• International journal of advanced smart convergence
• /
• v.11 no.4
• /
• pp.88-95
• /
• 2022

Vacuum simulation is associated with the prediction and calculation of how materials, pumps and systems will perform using mathematical equations. In this investigation, three different high vacuum systems were simulated and estimated with each vacuum characteristics by VacTran simulator. In each of modelled vacuum systems, selection of gas loads into vessel, combination of rough and high vacuum pumps and dimension of conductance elements were proposed as system variables. In pump station model, the pumping speed to pressures by the combination of root pump was analyzed under the variations of vessel volume. In this study, the effects of outgassing dependent on vessel materials was also simulated and aluminum vessel was estimated to optimum materials. It was obtained from the modelling with diffusion pump that the diameter, length of 50×250[mm]roughing line was characterized as optimum variables to reach the ultimate pressure of 10E-7[torr]. Optimum design factors for vacuum characteristics of modelled vacuum system were achieved by VacTran simulator. Feasibility of VacTran as vacuum simulator was verified and applications of VacTran in high tech process expected to be increased.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.390-396
• /
• 2009

The aim of this study was to evaluate endodontic irrigation methods with $EndoVac^{(R)}$ and $EndoActivator^{(R)}$ in the elimination of Enterococcus faecalis from the root canals. Extracted 70 human single-rooted teeth were used. The canals were instrumented by a crown-down technique with .04 taper ProFile to ISO size 40. After the teeth were autoclaved, the canals were inoculated with E. faecalis and incubated for 48 h. The teeth were randomly divided into three experimental groups of 20 teeth each according to canal irrigation methods and two control groups as follows: group 1 - $EndoVac^{(R)}$; group 2 - $EndoActivator^{(R)}$; group 3-Conventional needle irrigation method. After canal irrigation using 2.5% NaOCl. first samples (S1) were taken using sterile paper point. And the canals were filled with sterile brain heart infusion (BHI) broth and incubated for 24 h, then second samples (S2) were taken. The samples were cultured on BHI agar plate to determine the numbers of colony forming units (CFU). In first sampling (S1), only one canal of conventional method among the all experimental groups was positive cultured. In second sampling (S2), $EndoVac^{(R)}$ group showed the least positive culture numbers of E. faecalis. There was statistically significant difference between the $EndoVac^{(R)}$ and conventional needle irrigation methods in the mean value of Log CFU. According to the results of this study, $EndoVac^{(R)}$ showed better efficacy than conventional needle irrigation method in the elimination of E. faecalis from the root canal.

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.80-85
• /
• 1980

The free radical copolymeriaztion of N-vinylurea(VU) with vinyl acetate (VAc) was carried out at $60^{\circ}C$ in three solvents. VU-vinyl alcohol(VA) copolymers were prepared by the methanolysis of the VU-VAc copolymers. From the nitrogen content measurements of VU-VA copolymers, the monomer reactivity ratios for the VU-VAc copolymerization and the values of Alfrey-Price's Q and e for VU were determined. These Q and $\varrho$ values obtained in the cases of using methanol and methanol-dioxane as the polymerization solvents are comparable with those found for other monomers which have > NCO-pendent groups. The $\varrho$ value indicates that the urea group of VU is a electron-donating group. The copolymerization parameter of VU shows a strong effect of the solvents. These results are interpreted to be that VU is in equilibrium with its tautomer at the polymerization temperature.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.2
• /
• pp.156-162
• /
• 2008

Purpose: Open fractures of the foot and ankle require prompt repair of the wound due to the complexity of anatomy, insufficiency of soft tissues and inadequate blood supply. Early flaps and skin grafts are used for this purpose yet general condition of the patient as well as local wound environment often precludes such treatment options. Vacuum- Assisted Closure (VAC) is recently being used in such cases. This study was done to validate the use of VAC together with silver antimicrobial dressing materials in contaminated open fracture wounds. Materials and Methods: We have selected 10 patients with Gustillo-Anderson type III open fractures of the foot & ankle treated with VAC and silver antimicrobial dressing materials from March 2007 to January 2008. The relationship between duration of treatment with wound size, contamination, and degree of soft tissue damage was analyzed. Results: The average age of patients was 36.6 years. The average amount of VAC application time was 23.4 days. Silver dressing materials were used for 16.8 days. Average wound healing time was 51.9 days. Statistically significant relationship was found between wound size, VAC application time and silver dressing material application time. No complications such as osteomyelitis were found after treatment. Conclusion: VAC technique is recently being used in open fractures with wide skin and soft tissue defects, producing good results. A wide array of dressing materials such as silver dressing is in development. We have incorporated the VAC technique together with silver dressing materials in the treatment of open fractures and achieved complication free results.

