• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.64-70
• /
• 2001

In all the Rapid Prototyping (RP) techniques, the computer-aided design (CAD) model of a three-dimensional part is sliced into horizontal layers of uniform, but not necessarily constant, thickness in the building direction. Each cross- sectional layer is successively deposited and, at the same time, bonded onto the previous layer. The stacked layers form a physical part of the model. The objective of this study is to develop a software for automatic generation of unit shape part(USP) for a new RP process, Variable Lamination Manufacturing using the linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S). In order to examine the applicability of the developed software to VLM-S, USPs of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.760-765
• /
• 2001

A new rapid prototyping process, as a transfer type of Variable Lamination Manufacturing by using expandable polystyrene foam (VLM-ST), has been developed to reduce building time, apparatus cost including the introduction and the maintenance and additional post-processing. The objective of this study is to propose a VLM-ST process and to develop an apparatus for implementation of the process. Design criteria of the apparatus were defined and the techniques were proposed to satisfy the design criterion. In order to examine the efficiency and applicability of the developed process, various three-dimensional shapes, such as a world-cup logo, a knob shape and a character, Son-o-kong, were fabricated on the apparatus in which unit shape layer (USL) was generated to build up each layer.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.95-105
• /
• 2002

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. However, RP technologies have disadvantageous characteristics according to their working principle: low building speed, high cost for introduction and maintenance of RP apparatus, stair-stepped surface and additional post processing. A new rapid prototyping process, as a transfer type of Variable Lamination Manufacturing by using expandable polystyrene room (VLM-ST), has been developed to reduce building lime. apparatus cost including the introduction and the maintenance and additional post-processing. The objective of this study is to propose a VLM-ST process and to develop an apparatus for implementation of the process. Design criteria of the apparatus are defined and the techniques arc proposed to satisfy the design criterion. In order to examine the efficiency and applicability of the developed process, various three-dimensional shapes, such as a world-cup logo. a knob shape, an extruded cross, a twisted shape, a character, Son-o-kong. a helical gear shaped and a scissor shape are fabricated on the apparatus in which unit shape layer (USL) was generated to build up each layer.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.54-63
• /
• 2001

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of a part due to layer-by-layer stacking, low build speed caused by point-by-point or line-by-line solidification to build one layer, and additional posts processing to improve surface roughness, so high cost is required to introduce and to maintain the RP apparatus. The objective of this study is to develop a new RP process, Variable Lamination Manufacturing by using expandable polystyrene foam sheet as part material(VLM-S), and to design an apparatus for implementation of the process. So, the process parameters and design criterions of the apparatus were defined and the techniques were proposed to satisfy the design criterion. Based on the results, a knob-shape, pyramid shape. and a solid block were fabricated on the apparatus in which unit shape part(USP) was generated for building each layer.

• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.129-138
• /
• 2012

에너지 균형조건을 고려하여 중형 태양광 추진 고고도 장기체공 무인기의 다분야 통합 최적설계를 수행하였다. 무인기의 공력 모델로 Vortex Lattice Method (VLM)를 사용하였으며 Cruz가 제안한 중량분석 모델로서 비행체 중량을 추정하였다. 비행체의 세로 정안정성 확보를 위하여 꼬리날개의 부피비를 고정하고 정안정성을 확보할 수 있도록 꼬리날개의 위치를 결정하였다. 태양전지, 축전지, 비행 고도 등 사용가능한 에너지와, 비행체의 필요에너지를 비교하여 24시간 지속비행 가능성을 결정하였다. 태양 입사 에너지는 북위 $36^{\circ}$의 여름을 기준으로 하였으며, 주간비행 중 태양에너지를 이용한 상승비행으로 확보한 위치에너지를 이용하여 야간 비행에 필요한 에너지를 보충하였다. 이를 바탕으로, 무인기의 주요 치수, 중량 분포 최적 설계와 장기체공을 실현할 수 있는 비행전략을 제시하였다.

• 한국정보과학회논문지:데이타베이스
• /
• 제31권2호
• /
• pp.91-98
• /
• 2004

DHP 연관 규칙 탐사 알고리즘은 후보 빈발 항목 집합들에 대한 계수를 유지하기 위한 해쉬트리의 크기를 가능한 한 줄이기 위하여, 독립된 직접 해쉬 테이블을 미리 준비해 놓았다가 후보 빈발 항목 집합을 생성할 때 적용함으로써 전지 효과를 얻는다. 이 때 직접 해쉬 테이블의 크기가 클수록 전지효과는 커지며, 특히 길이 2인 후보 빈발 항목 집합을 생성하는 단계에서의 전지 효과는 알고리즘 전체의 성능을 좌우할 만큼 큰 영향을 발휘한다. 따라서 급속도로 보편화되고 있는 대용량 주기억장치 시스템 추세에 따라 단계 2에서의 직접 해쉬 테이블 크기의 극단적인 증가에 대한 시도가 이루어지고 있으며, 이러한 것 중의 하나가 완전 해쉬 테이블이다. 그러나 단계 2에서의 완전 해쉬 테이블을 사용할 경우, 이를 단순히 기존 DHP 알고리즘에 적용하여 버켓 크기(｜H$_2$｜)만을 재 설정하는 것 보다, DHP 알고리즘 자체를 조금 변경했을 때 약 20% 이상의 추가 성능 이득을 얻을 수 있음이 밝혀졌다. 이 논문에서는 단계 2에서의 완전 해쉬 테이블의 타당성을 조명해 본 후, 그 특성을 충분히 활용하도록 DHP를 개선한 PHP 알고리즘을 제안하며 그 결과를 실험적 환경에서 검증한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.184.1-184.1
• /
• 2010

Floating wind turbines have been suggested as a feasible solution for going further offshore into deeper waters. However, floating platforms cause additional unsteady motions induced by wind and wave conditions, so that it is difficult to predict annual energy output of wind turbines by using conventional power prediction method. That is because sectional inflow condition on a rotor plane is varied by unsteady motion of floating platforms. Therefore, aerodynamic simulation using Vortex Lattice Method(VLM) were used to investigate the influence of motion on the aerodynamic performance of a floating offshore wind turbine. Simulation with individual motion of offshore platform were compared to the case of onshore platform and carried out according to the wave height and the wave angular frequency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.623-624
• /
• 2004

The coating and estimation of gas and moisture barriers on polymer and glass substrates are receiving very much attention in passivation of organic light emitting devices (OLEDs). In this study, the encapsulation and lifetime measurement techniques of OLEDs were presented. The degradation mechanisms of bare and encapsulated OLEDs were investigated by the visual lifetime measurement (VLM) system with the parameters such as a pixel luminance(L), a luminance rms roughness(dL), a brightness area ratio(R), an edge degradation depth(D), etc.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.93-100
• /
• 2007

Post swirl stator is an energy saving device to recover rotational energy of the propeller. To optimize the performance of post swirl stator in container vessels, computational fluid dynamics using body force method was introduced. A commercial code Fluent was used in conjunction with body force distributed on the surface of actuator disk which is located in the propeller plane to optimize pitch angle of the post swirl stator blade. This study showed that CFD is an important tool to simulate flow behind ship with propeller, rudder and post swirl stator.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.261-264
• /
• 2006

This paper describes the effects to wind turbine blade aerodynamics due to interaction between blade and tower on upwind type HAWT. In order to analyze effects of blade-tower interact ion, the analyst s program WINFAS which is based on VLM(Vortex Lattice Method), Free wake and FVE model is used. In this study, the changes of wind turbine blade aerodynamics caused by blade-tower interact ion are Investigated with various parameters windshear, yaw error, TSR and tower diameter.