• 조명전기설비학회논문지
• /
• 제21권9호
• /
• pp.1-6
• /
• 2007

In this study, tests of brain waves were carried out to investigate the physiological characteristics of drivers during a change of headlight brightness. The participants were 20 males in their 20s. Twenty-three different conditions combining the waveform of light, voltage, and alteration time were used. The measurement of brain waves was performed by an internationally standardized 10-20 method using LXE3232-RF. The results were as follows. 1. From the results of the brain wave map analysis, it was suggested that waveform A increases mental stress and waveform B affects mental and visual stress. The longer the stimulation time, the more stress level was detected. 2. The voltage alteration time of the B waveform should be kept to less than 1500msec, while the voltage should not fall below 11.5[V].

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.414-427
• /
• 2011

본 연구는 컷오프 수준에 따라 활성화 셀(cell) 수와 래더(ladder) 수 등의 통계량의 변화를 살펴보고, 컷오프 수준의 변화에 따른 가치 맵이 어떻게 변화하는지를 제시하며, 주어진 조건(100명의 응답자에게 최대 5개의 중요한 속성을 선택하도록 하여 가치사슬을 만든 후 이를 이용하여 가치 맵을 그렸을 경우)하에서 정보손실을 최소화하면서 설명력이 있는 최적의 컷오프 수준 결정과 이에 따른 가치 맵을 표현하고자 한다.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2697-2701
• /
• 2012

안티퓨즈 MOS 커패시터를 기반으로 제작된 OTP 소자의 수율은 프로그램 과정에서 입력 저항(Rin)값과 통과 트랜지스터(Pass Tr)의 크기, 데이터 읽기 과정에서 읽기 트랜지스터(Read Tr)와 읽기 전압에 영향을 받는다. 따라서 수율에 영향을 주는 요소를 분석하기 위해 여러 가지 실험 조건을 달리하여 각각의 조건에 대해 블로잉 후 실효소자의 저항 특성에 대한 풀 맵(full map) 데이터를 얻어 OTP 소자가 어떻게 동작하는지를 분석하여 수율 개선에 필요한 최적 조건을 연구하였다. 최적 조건은 입력저항이 $50{\Omega}$, 통과 트랜지스터의 W값이 $10{\mu}m$, 읽기 전압이 2.8 V 일 때이다.

• 산업경영시스템학회지
• /
• 제31권2호
• /
• pp.28-35
• /
• 2008

Most organizations have recently put more emphasis on the improvement in service quality. This phenomenon could come from the recognition that service quality plays an essential role in enhancing organization's business performance. Hence this paper presents a framework for improving such service quality. The presented framework involves the methodology for (i) developing service quality indices, (ii) measuring and evaluating service quality, (iii) analyzing the level of service quality, (iv) constructing the quality improvement road map, (v) determining the quality improvement action plan. This methodology is intended to create self-sustaining improvement in service quality from the entire organization's perspective. An illustration is also given.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1912-1914
• /
• 2000

본 논문은 고압 전력기기인 대형모타에 대해 현장에서 정밀 진단한 것으로 주로 6.6/3.3kV급을 대상으로 하였으며, 수백 kW $\sim$ 5MW까지의 용량을 지니고 있는 것으로 현재 수자원공사 각 현장에서 설치 운용되고 있는 설비이다. 진단결과 간이 제조업체, 사용재료 등에 의한 절연간이 다양하게 그리고 넓은 범위로 나타났으며, 판정기법은 IE료El) 기준과 일본 제조업체에서 개발한 Discharge-map를 이용하였으며 '99년까지 100여 개소에 대하여 진단을 실시하였다.

• 천문학회보
• /
• 제36권1호
• /
• pp.88.1-88.1
• /
• 2011

We present the FIMS/SPEAR FUV continuum map of The Taurus - Auriga - Perseus (TPA) complex, which is one of the largest local association of dark clouds located in (l,b)~([152,180],[-28,0]). We also present the result of FUV dust scattering simulation, which is based on Monte Carlo Radiative Transfer(MCRT) technique. Before the simulation we generate the model cloud using Hipparcos 77834 stars and the calculation of their E(B-V). From the density-integrated image and the cross section image of the modeled cloud we confirmed that the Taurus cloud is located in ~130pc. The cloud north of the California nebula is known for its two layered structure and we confirm that using the cross section image of the modeled cloud. In our modeled cloud, that two clouds are located at ~130pc and at ~300pc, respectively. Over the whole region the result image of simulation is well correlated with the diffuse FUV observed with FIMS/SPEAR. The dense core of the Taurus cloud, however, is not revealed completely in the map.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.125-130
• /
• 2006

In this study, tests of brain waves were carried out to investigate the driver's physiological characteristics by the change of the headlight. The participants were 20 men in their 20s and twenty-three different conditions in combinations of waveform of light, voltage, and alteration time were used. The measurement of the brain waves was performed by internationally standardized 10-20 method using LXE3232-RF. The results were analyzed by Power Spectrum Analysis using alpha-, and beta-wave and by the analysis of different brain domains using Brain wave Map. The results were as follows. 1. From the results of the Brain wave Map analysis, it was suggested that A waveform increases mental stress and B waveform affects mental and visual stress. The longer the stimulation time, the more stress level was detected. 2 The voltage alteration time of B waveform should be kept less than 1500msec, and the voltage should not fall below 11.5V.

