• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.761-766
• /
• 2020

Phenylamine derivatives are substances that have a biochemical action and are widely applied as psychotropic drugs. In particular, with regard to the quantitative analysis of substances such as ephedrine, amphetamine, pentermine, and dopamine, many previous studies such as electrochemical, vacuum ultraviolet method, and gas chromatography have been conducted. However, there have not been many studies on the structural characteristics of molecular units. Therefore, In this study, we used (HyperChem8.0's, HC) semi-empirical PM3 method to calculate the total energy, band gap, electrostatic potential, and net charge of ephedrine, amphetamine, pentamine and dopamine to investigate the chemical properties of each derivative according to the molecular structure change. The results showed that for total energy -43,171.8, -32,9538.3, -36,407.3 and -43,061.2 Kcal/mol, respectively, while for band gaps, 10.16379377, 9.9531666, 9.7878002 and 9.0589282 eV. Also, for electrostatic potentials, 1.301~-0.045, 1.694~0.299, 0.694~-0.158 and 1.587~-0.048 respectively. Finally, looking at the distribution of net charges, the oxygen atoms, nitrogen atoms and carbon atoms were -0.312~-0.242, -0.161~-0.051 and +0.13~-0.12 respectively. These results are expected to lead to chemical action centered on phenyl radicals and oxygen and nitrogen atoms common to phenethylamine derivatives.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.168-173
• /
• 2005

Ag-doped $TiO_2$ thin films were prepared by RF magnetron co-sputtering method, and their physical and chemical properties were examined as a function of calcination temperature. XRD results showed that the crystallite size of Ag-doped films was smaller than that of the $TiO_2$ thin films. SEM results showed that the particle size of $Ag/TiO_2$ film was smaller and more uniform than pure $TiO_2$ film. The films had high transparency in the visible range. The films calcined at $600^{\circ}C$ were the anatase phase, and the films calcined at $900^{\circ}C$ were a mixture of anatase and rutile phases. The absorption edge of films calcined at $900^{\circ}C$ was red-shifted. This is due to the augmented absorption resulting from the phase transformation from anatase to rutile phase. And the transmittance of films decreased by the light scattering and absorption in the films. Photocatalytic activity of $Ag/TiO_2$ thin films was higher than that of the pure $TiO_2$ thin films.

• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.1-7
• /
• 2006

The effects of packaging material and method on quality of fresh-cut mushrooms (Agaricus bisporus Sing.) were investigated in terms of weight loss, surface color, phenolics, vitamin C and sensory characteristics during storage at $5^{\circ}C$. The fresh-cut mushrooms were subjected to passive, gas exchange and vacuum packaging conditions at st. Polyethylene film (PE), polypropylene film (PP), anti-fogging film (AP) and pen orated film (PF) were used for the passive packaging. The mixed gas of $5\% CO_2/\;2\%O_2$ (MA1) and $10\%CO_2/\;2\%O_2$(MA2) were applied for the gas exchange packaging. The respiration rate of sliced mushroom was 1.27 times higher than intact mushroom at $5^{\circ}C$. Gas concentrations in the passive packaging were $1-2\%\;O^2\;and\;5-16\%m$ during storage of sliced mushrooms for 14 days at $5^{\circ}C$, and levels of the gases were different by the films used The mushroom in perforated film (PF) showed the highest weight loss of $4.56\%$. Anti-fogging film (AF) was somewhat effective for prevention of the weight loss compared with other films after 14 days storage. The mushrooms in MA1 and MA2 packages showed lower delta L value than in other films. PE packaging mitigated decrease of free and bound phenolics during storage. The mushrooms in MA2 kept better quality in sensory aspect, and then in MA1, PE and PP in order during storage at $5^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.512-518
• /
• 2001

It has been well known that 6.5wt% Si steel sheets have excellent magnetic properties such as low core loss. high maximum permeability and low magnetostriction. In this work, we studied a method for producing 6.5wt% Si steel sheets using a chemical vapor deposition (CVD) method. The following is the procedure adopted in this work to produce 6.5wt% Si steel sheets; SiCl$_4$ gas is applied onto a low content-Si steel sheet placed in a tube furnace. Silicon atoms resulted from the decomposition of SiCl$_4$ are permeated through the surface of the steel sheet. Finally, by the diffusion process maintaining it under a high temperature the silicon atoms diffuse uniformly into the sheet. Through this process, 6.5wt% Si steel sheets can be obtained. The manufactured Fe-6.5wt% Si steel sheet with a thickness of 0.5mm exhibited a high frequency core loss (W$_{2}$1k/) of 8.92 W/kg. Its permeability increased from 37,100 to 53,300 at 1 tesular(T). The mechanical properties of the manufactured steel sheets were also estimated and the result showed that the workability was significantly improved by annealing in vacuum at 773k. Increased plastic deformation was also observed prior to fracture and the amount of grain boundary rupture was reduced.

