• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.1 s.49
• /
• pp.85-89
• /
• 2005

An aim of this study is to study the correlation between rheological properties and sedimentation of capsules in aqueous polymer solution with low viscosity. Rheological properties of aqueous polymer solutions were controlled by carbomer (C), acylate/C10-30 alkyl acylate crosspolymer (AC), and ammonium acryloyldimethyltaurate/VP copolymer (AV). Small amount of polymer C solution had the highest viscosity and yield stress of polymer AV solution was higher than that of polymer C solution in the same viscosity when the concentration of polymer AV exceeded $0.35 wt\%$. Each aqueous polymer solution was tested and the results showed that as viscosity and yield stress increased, the sedimentation ratio of capsules decreased. The viscoelasticity data also showed the same tendency in a shear stress range of 0.1 to 2.0 Pa. These results demonstrated that the rheological properties of polymer solutions had a strong correlation with the sedimentation of capsules. When polymer I and AV were used, there was a synergistic effect and the correlation between rheological properties and sedimentation of capsules was very complicated. It was assumed that the characteristics of polymer structure and interaction between polymers caused this phenomena.

• Journal of Environmental Health Sciences
• /
• v.31 no.5 s.86
• /
• pp.372-378
• /
• 2005

To enhance educational effect for exhaust ventilation system, more instructive educational engineering such as experimental system should be needed. This study was performed to 1) manufacture the basic experimental system for local exhaust ventilation, 2) experiment with this system and 3) develop methodology of exhaust ventilation education. With this system, three pressures (static pressure(SP), velocity pressure(VP) and total pressure(TP)) were measured and illustrated and the graphic shapes agreed to theoretical ones relatively. Entry loss factor ($F_h$) of each hood was found to be different with hood shape, duct velocity and flow rate. This result implies that precise $F_h$ should be determined case by case and a industrial hygienist should not be dependent on the existing values. Pressure loss using velocity pressure method and characteristics of air movement near hoods using fume were grasped with this system. But larger system should be recommended to produce more precise experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.588-591
• /
• 2018

Baculovirus was originally isolated from the alfalfa looper and contains a 134-kbp genome with 154 open reading frames (ORF). The major capsid protein VP39 together with some minor proteins forms the nucleocapsid ($21nm{\times}260nm$) that encloses the DNA with p6.9 protein. They are double-stranded, circular, supercoiled DNA molecules in a rod-shaped capsid. Wild-type baculoviruses exhibit both lytic and occluded life cycles that develop independently throughout the three phases of virus replication. Recombinant baculoviruses can transfer their vectors and express their recombinant proteins in a wide range of mammalian cell types. Especially, inclusion of a dominant selectable marker in these baculoviral vectors can express diverse recombinant genes in many cells. Baculoviral vectors were reconstructed with cytomegalovirus (CMV) promoter,uroplakin II promoter, polyhedron promoter, vesicular stomatitis virus G (VSVG), enhanced green fluorescent protein (EGFP), protein transduction domain (PTD) gene and so on. These reconstructed vectors were infected into various cell and cell lines. We performed transfection and expression of these recombinant vectors comparison with other control vectors. From this study, we knew that transfection and expression of these recombinant vectors have higher efficacy than any control vector. This work was supported by a grant from Mid-Career Researcher Program(NRF-2016R1A2B4016552) through the National Research Foundation of Korea(NRF) funded by the Ministry of Science, ICT & Future Planning(MSIP).

