• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1740-1746
• /
• 2008

The present study performed numerical investigation to analyze the smoke behavior in the rescue station by using the commercial CFD code (FLUENT Ver 6.3). The present study adopted a 10MW ultrafast mode for simulation, and it also used the MVHS(Modify Volumetric Heat Source) model modified from the original VHS(Volumetric Heat Source) model in order to treat the product generation and the oxygen consumption under the stoichiometric state. In addition, the present simulation includes the species conservation equation for the materialization of heat source and the estimation of smoke movement. From the results, the smoke flows are moving along the ceiling because of thermal buoyancy force and as time goes, the smoke gradually moves downward at the vicinity of the entrance. Moreover, without using ventilation, it is found that the smoke flows no longer spread across the cross-passages because the pressure in the non-accident tunnel is higher than that in the accident tunnel.

• 설비공학논문집
• /
• 제18권4호
• /
• pp.344-350
• /
• 2006

The present study investigates the characteristics of fire-driven heat flows and gas concentration in a compartment fire by using the modified VHS model (MVHS). The main idea of this model is to add some source terms for combustion products and oxygen consumption to the original VHS model for providing more accurate and useful information on gas concentration distributions as well as thermal fields. It is found that the present MVHS model shows fairly good agreement with the experimental data and the eddy breakup combustion model. The tilting angle of fire plume calculated by MVHS is larger than that of EBU model because the fire source of VHS is affected by ventilating flow less than EBU. However, this discrepancy is apparently reduced in the downstream region of fire source.

• Environmental Engineering Research
• /
• 제21권3호
• /
• pp.233-240
• /
• 2016

The research aims to study the different flexible rubber tube diffusers used in urban wastewater treatment processes and aquaculture systems. The experiment was conducted in small-scale aeration tank with different physical properties of the tubes that were used as aerators. The volumetric mass transfer coefficient ($k_La$), oxygen transfer efficiency (OTE) and aeration efficiency (AE) were measured and determined to compare the diffusers. Moreover, the bubble hydrodynamic parameters were analyzed in terms of bubble diameter ($d_B$) and rising velocity ($U_B$) by a high speed camera (2,000 frames/s). Then the interfacial area (a) and liquid-side mass transfer coefficient ($k_L$) can be calculated. The physical properties (tube wall thickness, tensile strength, orifice size, hardness and elongation) have been proven to be the key factor that controls the performance (kLa and OTE). The effects of hardness and elongation on bubble formation, orifice size and a-area were clearly proved. It is not necessary to generate too much fine bubbles to increase the a-area: this relates to high power consumption and the decrease of the kL. Finally, the wall thickness, elongation and hardness associated of the flexible tube diffuser (tube No. 12) were concluded, to be the suitable properties for practically producing, in this research.

• 한국환경생태학회지
• /
• 제29권4호
• /
• pp.626-635
• /
• 2015

최근 숲길 이용자들이 폭발적으로 증가하고 있으며, 이에 따라 각종 안전장치를 위한 비용 또한 급격히 증가하고 있다. 그럼에도 다른 사고와 달리 심장관련 사고는 줄지 않고 있어 숲길에 제공되는 난이도 정보의 개선방안에 대한 연구를 지리산 둘레길을 대상으로 진행하였다. 기존 숲길에 대한 난이도 정보는 숲을 관리하는 특정인에 의한 경험적 난이도 또는 단순히 거리를 바탕으로 한 난이도를 3~5단계로 구분하여 제공하고 있어 탐방객이 실제 느끼는 난이도와는 괴리감이 있었다. 본 연구에서는 실질적인 에너지소모량을 바탕으로 한 난이도 제공 가능성을 분석하였다. 거리와 경사에 따른 산소소모량의 계산은 숲길 각 구간에 대한 절대적 비교뿐만 아니라 상대적 비교가 가능하였으며 특정 구간의 운동강도를 간단히 표현하는데 효과적이었다. 아울러 시 종점의 변화에 따른 운동량 변화를 쉽게 확인할 수 있었다. 구간별, 산행방향별 운동량에 대한 표준화된 사전 정보제공은 심장관련 사고의 사전예방 효과가 있을 것으로 판단된다.

• Journal of Microbiology and Biotechnology
• /
• 제27권5호
• /
• pp.947-955
• /
• 2017

Herbicidin A is a potent herbicide against dicotyledonous plants as well as an antibiotic against phytopathogens. In this study, fermentation parameters for herbicidin A production in submerged culture of Streptomyces scopuliridis M40 were investigated. The herbicidin A concentration varied with the C/N ratio. High C/N ratios (>4) resulted in a herbicidin A production of more than 900 mg/l, whereas maximally 600 mg/l was obtained at ratios between 1 and 3.5. In 5-L batch fermentation, there was a positive correlation between the oxygen uptake rate (OUR) and herbicidin A production. Once the OUR increased, the substrate consumption rate increased, leading to an increase in volumetric productivity. Mechanical shear force affected the hyphal morphology and OUR. When the medium value of hyphal size ranged from 150 to $180{\mu}m$, high volumetric production of herbicidin A was obtained with OUR values >137mg $O_2/l{\cdot}h$. The highest herbicidin A concentration of 956.6 mg/l was obtained at 500 rpm, and coincided with the highest relative abundance of hyphae of $100-200{\mu}m$ length and the highest OUR during cultivation. Based on a constant impeller tip speed, which affects hyphal morphology, herbicidin A production was successfully scaled up from a 5-L jar to a 500-L pilot vessel.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.25-30
• /
• 2009

