• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1890-1899
• /
• 1992

본 연구에서는 이종재료간의 Ⅴ-노치균열의 노치각도 및 재료의 종류에 따른 응력특이성지수와 응력강도 계수 해석에 각각 뉴톤-랍슨법(newtonraphson method), 뉴톤-랍슨법과 최소자승법을 이용한 선점법(collocation method)인 수치해석적 방법을 응용하고, 광탄성 등색선 무늬를 컴퓨터 그래픽하여 응력특이성지수와 응력강도계수가 모우드(mode)에 미치는 특성과 경계요소법(boundary element method)으로 응력해석한 결과로써 선점법을 이용하여 응력강도계수를 해석하고 기존의 결과등과 비교, 검토하 고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.747-750
• /
• 1997

Using complex potentials and the concept of repeated roots for general solutions, logarithmic stress singularities and coefficient vectors for v-notched cracks in isotropic dissimilar materials are evaluated and demonstrated to have no influence on the logarithmic stress singularities.

• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.159-165
• /
• 2003

Most engineers interested in stress singularities have focused mainly on the research of power stress singularities for v-notched cracks in dissimilar materials. The logarithmic stress singularity was discussed a little in Bogy's paper. The power-logarithmic stress singularity was reported by Dempsey and Sinclair. It was indicated that the logarithmic singularity is only a special case of power-logarithmic stress singularities. Then, Dempsey reported specific cases which have power-logarithmic singularities even fur homogeneous boundary conditions. It was known that logarithmic stress singularities for v-notched cracks in dissimilar materials occurs when the surfaces of a v-notched crack have constant tractions. In this paper, using the complex potential method, the stresses and displacements having logarithmic stress singularities were obtained and the coefficients vectors were calculated by a numerical program code: Mathematica. It was shown that our analysis models don't have logarithmic stress singularities under the constant tractions, although the coefficient vectors are existing.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.152-163
• /
• 1999

The problem of eigenvalue and eigenvector for v-notched cracks in pseudo-isotropic and anisotropic dissimilar materials was obtained to discuss stress singularities from traction free boundary and perfect bonded interface conditions assuming like the form of complex stress function for v-notched cracks in an isotropic material. Eigenvalues were solved by a commercial numerical program, MATHEMATICA. The relation between wedged angle and material property for eigenvalue, ${\lambda}$ indicating stress singularities of v-notched cracks in pseudo-isotropic and anisotropic dissimilar materials was examined.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.88-94
• /
• 2001

The V-notched crack problem in dissimilar materials can be formulated as an eigenvalue problem. The RWCIM(Reciprocal Work Contour Integral Method) is applied to the determination of the eigenvector coefficients associated with eigenvalues for V-notched cracks in pseudo-isotropic and anisotropic dissimilar materials. The RWCIM algorithm is programed by the commercial numerical program, MATHEMATICA. The numerical results obtained are shown that the RWCIM is a useful method for determining the eigenvector coefficients of V-notched cracks in pseudo-isotropic and anisotropic dissimilar materials.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.22-32
• /
• 2002

V-notched crack problems can be formulated as eigenvalue problems. The problem ova v-notched crack in anisotropic and/or pseudo-isotropic dissimilar materials was formulated as an eigenvalue problem to discuss stress singularities. The eigenvalue problem was served by the commercial numerical program; MATHEMATICA. The specific data of eigenvalues possessing the stress singularity were obtained. Stress singularities fur v-notched cracks in anisotropic and/or pseudo-isotropic dissimilar materials were discussed according to the relation between wedge angle and material property. It was shown that there are three cases of eigenvalues possessing the stress singularity; one real, two real and one complex.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.347-350
• /
• 2003

The metal forming behavior and defect formation in Ti-6Al-4V tube during hot backward extrusion were investigated. To predict the forming-defects such as shear band, inner cracks or surface cracks, dynamic material model(DMM) including Ziegler's instability criterion and modified Cockcroft-Latham fracture criterion(C-L model) were used. These models were coupled to the internal variables generated from FE analysis. The chilling effect and friction indicated a great influence on the deformation mode of the tube and the formation of surface cracks. The simulation results for the backward extrusion were compared with the experimental observations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.405-408
• /
• 2009

Edge cracks in cold rolling always influence to the quality of productions, while the "V" shaped cracks were propagated by passing the roll gap. We set up the sizes and shapes of initial cracks in simulation according to the references from real productions. Different to in hot rolling, the cracks in cold rolling couldn't be reduced from propagation automatically after generated, even if these could be reduced by changing the process parameters. In this paper, we described the affections of process parameters on the propagation of edge cracks, such as reduction ratio and tension. We predicted that the dependence of the cracks propagations of changing of process conditions and expected to gain the smaller edge cracks. By raising the reduction ratio, the cracks were propagated increasingly in both transverse and rolling directions. And as tension raise, the cracks became propagated in both directions in which transverse direction was less effectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.115-120
• /
• 2000

This paper examines that it is possible to apply RWCIM for determining eigenvector coefficients associated with eigenvalues for V-notched cracks in anisotropic dissimilar materials using the complex stress function. To verify the RWCIM algorithm, two tests will be shown. First it is performed to ascertain whether predicted coefficients associated with eigenvectors is obtained exactly. Second, it makes an examination of the state of stress for FEM and RWCIM according to a number of eigenvectors at a location far away from the V-notched crack tip.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1368-1375
• /
• 2001

This paper examines that it is possible to apply RWCIM for determining eigenvector coefficients associated with eigenvalues for V-notched cracks in anisotropic dissimilar materials using the complex stress function. To verify the RWCIM algorithm, two tests will be shown. First, it is performed to ascertain whether predicted coefficients associated with eigenvectors are obtained exactly. Second, it makes an examination of the state of stresses for FEM and RWCIM according to a number of eigenvectors at a location far away from the v-notched crack tip.