• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.91-103
• /
• 2005

In designing a video-on-demand (VoD) system, the major challenge may be how to reduce the channels concurrently used maintaining the client's waiting time. For this reason, the various architectures which integrate the multicast streams with the unicast streams were suggested in order to improve channel efficiency in recent years. In combining multicast with unicast, the ways to group the unicast channels together are important so that clients can share the multicast transmission channels. This paper proposes a hybrid video-on-demand system which gathers the unicast channels in new ways and shares multicast transmission channels efficiently by using dynamic channel allocation architecture. The numerical results demonstrate that the proposed architecture in some case achieves performance gain of $551{\%}$ compared to existing architecture. This paper presents procedure of channel release and reuse, performance analysis, and simulation results of the dynamic channel allocation architecture.

• Fashion & Textile Research Journal
• /
• v.8 no.3
• /
• pp.349-356
• /
• 2006

The purpose of this study was to compare the thermophysiological responses and subjective sensations of clothing materials with different water transfer property investigated in exercising and resting subjects at an ambient temperature of $20^{\circ}C$ and a relative humidity of 40%. Two kinds of clothing ensemble were tested: 100% cotton with highly water-absorbent but slowly dry properties(C) and 100% polyester with quickly water-absorbent and dry properties by four capillary channels(QADP). Seven apparently healthy male participants each undertook two series of experiments comprised 10-min of rest, 20-min of exercise with 70% of $VO_{2max}$ on a treadmill and 20-min of recovery. Mean skin temperature was significantly lower in QADP than in C during exercise and recovery. Clothing microclimate temperature was significantly lower in QADP during exercise and clothing surface temperature was also lower in QADP especially during recovery. Also, clothing surface humidity was significantly higher in QADP after the later half of exercise. The concentration of blood lactic acid tended to decrease to a lower level at recovery 3 minutes when wearing QADP rather than C clothing ensemble. Metabolic energy was marginally significantly less during the second half of exercise in QADP. Body mass loss tended to be greater in C than in QADP. The participants had better scores in thermal sensation, comfortable sensation and wetness in QADP during exercise and recovery. These results show that functional materials with quickly water-absorbent and dry properties can alleviate heat strain and induce more comfortable clothing microclimates and subjective sensations in the exercise-induced hyperthermia.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.304-313
• /
• 2015

Background: Ginsenoside Rg3 is a promising anticancer agent. It is usually produced by heat treatment of ginseng, in which ginsenoside Rb1 is the major ginsenoside. A kinetic study was conducted to optimize ginsenoside Rg3 production by the heat treatment of ginsenoside Rb1. Methods: Ginsenoside Rb1 was heated using an isothermal machine at $80^{\circ}C$ and $100^{\circ}C$ and analyzed using HPLC. The kinetic parameters were calculated from the experimental results. The activation energy was estimated and used to simulate the process. The optimized parameters of ginsenoside Rg3 production are suggested based on the simulation. Results: The rate constants were $0.013h^{-1}$ and $0.073h^{-1}$ for the degradation of ginsenosides Rb1 and Rg3 at $80^{\circ}C$, respectively. The corresponding rate constants at $100^{\circ}C$ were $0.045h^{-1}$ and $0.155h^{-1}$. The estimated activation energies of degradation of ginsenosides Rb1 and Rg3 were 69.2 kJ/mol and 40.9 kJ/mol, respectively. The rate constants at different temperatures were evaluated using the estimated activation energies, and the kinetic profiles of ginsenosides Rb1 and Rg3 at each temperature were simulated based on the proposed kinetic model of consecutive reaction. The optimum strategies for producing ginsenoside Rg3 from ginsenoside Rb1 are suggested based on the simulation. With increased temperature, a high concentration of ginsenoside Rg3 is formed rapidly. However, the concentration decreases quickly after the reaching the maximal concentration value. Conclusion: The optimum temperature for producing ginsenoside Rg3 should be the highest temperature technically feasible below $180^{\circ}C$, in consideration of the cooling time. The optimum reaction time for heat treatment is 30 min.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.183-190
• /
• 2012

Internet Protocol Television(IPTV) is the use of an IP broadband network to deliver television (cable TV type) services to the end user. Traditional telecommunications service providers as well as alternate service providers and Internet service providers can utilize their IP networks (and broadband consumer access) to deliver broadcast TV, Video on Demand (VOD) and other Internet services to the consumer. As digital technologies progress, illegal copy and redistribution of IPTV content become easier and simpler. Therefore it is required to protect IPTV content or service. In this paper, we analyze the security threats and requirements. We also discuss related issues and solutions for IPTV.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.67-78
• /
• 2010

Various services such as IPTV, VoIP, multimedia over IP, on-line payment, on-line game, etc. were made possible due to the rapid advance of the network. In order to provide secure and seamless services over the network, the Internet service providers are performing continuous network monitoring using NMS. The main function of NMS is to perform a diagnosis to identify the potential causes of failure from event messages. In this paper, a simulation tool, named as NetDoctor, is presented which is capable of identifying and diagnosing the potential problems in the virtual network, before the network model is constructed. In NetDoctor, a series of various and artificial failure is imposed on the virtual network, and it was analyzed if NetDoctor could identify the problems. The experimental results on virtual network show that the developed tool is very effective in identifying and diagnosing the problems. The presented simulation tool can be used in the design of robust network.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.395-404
• /
• 2012