• Progress in Medical Physics
• /
• v.27 no.1
• /
• pp.31-36
• /
• 2016

The paper discusses radiation dose of dual energy CT on which copper modulation layer, is mounted in order to improve diagnostic performance of the dual energy CT. The radiation dose is estimated using MCNPX and its results are compared with that of the conventional dual energy CT system. CT X-ray spectra of 80 and 120 kVp, which are usually used for thorax, abdominal, head, and neck CT scans, were generated by the SPEC78 code and were used for the source specification 'SDEF' card for MCNPX dose modeling. The copper modulation layer was located 20 cm away from a source covering half of the X-ray window. The radiation dose was measured as changing its thickness from 0.5 to 2.0 mm at intervals of 0.5 mm. Since the MCNPX tally provides only normalized values to a single particle, the dose conversion coefficients of F6 tally for the modulation layer-based dual energy CBCT should be calculated for matching the modeling results into the actual dose. The dose conversion coefficient is $7.2*10^4cGy/output$ that is obtained from dose calibration curve between F6 tally and experimental results in which GAFCHORMIC EBT3 films were exposed by an already known source. Consequently, the dose of the modulation layer-based dual energy cone beam CT is 33~40% less than that of the single energy CT system. On the basis of the results, it is considered that scattered dose produced by the copper modulation layer is very small. It shows that the modulation layer-based dual energy CBCT system can effectively reduce radiation dose, which is the major disadvantage of established dual energy CT.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.93-102
• /
• 2012

Thanks to the rapid increase of the interest in the quality control of the General X-ray systems, this research proposes the direction of the quality control through comparing and inspecting the actual condition of the respective quality control in the Clinic, the educational institution and the hospital. The subjects of the investigation are diagnostic radiation equipment's in the clinic, the educational institution and the hospital around the capital. A test of kVp, mR/mAs out put test and reproducibility of the exposure dose, half value layer, an accordance between the light field and the beam alignment test, and lastly reproducibility of the exposure time. Then the mean difference of the percentage, the CV (Coefficient of Variation, CV) and the attenuated curve which are respectively resulted from the above tests are computed. After that we have evaluated the values according to the regulations on the Diagnostic Radiation Equipment Safety Administration regulations. In the case of the clinic and the educational institution, there were 22 general X-ray devices. And 18.2% of the kVp test, 13.6% of the reproducibility of exposure dose test, 9.1% of the mR/mAs out put test, and 13.6% of the HVL (Half Value Layer) test appeared to be improper. In the case of the hospital, however, there were 28 devices. And 7.1% of the reproducibility of exposure dose, 7.1% of the difference in the light field/ beam alignment, and 7.1% of the reproducibility of the exposure time appeared to be improper. According to the investigation, the hospital's quality control condition is better than the condition in the clinic and the educational institution. The quality control condition of the general X-ray devices in the clinic is unsatisfactory compared to the hospital. Thus, it is considered that realizing the importance of the quality control is necessary.

• Journal of radiological science and technology
• /
• v.47 no.1
• /
• pp.13-19
• /
• 2024

Control of scattered radiation is one of very important factors in the use of medical radiation. In general X-ray exam, the causes, measurement methods, and the kind of detectors of scattered rays within the radiation area are diverse. In this study, the dose of scattered ray was measured by changing the thickness of the polycarbonate phantom and the tube voltage. As a result of measurement of scattered radiation, the results show that the scattered dose significantly(p<.05) increased with growing of thickness of phantom in the tube voltage 40, 50 and 60 kVp(F(p)<.05, R²>64%). As tube voltage increased at all phantom thicknesses, the scattered dose also significantly(p<.05) increased(F(p)<.05, R²>69%). In cases where a significant correlation was shown, the coefficient of determination of more than 60% was shown in regression analysis. The results of this study can be used as data on scattered radiation dose according to the tube voltage and the object thickness in general X-ray imaging exam.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.2
• /
• pp.273-281
• /
• 2002

Purpose. The study was done to develop nursing guidelines to prevent nursing negligence in the clinical setting that would lead to malpractice. Method. A comprehensive review of the literature and focus groups interviews were used to search for malpractice cases related to "observation", one of the most basic nursing activities. The cases were analyzed with respect to nursing practice and a legal expert was consulted on the content. Results. 4 malpractice cases related to observation negligence were selected for this study; 1) a case of failing to observe dyspnea after a thyroidectomy, 2) a case of failing to observe a depressed patient for suicide attempts, 3) a case of failing to observe a VP shunt obstruction, 4) a case of failing to observe a cardiac ischemia after a bronchoscopy. 11 guidelines were developed for clinical nurses and 13 guidelines for nursing managers. Conclusion. These guidelines are useful in preventing malpractice due to nursing negligence. Therefore nurses need to apply them to their practices and continue to make an effort to develop guidelines for other malpractice situations.