• Smart Structures and Systems
• /
• 제9권6호
• /
• pp.535-547
• /
• 2012

Controlling the balance of motion in a context involving a biped robot navigating a rugged surface or a step is a difficult task. In the present study, a $3{\times}5$ flexible piezoelectric tactile sensor array is developed to provide a foot pressure map and zero moment point for a biped robot. We introduce an innovative concept involving structural electrodes on a piezoelectric film in order to improve the sensitivity. The tactile sensor consists of a polymer piezoelectric film, PVDF, between two patterned flexible print circuit substrates (FPC). Additionally, a silicon rubber bump-like structure is attached to the FPC and covered by a polydimethylsiloxane (PDMS) layer. Experimental results show that the output signal of the sensor exhibits a linear behavior within 0.2 N ~ 9 N, while its sensitivity is approximately 42 mV/N. According to the characteristic of the tactile sensor, the readout module is designed for an in-situ display of the pressure magnitudes and distribution within $3{\times}5$ taxels. Furthermore, the trajectory of the zero moment point (ZMP) can also be calculated by this program. Consequently, our tactile sensor module can provide the pressure map and ZMP information to the in-situ feedback to control the balance of moment for a biped robot.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권4호
• /
• pp.181-188
• /
• 2022

The purpose of this study is to identify selection attributes, functional benefits, psychological benefits, and values according to crossover shopping patterns (showrooming and webrooming). To achieve objectives of this study, a survey was designed based on the means-end chain theory, using the in-depth laddering technique and APT laddering technique which understanding the linkage of A(attributes)-FB(functional benefits)-PB(psychological benefit)-V(value). These two laddering techniques were used to construct a hierarchical value map (HVM) by linking selection attributes, functional benefits, psychological benefits, and value levels. The selection attribute items that showrooming shoppers consider important are 'price conformity', 'product information', 'product variety', and 'delivery service'. Functional benefit items were 'free purchase', 'economic benefit', 'communication', 'safety', and 'accurate Information', and psychological benefit items were 'convenience', 'relaxation', 'pleasure', 'rational consumption', and 'stability'. Finally, the value items were 'self-satisfaction', 'abundant life', 'achievement', 'happiness', and 'reasonable life'. Next, the selection attribute items that webrooming shoppers consider important are 'price conformity', 'product information', 'product variety', 'AS', 'shopping atmosphere', and 'seller service'. Functional benefit items were 'free purchase', 'economic profit', 'expression opinion', 'safety', and 'accurate information', and psychological benefit items were 'convenience', 'relaxation', 'rational consumption', and 'stability'. Finally, the value items were 'self-satisfaction', 'abundant life', 'happiness', and 'reasonable life'.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권12호
• /
• pp.1703-1709
• /
• 2008

As genetic markers, single nucleotide polymorphisms (SNP) are very appropriate for the development of genetic tests for economic traits in livestock. Several microsatellite markers have been identified as useful markers for the genetic improvement of Hanwoo. Among those markers, ILSTS035 was recently mapped at a similar position with four SNPs (AH1_11, AH1_9, 31465_446, and 12273_165) in a linkage map of EST-based SNP in BAT6. Among the four SNPs, two SNPs (31465_446 and 12273_165) were analyzed using BLAST at the NCBI web site. The sequences including the 12273_165 SNP were identified at the intron region within the LOC534614 gene on the gene sequence map (Bos taurus NCBI Map view, build 3.1). The LOC534614 gene represents a protein similar to myosin heavy chain, fat skeletal muscle, embryonic isoform 1 in the dog, and myosin_1 (Myosin heavy chain D) in Macaca mulatta. In cattle, the myosin heavy chain was associated with muscle development. The phenotypic data for growth and carcass traits in the 415 animals were analyzed by the mixed ANCOVA (analysis of covariance) linear model using PROC GLM module in SAS v9.1. By the genotyping of Hanwoo individuals (n = 415) to evaluate the association of SNP with growth and carcass traits, it was shown that the 12273_165 SNP region within LOC534614 may be a candidate marker for growth. The results of the statistical analyses suggested that the genotype of the 12273_165 SNP significantly affected birth weight, weight of the cattle at 24 months of age, average daily gain and carcass cold weight (p<0.05). Consequently, the 12273_165 SNP polymorphisms at the LOC534614 gene may be associated with growth in Hanwoo, and functional validation of polymorphisms in LOC534614 should be performed in the future.