• 제목/요약/키워드: V-DMC

검색결과 19건 처리시간 0.018초

Human body model electrostatic discharge tester using metal oxide semiconductor-controlled thyristors

  • Dong Yun Jung;Kun Sik Park;Sang In Kim;Sungkyu Kwon;Doo Hyung Cho;Hyun Gyu Jang;Jongil Won;Jong-Won Lim
    • ETRI Journal
    • /
    • 제45권3호
    • /
    • pp.543-550
    • /
    • 2023
  • Electrostatic discharge (ESD) testing for human body model tests is an essential part of the reliability evaluation of electronic/electrical devices and components. However, global environmental concerns have called for the need to replace the mercury-wetted relay switches, which have been used in ESD testers. Therefore, herein, we propose an ESD tester using metal oxide semiconductor-controlled thyristor (MCT) devices with a significantly higher rising rate of anode current (di/dt) characteristics. These MCTs, which have a breakdown voltage beyond 3000 V, were developed through an in-house foundry. As a replacement for the existing mercury relays, the proposed ESD tester with the developed MCT satisfies all the requirements stipulated in the JS-001 standard for conditions at or below 2000 V. Moreover, unlike traditional relays, the proposed ESD tester does not generate resonance; therefore, no additional circuitry is required for resonant removal. To the best of our knowledge, the proposed ESD tester is the first study to meet the JS-001 specification by applying a new switch instead of an existing mercury-wetted relay.

비수용성 전해질내 리튬이온전지용 집전체의 전기화학적 특성 연구: I. Al 집전체 (Electrochemical Studies of Lithium Ion Battery Current Collector in the Aprotic Electrolytes: I. Al Current Collector)

  • 박희구
    • 공업화학
    • /
    • 제10권4호
    • /
    • pp.620-627
    • /
    • 1999
  • 리튬이온전지용 Al 집전체와 비수용성 전해질의 전기화학적 특성을 연구하기 위하여 1 M $LiBF_4$ EC : DMC, 1 M $LiBF_4$ EC : EMC. 1 M $LiPF_6$ EC : DMC. 1 M $LiPF_6$ EC : EMC의 4가지 전해질에서 전압전류 및 임피던스 특성을 조사하였다. Al 집전체는 비교적 넓은 전위창(0.5~4.1 V)에서 안전하지만, 첫 싸이클의 저 전위에서(<2.0 V vs. $Li/Li^{+}$)에서 전해질 내 미량 존재하는 불순물($H_2O$, $O_2$ 등)과 반응하여 계면물질을 생성하며, 리튬염 및 유기용매 또한 일정 전위 범위(<1.5 V vs. $Li/Li^{+}$)에서 Al 집전체와 반응하였다. 특히 전해질내 존재하는 미량의 불순물로 인하여 고 전위에 노출된 Al 집전체의 국부부식이 진행되었다.

  • PDF

리튬이온전지의 유기용매분해에 따른 SEI film 형성과 전기화학적 거동에 관한 연구 (A study on the SEI film formation as organic solvent decomposition of lithium ion batteries and its electrochemical behavior)

  • 김민성;구할본
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
    • /
    • pp.545-549
    • /
    • 2001
  • We have produced electrolyte solution out of 1.15M $LiPF_6$ EC/EMC/DEC/PC(30/55/10/5 by vol%) as a reference, and at the same time, performed basic physical property test using a single solvent of 1.15M $LiPF_6$ DEC, DMC, EMC and a 2 component electrolyte solution of 1.15M $LiPF_6$ EC/DEC(1/2 by vol%) and PC/DEC(1/2 by vol%). Cyclic Voltammetry Analysis showed that, compared to existing carbonate organic solvent, the addition of DEC,DMC and EMC brought the de-decomposition peak of salt anion of $PF_6$ and the solvent at lower oxidization potential of 2.3V, 0.7V and 2.1V(vs. $Li/Li^+$). In addition, a kinetics current peak, in which intercalation of Lt is proceeded at 750mV, 450mV(vs. $Li/Li^+$), was confirmed. These findings suggest that the DEC solvent decomposition occurred at an electric potential lower than that of oxidization of existing carbonate organic solvent. Through the impedance analysis, we checked electric charge transfer resistance($R_{ct}$) according to the electric potential of $Li^+$ intercalation at 750mV(vs. $Li/Li^+$), which was the same as the resistance ($R_f$) and cyclic voltammetry of SEI film that was formed at Reference. By doing so, we found that the significant decrease of polarization resistance($R_p$) when Reference was played a part in the formation of compact SEI layer at the initial decomposition reaction.

  • PDF

Gamma-butyroloctone(GBL)을 첨가한 유기계 전해액의 고전압용 전기화학 커패시터로의 응용 (Organic Electrolyte of the Additive the Gamma-Butyroloctone (GBL) for Additive Material Application to High Voltage Electrochemical Capacitor)

  • 유선경;박수길
    • 전기화학회지
    • /
    • 제20권1호
    • /
    • pp.13-17
    • /
    • 2017
  • 본 연구에서는 고전압용 전기화학 커패시터에 응용을 위한 유기 전해액 개발에 관한 연구를 실시하였다. 사용한 기준 전해액으로는 1M의 $SBPBF_4$염이 포함된 EC:DMC(1:1) 복합 전해액을 사용하였으며, 고전압 안정성을 위해 기준 전해액에 첨가제 GBL을 5 wt.% 첨가했다. 0-3.5 V 전압 범위에서 초기 250 사이클까지의 효율이 약 2.5배 향상된 것을 확인할 수 있었으며, 2000 사이클 이후에는 약 3배 이상의 커패시턴스 효율이 유지되는 것을 확인하였다. 고전압에서 GBL이 전해액 보다 먼저 분해를 일으켜 전해액이 분해되는 현상을 억제하며 안정성을 향상시키는 효과가 있는 것으로 판단된다. 또한 분해된 GBL이 전극 표면에 흡착하여 안정한 SEI 층을 형성해줌으로서, 전극 표면을 보호하여 전해질과의 부반응을 억제해주는 역할을 하는 것으로 판단된다.