• Korean Journal of Veterinary Service
• /
• v.27 no.4
• /
• pp.355-369
• /
• 2004

The equine herpesvirus type 1 (EHV-1) immediate-early (IE) protein is a potent transactivator responsible for the activation of both early and late genes during the course of infection and is comprised of discrete functional domains that mediate its many functions. Interaction between trans activators such as the IE protein and various components of the RNA polymerase II transcription initiation machinery has been demonstrated to be critical for transactivation. In the present report, it is addressed the hypothesis that the IE protein interacts with various components of transcription machinery to mediate transactivation of target viral genes. In these studies, it is demonstrated that in vitro transcribed and translated IE protein interacts with TFIIB-agarose conjugate but not with TFIID-agarose conjugate. Additional immunoprecipitation studies using nuclear extracts derived from EHV-1 infected RK-13 cells confirmed that the IE protein interacts strongly with TFIIB, but fails to interact with TFIID. IR2, a truncated form of the IE protein lacking the potent transactivation domain and involved in the down-regulation of the IE gene, also interacted with TFIIB but not with TFIID. Studies were also performed to ascertain if particular TBP-associated factors (TAFs) could mediate IE or IR2 binding to TFIID. In vitro transcribed and translated TAF250 added to nuclear extracts generated from EHV-1 infected cells also failed to mediate an interaction between the IE protein or the IR2 protein and TFIID. This study demonstrated that the IE protein mediates transactivation of target viral genes by a mechanism that involves TFIIB. This is in contrast to mechanisms that have been proposed for both the herpes simplex virus ICP4 and VP16 protein which have been proposed to transactivate viral genes through interactions involving both TFIIB and TFIID. This study also intimates that IR2 mediate its repressive effects during the course of EHV-1 infection by a mechanism that involves sequestration of various transcription factors.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.615-621
• /
• 2021

In the medical field, radiation provides information for the diagnosis and treatment of diseases. As the use of radiation increases and the risk of exposure increases, interest in radiation protection is also rapidly increasing. Lead shielding material is mainly used, which has a risk of lead poisoning and absorption into the body. Tungsten mixed filament shielding sheets were fabricated with a size of 70 × 70 mm and a thickness of 1, 2, and 4 mm by using a 3D printer. In the general shooting experiment, the thickness of the shielding sheet is 1 ~ 5mm, the tube voltage is 60, 80, 100, 120 kVp and the tube current is 20, 40 mAs. In general photography, Tungsten showed better shielding rate compared to Brass, Copper, and Lead protective tools under all irradiation conditions, and in particular, Tungsten 5 mm showed 100% shielding rate. The 3D-printed tungsten mixed filament shielding is expected to be used as a new shield that can replace the existing lead protection tools as it shows a better shielding rate than the existing lead protection tools in Radiography.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.393-400
• /
• 2017

The purpose of this study is to suggest a method to reduce the dose by Analyzing the dose area product (DAP) and image quality according to the change of tube current using NEMA Phantom. The spatial resolution and low contrast resolution were used as evaluation criteria in addition to signal to noise ratio (SNR) and contrast to noise ratio (CNR), which are important image quality parameters of intervention. Tube voltage was fixed at 80 kVp and the amount of tube current was changed to 20, 30, 40, and 50 mAs, and the dose area product and image quality were compared and analyzed. As a result, the dose area product increased from $1066mGycm^2$ to $6160mGycm^2$ to 6 times as the condition increased, while the spatial resolution and low contrast resolution were higher than 20 mAs and 30 mAs, Spatial resolution and low contrast resolution were observed below the evaluation criteria. In addition, the SNR and CNR increased up to 30 mAs, slightly increased at 40 mAs, but not significantly different from the previous one, and decreased at 50 mAs. As a result, the exposure dose significantly increased due to overexposure of the test conditions and the image quality deteriorated in all areas of spatial resolution, low contrast resolution, SNR and CNR.