• Korean Journal of Materials Research
• /
• v.10 no.4
• /
• pp.270-275
• /
• 2000

The Pt/YMnO$_3$/Y$_2$O$_3$/Si structure for metal/ferroelectric/insulator/semiconductor(MFIS)-FET was fabricated and effect of $Y_2$O$_3$layer on the properties of MFIS structure was investigated. The $Y_2$O$_3$ thin films on p-type Si(111) substrate deposited by Pulsed Laser Deposition were crystallized along (111) orientation irrespective of the deposition temperatures. Ferroelectric YMnO$_3$ thin films deposited directly on p-type Si (111) by MOCVD resulted in Mn deficient layer between Si and YMnO$_3$. However, YMnO$_3$ thin films having good quality and stoichiometric composition can be obtained by adopting $Y_2$O$_3$ buffer layer. The memory window of the $Y_2$O$_3$thin films with YMnO$_3$ film is greater than that of the YMnO$_3$ thin films without $Y_2$O$_3$ film after the annealing at 85$0^{\circ}C$ in vacuum ambient(100mtorr). The memory window is 1.3V at an applied voltage of 5V.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.743-748
• /
• 2013

The purposes of this study are to prepare Hanji fiber-filter sheets using replacement liquid in water-swollen fiber with non-polar solvent such as ethanol, methanol and pentane. The experiments were studied on the selection of optimal non-polar solvent and the optimal drying method for wetted fiber and then were to know physicochemical characteristics of prepared Hanji fiber-filter sheet. The Ethanol as liquid changer in water-swollen fiber was excellent solvent and the optimal drying method for them was freeze drying served with vacuum pump. The bulk density and porosity of prepared fiber sheet from freeze dryer were 0.11-0.13 g/mL, half of natural dried fiber sheet, and 90%, respectively. The results of SEM observation for the fiber sheet prepared with natural drying or heating drying were shown very close structure of fiber wall in dry state. However, the freeze drying sheet were shown the open structure. So, the head loss of freeze drying sheet was very lower than natural drying and heating drying sheets. From the results of BTEX removal experiments, the sheets dried at water wetted condition was shown more higher efficiency than the fiber sheets dried at solvent wetted condition.

• Journal of Biosystems Engineering
• /
• v.26 no.5
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.142-145
• /
• 2005

AC-PDP에서 발광 휘도와 발광 효율의 개선은 매우 중요한 과제중의 하나이다. 높은 발광 휘도와 발광 효율을 위해선 VUV의 높은 발광 효율이 요구되어진다. 이 실험에서는 AC-PDP에서 Ne-Xe의 2원 혼합기체와 He-Ne-Xe의 3원 혼합기체의 VUV 발광 세기를 측정하였다. 기체 압력은 200 Torr, 300 Torr, 400 Torr, 500 Torr로 유지하였고, Xe 혼합비는 1%, 2%, 4%, 7%, 10%, 15%를 사용하였다. 진공자외선 발광 세기는 He-Ne-Xe의 3원 혼합기체가 Ne-Xe의 2원 혼합기체보다 발광 세기가 훨씬 높다는 것을 알 수 있었다. 그리고 Xe 함량이 증가함에 따라 공명선인 147 nm의 발광 세기는 Xe 혼합비가 약 10%까지는 증가하다가 10% 이후에는 포화되고, 반면 분자선인 173 nm은 Xe 함량과 가스 압력이 증가함에 따라 발광 세기가 증가하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.10
• /
• pp.738-746
• /
• 2019

Instead of hydraulic actuation systems, an electromechanical actuation system is more efficient in terms of weight, cost, and test evaluation in the thrust vector control of the 7-ton gimbal engine used in the Korea Space Launch Vehicle-II(KSLV-II) $3^{rd}$ stage. The electromechanical actuator is a kind of servo actuator with position feedback and uses a BLDC motor that can operate at high vacuum. In the case of the gimballed rocket engine, a synthetic resonance phenomenon may occur due to a combination of a vibration mode of the actuator itself, a bending mode of the launcher structure, and an inertial load of the gimbals engine. When the synthetic resonance occurs, the control of the rocket attitude becomes unstable. Therefore, the requirements for the stiffness have been applied in consideration of the gimbal engine characteristics, the support structure, and the actuating system. For the 7-ton gimbal engine of the KSLV-II $3^{rd}$ stage, the stiffness requirement of the actuation system is $3.94{\times}10^7N/m$, and the direct drive type electromechanical actuator is designed to satisfy this requirement. In this paper, an equivalent stiffness analysis model of a direct drive electromechanical actuator designed based on the stiffness requirements is proposed and verified by experimental results.

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.22-27
• /
• 2004

In order to endow mackerel fillet with antioxidant effect, functionality and remove fishy smell, chitosan, oligosaccaride, extracts of green tea, dill weed and ginger was used as soaking solution additives. Quality characteristics of soaked mackerel fillet(SMF) was investigated during storage temperature and time after vacuum packing with polyvinyl chloride film. From the results of VBN measurement, initial spoilage was showed within 2 or 3 weeks in SMF soaked with brine including extracts of green tea, herb and ginger at 5$^{\circ}C$. In case of adding chitosan and oligosaccarides to the solution mentioned above, initial spoilage was found from 4 to 7 weeks, oxidation was reduced remarkably and SMF stored at -20$^{\circ}C$ maintained the freshness during 80 days. Viable cell counts were reached to 108 for 3 weeks storage at 5 and 0$^{\circ}C$. But no change of viable cell counts was founded at -20$^{\circ}C$. The shelf-lifes of SMF according to 5, 0 and -20$^{\circ}C$storage temperatures were 2 to 3, 4 to 7 weeks and about 3 months, respectively.