In this paper, the perceived loudness metering algorithm based on ITU-R BS.1387-1 was investigated and implemented, and its performance was evaluated by applying to 23 pure tones and 9 digital audio samples. Error of the tone test results compared with ISO226:2003 was below 5%, and sample test results, in comparison with Moore's algorithm, showed deviation of less than 4.7% and correlation of 0.96. On the other hand, it was investigated how the implemented algorithm's performance was subject to auditory pitch scale. Its result showed that the algorithm with 37 auditory filters, through correcting a bias effect, has a good performance of less than 2% in comparison with the one with 109 auditory filters.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.81-85
• /
• 2011

$V_{0.9}Sb_{0.1}O_x$ systems, bulk and deposited on different supports (five types of $\gamma$-aluminas, $\alpha$-alumina, silica-alumina, silica gel, magnesium oxide), have been tested in the oxidative dehydrogenation (ODH) of iso-butane. Catalytic performance of VSb oxides has shown to be highly dependent on the support and the nature of the support decreasing in a series: $\gamma$-$Al_2O_3$ > $\alpha$-$Al_2O_3$ > Si-Al-O > $SiO_2$ $\approx$ MgO $\gg$ unsupported. Variation of the V-Sb-O-loading in the studied range of coverage (0.5-2 theoretical monolayer) only slightly influences the catalysts' activity and selectivity. The best catalytic performance of $\gamma$-alumina-supported $V_{0.9}Sb_{0.1}O_x$ systems can be explained by the optimal surface interaction between support and supported components resulting in the formation of well-spread amorphous active $VO_x$-component with vanadium in a high oxidation state.

• Clean Technology
• /
• v.22 no.4
• /
• pp.250-257
• /
• 2016

As an attempt to replacing petroleum-based chemicals with bio-based ones, synthesis of furfural from biomass-derived xylose attracts much attention in recent days. Conventionally, furfural from xylose has been produced via the utilization of highly corrosive, toxic, and environmentally unfriendly mineral acids such as sulfuric acid or hydrochloric acid. In this study, microwave-assisted biphasic reaction process in the presence of novel bio-based heterogeneous acid catalysts was developed for the eco-benign and effective synthesis of furfural from xylose. The microwave was irradiated for reaction acceleration and a biphasic system consisting of $H_2O$ : MIBK (1 : 2) was designed for continuous extraction of furfural into the organic phase in order to reduce the undesired side products formed by decomposition/condensation/oligomerization in the acidic aqueous phase. Moreover, sulfonated amorphous carbonaceous materials were prepared from wood powder, the most abundant lignocellulosic biomass. The prepared catalysts were characterized by FT-IR, XPS, BET, elemental analysis and they were used as bio-based heterogeneous acid catalysts for the dehydration of xylose into furfural more effectively. For further optimization, the effect of temperature, reaction time, water/organic solvent ratio, and substrate/catalyst ratio on the xylose conversion and furfural yield were investigated and 100% conversion of xylose and 74% yield of furfural was achieved within 5 h at $180^{\circ}C$. The bio-based heterogeneous acid catalysts could be used three times without any significant loss of activity. This greener protocol provides highly selective conversion of xylose to furfural as well as facile isolation of product and bio-based heterogeneous acid catalysts can alternate the environmentally-burdened mineral acids.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.668-672
• /
• 2001

The purpose of study was to measure the interrater reliability of the caries diagnostic instrument, Diagnodent(KaVo, Germany), using a new laser fluorescence technique. Occlusal surfaces and smooth surfaces of one hundred extracted human premolars and molars were examined by four dentists. Pearson correlation coeffcients were 0703 to 0.870 for occlusal surfaces and 0.764 to 0.932 for smooth surfaces (P<0.01, all). Reliability coefficients which were calculated by intraclass correlation coefficients were 0.9450 for occlusal surfaces and 0.9605 for smooth surfaces. Therefore, the interrater reliability of caries diagnosis by Diagnodent is very high, and the rater training would be necessary more for occlusal surfaces than for smooth surfaces.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.38-46
• /
• 1998

Management of children who show negative response to treatment was difficult. Usually the dentist used the restraintor sedatives for these children. Especially it is very difficult to management of definitely negative behavior patients who resist to ordinary sedative technics including psychosedation and various sedatives. These patients were managed with general anesthesia. Midazolam was used for sedation of non-cooperative pediatric patients and halothane for induce initial sleepness, If the patient shows negative response to management after 15 minutes of midazolam administration, used the halothane in 30 to 120 seconds for calm down the patient. After induce sleepness, cut off the halothane administration and maintain the sedation with $N_2O$ in 50-70 vol.% concentration. This technic reduce the toxity and untoward effects of major anesthetics. To compare the difference of sedation effect by dosage, dose of 0.2mg/kg and 0.3mg/kg were injected respectively. Though there's no statistical difference in duration and results between two dosage but show the increment of score with age, If the patients show positive response to management after midazolam administered. try to conscious sedation with nitrous oxide in 30 to 70 vo.% concentration. Nitrous oxide concentration was administered slowly according to their consciousness and response to treatment by increment or decrement. The success rate of conscious sedation were 21.2% in 0.2mg/kg and 30.3% in 0.3mg/kg. There's many factors in proceed of conscious sedation. The most important factors are age of patient and experience of children for dental care.