• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.102-110
• /
• 2004

In this paper, we propose a VLSI structure of real-time image compression and reconstruction processor using 2-D discrete wavelet transform and implement into a hardware which use minimal hardware resource using ASIC library. In the implemented hardware, Data path part consists of the DWT kernel for the wavelet transform and inverse transform, quantizer/dequantizer, the huffman encoder/huffman decoder, the adder/buffer for the inverse wavelet transform, and the interface modules for input/output. Control part consists of the programming register, the controller which decodes the instructions and generates the control signals, and the status register for indicating the internal state into the external of circuit. According to the programming condition, the designed circuit has the various selective output formats which are wavelet coefficient, quantization coefficient or index, and Huffman code in image compression mode, and Huffman decoding result, reconstructed quantization coefficient, and reconstructed wavelet coefficient in image reconstructed mode. The programming register has 16 stages and one instruction can be used for a horizontal(or vertical) filtering in a level. Since each register automatically operated in the right order, 4-level discrete wavelet transform can be executed by a programming. We synthesized the designed circuit with synthesis library of Hynix 0.35um CMOS fabrication using the synthesis tool, Synopsys and extracted the gate-level netlist. From the netlist, timing information was extracted using Vela tool. We executed the timing simulation with the extracted netlist and timing information using NC-Verilog tool. Also PNR and layout process was executed using Apollo tool. The Implemented hardware has about 50,000 gate sizes and stably operates in 80MHz clock frequency.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.5
• /
• pp.17-26
• /
• 1997

Interconnect characterization on a wafer level was performed. Test patterns for single, two-coupled, and triple-coupled lines ere designed by using 0.5$\mu\textrm{m}$ CMOS process. Then interconnect capacitances and resistances were experimentally extracted by using tow port network measurements, Particularly to eliminate parasitic effects, the Y-parameter de-embedding was performed with specially designed de-embedding patterns. Also, for the purpose of comparisons, capacitance matrices were calculated by using the existing CAD model and field-solver-based commercial simulator, METAL and MEDICI. This work experimentally verifies that existing CAD models or parameter extraction may have large deviation from real values. The signal transient simulation with the experimental data and other methodologies such as field-solver-based simulation and existing model was performed. as expected, the significantly affect on the signal delay and crosstalk. The signal delay due to interconnects dominates the sub-micron-based a gate delay (e.g., inverter). Particularly, coupling capacitance deviation is so large (about more than 45% in the worst case) that signal integrity cannot e guaranteed with the existing methodologies. The characterization methodologies of this paper can be very usefully employed for the signal integrity verification or he electrical design rule establishments of IC interconnects in the industry.

• ETRI Journal
• /
• v.27 no.5
• /
• pp.504-510
• /
• 2005

This paper proposes a novel low-power video decoding scheme. In the encoded video bitstream, there is quite a large number of non-coded blocks. When the number of the non-coded blocks in a frame is known at the start of frame decoding, the workload of the video decoding can be estimated. Consequently, the supply voltage of very large-scale integration (VLSI) circuits can be lowered, and the power consumption can be reduced. In the proposed scheme, the encoder counts the number of non-coded blocks and stores this information in the frame header of the bitstream. Simulation results show that the proposed scheme reduces the power consumption to about 1/10 to 1/20.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.139-142
• /
• 2000

In this paper, the ADI (Adaptive De-interlacing) algorithm is proposed, which improves visually and subjectively horizontal and vertical edges of the image processed by the ELA(Edge Line-based Average) method. This paper also proposes a VLSI architecture for the proposed algorithm and designed the architecture through the full custom CMOS layout process. The proposed algorithm is verified using C and Matlab and implemented using 0.6$\mu\textrm{m}$ 2-poly 3-metal CMOS standard libraries. For the circuit and logic simulation, Cadence tool is used.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.7-10
• /
• 2004

This paper describes techniques to implement low-cost adapt ive Pipelined LMS filter for ASIC implement ions of high communication receivers. Power consumpiton can be reduced using a careful selection of architectural, algorithmic, and VLSI circuit techlifue A Pipelined architecture for the strength-reduced algorithm is then developed via the relaxed look-ahead transformation. This technique, which is an approximation of the conventional look-ahead compution, maintains the functionality of the algorithm rather than the input-output behavior Convergence maiysis of the Proposed architecture has been presented and support via simulation results. The resulting pipelined adaptive filter achives a higher though put requires lower power as compared to the filter using the serial algorithm.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.435-438
• /
• 2004

This paper presents a new analytical model to suppress RLC resonance effects in power/ground lines due to a decoupling capacitor. First, the resonance frequency of an RLC circuit which is composed of package inductance. decoupling capacitor, and output drivers is accurately estimated. Next, using the estimated resonance frequency, a suitable decoupling capacitor sire is determined. Then, a novel design methodology to suppress the resonance effects is developed. Finally, its validity is shown by using $0.18 {\mu}m$ process-based-HSPICE simulation.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.197-202
• /
• 2012

As more and more cores are integrated on a single chip, power consumption has become an important problem in system-on-a-chip (SoC) design. Multiple supply voltage (MSV) design is one of popular solutions to reduce power consumption. We propose a new method that determines voltage level of cores before floorplanning stage. Besides, our algorithm includes a new approach to optimize wire length and the number of level shifters without any significant decrease of power saving. In simulation, we achieved 40-52% power saving and a considerable improvement in runtime, whereas an increase in wire length and area is less than 8%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.119-123
• /
• 2002

A new modular Lateral Information Propagation Networks(LIPN) has been designed. The LIPN has shown to be useful for reconstruction of information[3]. The problem is the fact that only the small number of nodes can be implemented in a IC chip with the circuit VLSI technology. The proposed modular architecture is propagated the neural network through inter module connections. For such inter module connections, the host (computer or logic) mediates the exchange of information among modules. Also border nodes in each module have capacitors for temporarily retaining the information from outer modules. The LIPN with $4{\times}4$ modules has been designed and simulation of interpolation with the designed LIPN has been done.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.5
• /
• pp.94-103
• /
• 1997

It is necesary that analog buffer circuit should drive an external load in the VLSI design such as switched capacitor efilter (SCF), D/A converter, A/d converter, telecommunicatin circuit, etc. The conventional CMOS buffer circuit have many probvlems according as CMOS technique. Firstly, Capacity of large load ar enot able to opeate well. The problem can be solve to use class AB stages. But large load are operated a difficult, because an element of existing CMOS has a quadratic functional relation with inptu and outut voltage versus output current. Secondly, whole circuit of dynamic rang edecrease, because a range of inpt and output voltages go down according as increasing of intergration rate drop supply voltage. In this paper suggests that new differential CMOS line driver make out of operating an external of large load. In telecommunication's chip case transmission line could be a load. It is necessary that a load operate line driver. The proposal circuit is planned to hav ea high generation power rnage of voltage with preservin linearity. And circuit of capability is inspected through simulation program (HSPICE).

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.3
• /
• pp.62-67
• /
• 2002

From the view point of VLSI implementation, a new teaming algorithm suited for network with quantized connection weights is desired. This paper presents a new teaming algorithm for the DBM(deterministic Boltzmann machine) network with quantized connection weight. The performance of proposed algorithm is tested with the 2-input XOR problem and the 3-input parity problem through computer simulations. The simulation results show that our algorithm is efficient for quantized connection neural networks.