본 연구에서는 철도 화재 시 구난역에서의 화재 연기의 거동을 파악하기 위하여 상용코드를 사용하여 수치해석 하였다. 화원의 모사와 화재로 인한 생성물의 거동을 예측하기 위해 stoichiometric상태에서 연료 소모량에 따른 연소생성물의 생성률과 산소 소모율을 VHS 모델에 적용하고 종의 보존 방정식을 해석하는 HVHS 모델을 이용하였다. 해석결과 화재 연기는 온도에 따른 밀도 차에 의해 터널의 천장을 따라 이동 하였으며 열원으로부터 멀어지면서 하강하는 형태를 확인 할 수 있었다. 또한 터널 내 공기는 화원으로 집중되었으며 비사고 터널과 사고 터널의 압력 차에 의해 화재연기는 별다른 환기 시스템 없이도 비사고 터널로 유입되지 않았다.

• Journal of Microbiology and Biotechnology
• /
• 제21권4호
• /
• pp.430-437
• /
• 2011

The effects of the agitation and aeration rates on the production of serratiopeptidase (SRP) in a 5-L fermentor (working volume 2-l) were systematically investigated using Serratia marcescens NRRL B-23112. The dissolved oxygen concentration, pH, biomass, SRP yield, and maltose utilization were all continuously measured during the course of the fermentation runs. The efficiencies of the aeration and agitation were evaluated based on the volumetric mass transfer coefficient ($K_La$). The maximum SRP production of 11,580 EU/ml with a specific SRP productivity of 78.8 EU/g/h was obtained with an agitation of 400 rpm and aeration of 0.075 vvm, which was 58% higher than the shake-flask level. The $K_La$ for the fermentation system supporting the maximum production (400 rpm, 0.075 vvm) was 11.3 $h^{-1}$. Under these fermentor optimized conditions, kinetic modeling was performed to understand the detailed course of the fermentation process. The resulting logistic and Luedeking-Piret models provided an effective description of the SRP fermentation, where the correlation coefficients for cell growth, SRP formation, and substrate consumption were 0.99, 0.94, and 0.84, respectively, revealing a good agreement between the model-predicted and experimental results. The kinetic analysis of the batch fermentation process for the production of SRP demonstrated the SRP production to be mixed growth associated.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.287-290
• /
• 2006

Orbiter mechanism has been applied to vacuum pump design for small oxygen generator where low vacuum of about 200mmHg is required. Performance of the designed vacuum pump has been numerically investigated: calculated volumetric and adiabatic efficiencies were 69.7% and 83.9%, respectively for leakage clearance of $10{\mu}m$. Total efficiency of the orbiter vacuum pump was 77.5%. At the shaft speed of 1700 rpm suction displacement volume of 6.3cc provided discharge flow at the rate of 2.3 liter/min with power consumption of 10.1Watt. Torque variation of the orbiter pump was only about 20% of that of diaphragm pump.

• 한국유체기계학회 논문집
• /
• 제9권5호
• /
• pp.28-35
• /
• 2006

Orbiter mechanism has been applied to vacuum pump design for small oxygen generator where low vacuum of about 200 mmHg is required. Performance of the designed vacuum pump has been numerically investigated: calculated volumetric and adiabatic efficiencies were 69.7% and 83.9%, respectively for leakage clearance of $10{\mu}m$. Total efficiency of the orbiter vacuum pump was 77.5%. At the shaft speed of 1700 rpm suction displacement volume of 6.3cc provided discharge flow at the rate of 2.3 liter/min with power consumption of 10.1Watt. Torque variation of the orbiter pump was only about 20% of that of diaphragm pump.

• Applied Biological Chemistry
• /
• 제39권3호
• /
• pp.172-176
• /
• 1996

Candida parapsilosis ATCC 22019 돌연변이주를 이용하여 xylitol 생산에 영향을 주는 배양 조건인 pH와 온도 그리고 교반속도 및 산소전달속도등의 환경인자가 Xylitol의 생성에 미치는 영향을 살펴보았다. 발효조에서 pH가 증가 할수록 균체농도와 기질소비속도가 증가하여 발효시간이 단축되었다. 그러나, Xylitol생산은 pH 4.5와 5.5에서 큰 차이 없이 50g/l의 xylose로 부터 약 34g/l로 최대농도를 보여주었다. 온도가 증가 할수록 최대 비증식속도가 증가하였지만 최종 균체농도는 감소하였고, xylitol 생산성은 $30^{\circ}C$에서 최대값을 보여주었다. 산소전달속도의 영향을 조사하기 위하여 발효조의 교반속도를 변화시키면서 배양한 결과 균체농도는 산소 전달속도가 높을수록 증가하였지만, xylitol 생산은 크게 감소하였다. 교반속도를 150rpm(산소전달속도 $30\;hr^{-1}$에 해당)으로 배양할때 발효시간 62시간에서 50g/l의 xylose로 부터 xylitol 농도가 35.8g/l로 최대값을 나타내었다. Xylitol 생산성을 증가시키기 위하여 1차 발효가 끝난 발효조에서 균체를 회수하여 20g/l로 농축하여 최적조건인 pH 4.5, $30^{\circ}C$, 산소전달속도 $30\;hr^{-1}$에서 재배양을 하였을 때 50g/l의 xylose가 배양시간 약 18시간만에 모두 이용되었고 전환수율 80%에 해당하는 40g/l의 Xylitol이 생성되었다. 이때 Xylitol의 생산성은 2.22g/l-hr으로 일반 발효때 얻은 $0.5{\sim}g/l-hr$ 보다 약 $3{\sim}4$배 증가되었다.