• Journal of Chest Surgery
• /
• v.56 no.3
• /
• pp.206-212
• /
• 2023

Background: Delayed sternal closure (DSC) is a useful option for patients with intractable bleeding and hemodynamic instability due to prolonged cardiopulmonary bypass and a preoperative bleeding tendency. Vacuum-assisted closure (VAC) has been widely used for sternal wound problems, but only rarely for DSC, and its efficacy for mediastinal drainage immediately after cardiac surgery has not been well established. Therefore, we evaluated the usefulness of DSC using VAC in adult cardiac surgery. Methods: We analyzed 33 patients who underwent DSC using VAC from January 2017 to July 2022. After packing sterile gauze around the heart surface and great vessels, VAC was applied directly without sternal self-retaining retractors and mediastinal drain tubes. Results: Twenty-one patients (63.6%) underwent emergency surgery for conditions including type A acute aortic dissection (n=13), and 8 patients (24.2%) received postoperative extracorporeal membrane oxygenation support. Intractable bleeding (n=25) was the most common reason for an open sternum. The median duration of open sternum was 2 days (interquartile range [25th-75th pertentiles], 2-3.25 days) and 9 patients underwent VAC application more than once. The overall in-hospital mortality rate was 27.3%. Superficial wound problems occurred in 10 patients (30.3%), and there were no deep sternal wound infections. Conclusion: For patients with an open sternum, VAC alone, which is effective for mediastinal drainage and cardiac decompression, had an acceptable superficial wound infection rate and no deep sternal wound infections. In adult cardiac surgery, DSC using VAC may be useful in patients with intractable bleeding or unstable hemodynamics with myocardial edema.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.26-33
• /
• 1993

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.7 no.2
• /
• pp.137-142
• /
• 2004

Purpose: The resistance of H. pylori to clarithromycin is one of the major causes of eradication failure. In H. pylori, clarithromycin resistance is due to point mutation in 23S rRNA. The aims of this study were to investigate the mutation of 23S rRNA and to examine the association of cagA, vacA genotype and clarithromycin resistant genes. Methods: H. pylori DNA was extracted from antral biopsy specimens from 27 children with H. pylori infection. Specific polymerase chain reaction (PCR) assays were used for cagA and vacA. Mutations associated with clarithromycin resistance were detected by using PCR restriction fragment length polymorphism (RFLP) analysis of 23S rRNA gene. Results: A2143G mutation was detected in one case and A2144G in 4, indicating 18.5% were clarithromycin resistant. Among the total of 27, cagA was present in 25 (93%), vacA s1a/m1 in 6 (22%), s1a/m2 in 3 (11%), s1c/m1 in 16 (59%), and s1c/m2 in 1 (4%). All of the 5 clarithromycin resistant strains were cagA (+), among which 2 were s1a/m1 and 2 were s1c/m1. There was no relation between genotypes and clarithromycin resistant genes. Conclusion: Detection of H. pylori resistance to clarithromycin using PCR RFLP from biopsy specimens might be useful for the selection of antibiotics. Clarithromycin resistant genes are not associated with genotypes of cagA and vacA.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.432-436
• /
• 2009

Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.

• Journal of Adhesion and Interface
• /
• v.2 no.3
• /
• pp.25-32
• /
• 2001

Ethyl cyanoacrylate (ECA) is used as an instant adhesive, and it can be readily polymerized by moisture in air without any initiator and applied for industrial products and ohome use. However, pure ECA monomer is low-viscosity liquid at room temperature that flows into substrate surface. To thicken the instant adhesive, poly(methyl methacylate)(PMMA) is often added in it commercially. Another disadvantage of instant adhesive polymer is its brittleness In this study, functional polymers including PMMA for an additive of ECA were prepared to increase viscosity of the monomer and flexibility of the adhesive atthe same time The additives, P(MMA-VAc-EVE), were synthesized by radical copolymerization of MMA with VAc and EVE having low glass transition temperature (Tg). The additives were added to ECA to get functional instant adhesives. The chemical structures of the additives and ECA polymers were confirmed by $^1H$ NMR and FTIR, and their physical and mechanical properites were also evaluated. The Tg of the obtained additives decreased with increasing the content of VAc or VAc-EVE, indicating more improved flexibility. In addition, functional instant adhesive containing the additives showed higher bonding strength than that of the existing one.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.508-514
• /
• 2009

The purposes of this study were to compare the efficacy of irrigation systems by removing a calcium hydroxide $(Ca(OH)_2)$ paste from the apical third of the root canal and the effect of the patency file. Sixty single rooted human teeth were used in this study. The canals were instrumented by a crown-down manner with .04 taper ProFile to ISO #35. $Ca(OH)_2$ and distilled water were mixed and placed inside the root canals. The teeth were divided into 6 groups according to the root canal irrigation system and the use of patency file as follows: group 1 - conventional method: group 2 - $EndoActivator^{(R)}$: group 3 - $EndoVac^{(R)}$; group 4 - conventional method, patency: group 4 - $EndoActivator^{(R)}$, patency; group 6 - $EndoVac^{(R)}$, patency. All teeth were irrigated with sodium hypochlorite. After the root canal irrigation, the teeth were split in bucco-lingual aspect. Percentage of the root canal surface coverage with residual $Ca(OH)_2$ until 3 mm from working length was analyzed using Image Pro Plus ver. 4.0. Statistical analysis was performed using the One-way ANOVA, t-test and Scheffe's post-hoc test. Conventional groups had significantly more $Ca(OH)_2$ debris than $EndoActivator^{(R)}$, $EndoVac^{(R)}$ groups. There was no significant difference between $EndoActivator^{(R)}$ and $EndoVac^{(R)}$ groups. Groups with patency file showed more effective in removing $Ca(OH)_2$ paste than no patency groups. but. it was no significant difference. This study showed that $EndoActivator^{(R)}$ and $EndoVac^{(R)}$ systems were more effective in removing $Ca(OH)_2$ paste from the apical third of the root canal than conventional method.