circ}C$ during the storage, especially at 25$^{\circ}C$. The numbers of mesophilic and psychrotrophic bacteria in the juices did not increase significantly during the storage, which means the garlic juices had good shelf-life. The CFUs/ml of garlic juice concentrated at 90$^{\circ}C$ were lower about 1 to 2 log cycles than those in other concentrated juices. The juice concentrated at 90$^{\circ}C$ showed the weakest garlic odor and the strongest cooked odor among the juices. The juice concentrated at -50$^{\circ}C$ had the freshest odor, especially stored at 4$^{\circ}C$, but the juice concentrated at 90$^{\circ}C$ had lowest score in fresh odor. Brown color was dark in the juice concentrated at 45$^{\circ}C$ and green color of all the juices did not change significantly during the storage.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.80-86
• /
• 2007

This experiment was conducted to investigate the changes of pork meat quality characteristics exposed to ozone gas for 5, 10, and 15 min and then vacuum packaged during storage for 0, 5, 10, 15, and 20 day at $4^{\circ}C$. The ozone gas exposed groups of pork loin cuts (OZM) had slightly higher pH value compared to the control at day 0 and 5 (p<0.01). The 15 min exposure of ozone gas groups showed significantly (p<0.01) higher TBARS value than that of control at the day 15 and 20. However, there was no significant difference in all groups at day 0,5, and 10. The CIE $L^*$ and $b^*$ values of OZM showed no significant difference between control and ozone gas treated groups during storage. The loin cut color of ozone gas exposure for 15 min had significantly lower CIE $a^*$ values than the other groups at day 0,5, and 15 (p<0.01). The aerobic plate count and coliform bacteria count of pork loin cuts exposed ozone gas significantly (p<0.01) was reduced at day 0 by about $0.45-1.04\;log_{10}CFU/g$ and $0.26-0.30\;log_{10}CFU/g$, respectively. As ozone gas exposure time extended, the aerobic plate count and coliform bacteria count of OZM were increased at day 0, 5, and 10 (p<0.01). However, there were no significant differences observed among groups at day 20 in the counts of aerobic and coliform bacteria. In conclusion, the meat cuts exposed to ozone gas for 5 and 10 min before packing may be a reasonable packing method regarding the effects of ozone level on meat oxidation, color change and microbial reduction.