• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1571-1578
• /
• 1999

In this paper, we present the Modulator Channel Card and VLSI chip for the Radio Transceiver Unit (RTU) of direct sequence code division multiple access (DS-CDMA) Wireless Local Loop (WLL) System. The Modulator Channel Card is designed and implemented using ASIC's, FPGA's and DSP's. The ASIC, compliance with Common Air Interface specification proposed by ETRI, has 40K gates which is designed to operate at 32MHz, and is fabricated using $0.6\mu\textrm{m}$ CMOS process. The ASIC carries out for I- or Q- phase data channel signal processing at a time, where each data channel processing consists of channel coding, block interleaving, scrambling, Walsh modulation, Pseudo-Noise (PN) spreading, and baseband filtering. The Modulator Channel Card has been integrated as a part of RTU of WLL system and is confirmed that it meets all functional and performance requirements.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.1-7
• /
• 1999

We present VLSI architecture for a high performance 2-D DCT processor which is used compressing system of real time image processing or HDTV using fast computational algorithm of the Optimized Integer Cosine Transform(OICT). The coefficients of the OICT are integer, so the OICT performs only the integer operations for both forward and inverse transform. Therefore the proposed architecture could be greatly enhanced in improving the speed, reduced the hardware cost considerably by replacing the multiplication operations with shift and addition operations compared with DCT which performs floating-point operations.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.4
• /
• pp.20-26
• /
• 2000

In the recently our 21C, it is a necessary to provide the VLSI design education methods based on the electronic information systems. In this paper, we will show a education model of the venture study programs concern with Micro-Robot making. The development education systems apply into the industrial fields from the specification major module instruction including improve the VLSI design capability using the Micro-Robot making for information communication techniques. Also, the development instruction model provides one in the field system to the industrial applications specification technical staffs and VLSI design for the venture education programs. We expect the proposed education systems extended into a new venture instruction program sets for technical major members.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1565-1575
• /
• 1997

A new encryption algorithm had been proposed as a replacement to the Data Encryption Standard (DES) in [1,2]. It called the Extended DES (EDES) has a key length of 112 bits. The plaintext data consists of 96 bits divided into 3 sub-blocks of 32 bits each. The EDES has a potentially higher resistance to differential cryptanalysis that the DES due to the asymmetric number of f functions performed on each of the 3 sub-blocks and due to the increase of S-boxes from 8 to 16. This paper propose a hardware design for the EDES and its implementation in VLSI. The VLSI chip implements data encryption and decryption in a single hardware unit. With a system clock frequency of 15Mhz the device permits a data conversion rate of about 90Mbit/sec. Therefore, the chip can be applied to on-line encryption in high-speed networking protocols.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.104-112
• /
• 1989

A design automation method for sequential circuits implementation by mans of PLA is discussed, and an optimal state-code assignment algorithm to minimize the PLA area is proposed. In order to design sequential circuit automatically, DASL (Design Automation Support Language) [8] which is easy to describe and powerful to synthesize, is proposed and used to describe sequential circuit, An optimal statecode assignment algorithm which considers next states and outputs simultaneously is proposed, and by adopting this algorithm to various examples, the area of PLA is reduced by 10% comparing privious methods. This system is constructed to design microinstruction, FSM, VLSI control part synthesis.

• ETRI Journal
• /
• v.37 no.3
• /
• pp.562-572
• /
• 2015

For a multiprocessor System-on-Chip (MPSoC) to achieve high performance via parallelism, we must consider how to partition a given application into different components and map the components onto multiple processors. In this paper, we propose a software pipeline-based partitioning method with cyclic dependent task management and communication optimization. During task partitioning, simultaneously considering computation load balance and communication optimization can cause interference, which leads to performance loss. To address this issue, we formulate their constraints and apply an integer linear programming approach to find an optimal partitioning result - one that requires a trade-off between these two factors. Experimental results on a reconfigurable MPSoC platform demonstrate the effectiveness of the proposed method, with 20% to 40% performance improvements compared to a traditional software pipeline-based partitioning method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10A
• /
• pp.1604-1612
• /
• 2000

This paper proposes a simultaneous hardware resource allocation and binding algorithm for VLSI design. The proposed algorithm works on scheduled input graph and simultaneously allocates binds functional units, interconnections and registers by considering interdependency between operations and storage elements in each control step, in order to share registers and interconnections connected to functional units, as much as possible. Also, the register allocation is especially executes the allocation optima us-ing graph coloring techniques. Therefore the overall resource is reduced. This paper shows the effectiveness of the proposed algorithm by comparing experiments to determine number of functional unit in advance or to separate executing allocation and binding of existing system.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.679-682
• /
• 1998

This paper presents the VLSI implementation of RS(reed-solomon) decoder using the Modified Euclidean Algorithm(hereafter MEA) for DVD(Digital Versatile Disc) and CD(Compact Disc). The decoder has a capability of correcting 8-error or 16-erasure for DVD and 2-error or 4-erasure for CD. The technique of polynomial evaluation is introduced to realize syndrome calculation and a polynomial expansion circuit is developed to calculate the Forney syndrome polynomial and the erasure locator polynomial. Due to the property of our system with buffer memory, the MEA architecture can have a recursive structure which the number of basic operating cells can be reduced to one. We also proposed five criteria to determine an uncorrectable codeword in using the MEA. The overall architecture is a simple and regular and has a 4-stage pipelined structure.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.250-253
• /
• 2001

Mechanical properties of gold bonding wire for VLSI packaging have been studied. The diameters of gold wires are about 20-30 micrometer and fracture loads are 8-20 gram force. The elastic modulus, yield strength, fracture strength and elongation properties have been evaluated by micro-tensile test method. This work discusses for an appropriate selection of micro-force testing system and grip design in mim testing. The best method to determine gauge length of wire and to measure tensile properties has been proposed. The mechanical properties such as strength and elastic modulus of current gold bonding wire are higher than pure those of gold wire.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1536-1539
• /
• 1987

This paper describes the method to extract CIF(Caltech Intermediate Form) by the digital image processing techniques from the VLSI chip. It is possible to represent to the layout editing system. The resolution of the image is 512 512 and 12 bits.