Enhancement of Electrolyte Properties for High Energy Density Supercapacitors by using Additive Materials

  • Kim, Cheong;Habazaki, Hiroki;Park, Soo Gil
    • Journal of Electrochemical Science and Technology
    • /
    • 제7권3호
    • /
    • pp.214-217
    • /
    • 2016
  • In this study, we studied the enhancement of the energy densities of electrochemical capacitors by improving the working voltage range of the electrolyte. To prevent the decomposition of the electrolyte, stable SEI layers were formed by reductive degradation of additive materials such as fluoro-ethylene carbonate (FEC) and vinyl ethylene carbonate (VEC) before degradation of the base electrolyte. As a result, the solution resistance (Rs) of EC:DMC + SL 20 % + VEC 1 % electrolytes observed 1.47 Ω and the charge transfer resistance (Rct) was 2.64 Ω at the open circuit voltage. Additionally, a cycle retention of 94 % was observed for EC:DMC + SL 20 % + VEC 1 % after 500 cycles at 3.5 V.

V-PCC 기반 고밀도 동적 메쉬 데이터 압축 방법 (Dynamic dense mesh data compression method based on V-PCC)

  • 변주형;박한제;심동규
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2021년도 추계학술대회
    • /
    • pp.23-26
    • /
    • 2021
  • 본 논문에서는 동적 포인트 클라우드 압축 표준인 V-PCC 을 기반으로 고밀도 동적 메쉬 데이터를 압축하는 방법을 제안한다. 제안하는 방법은 정점마다 색상 값을 갖는 고밀도 동적 메쉬 데이터 압축 구조로 정점마다 갖는 위치 정보와 색상정보는 V-PCC 를 통해 압축을 수행하고 정점들의 연결정보는 TFAN 기술을 통해 압축을 수행한다. 이때 V-PCC 를 통해 복원된 정점의 순서와 TFAN 을 통해 복원된 연결정보의 정점 인덱스 정보는 복원 후 변경되어 둘 사이를 매핑 해주기 위한 방법이 필요하다. 본 논문에서는 부호화기에서 3D morton 코드 기반으로 원본 정점과 V-PCC 를 통해 복원된 정점을 효과적으로 매핑하는 방법을 제안한다. 제안하는 메쉬 압축 방법은 기존 MPEG-4 의정적 메쉬 데이터 압축 표준인 SC3DMC 와의 비교를 통해 V-PCC 기반 동적 메쉬 데이터 압축의 효율성을 보인다.

  • PDF

리튬이온전지의 유기용매분해에 따른 SEI film형성과 전기화학적 거동에 관한 연구 (A study on the SEI film formation as organic solvent decomposition of lithium ion batteries and its electrochemical behavior)

  • 김민성;구할본
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 추계학술대회 논문집
    • /
    • pp.545-549
    • /
    • 2001
  • We have produced electrolyte solution out of 1.15M LiPF$\sub$6/ EC/EMC/DEC/PC(30/55/10/5 by vol%) as a reference, and at the same time, performed basic physical property test using a single solvent of 1.15M LiPF$\sub$6/DEC, DMC, EMC and a 2 component electrolyte solution of 1.15M LiPF$\sub$6/ EC/DEC(1/2 by vo%%) and PC/DEC(1/2 by vol%). Cyclic Voltammetry Analysis showed that, compared to existing carbonate organic solvent, the addition of DEC, DMC and EMC brought the de-decomposition peak of salt anion of PF$\sub$6/$\^$-/ and the solvent at lower oxidization potential of 2.3V, 0.7V and 2.1V(vs. Li/Li$\^$+/\`). In addition, a kinetics current peak, in which intercalation of Li$\^$+/ is proceeded at 750mv, 450mv(vs. Li/Li$\^$+/), was confirmed. These findings suggest that the DEC solvent decomposition occurred at an electric potential lower than that of oxidization of existing carbonate organic solvent. Through the impedance analysis, we checked electric charge transfer resistance(R$\sub$ct/) according to the electric potential of Li$\^$+/ intercalation at 750mv(vs. Li/Li$\^$+/), which was the same as the resistance (R$\sub$f/) and cyclic voltammetry of SEI film that was formed at Reference. By doing so, we found that the significant decrease of polarization resistance(R$\sub$p/) when Reference was played a part in the formation of compact SEI layer at the initial decomposition reaction.

  • PDF

스케일러블 동적 메쉬 압축을 위한 SHVC 기반 텍스처 맵 부호화 방법 (SHVC-based Texture Map Coding for Scalable Dynamic Mesh Compression)

  • 권나성;변주형;최한솔;심동규
    • 방송공학회논문지
    • /
    • 제28권3호
    • /
    • pp.314-328
    • /
    • 2023
  • 본 논문에서는 동적 메쉬 부/복호화 시 스케일러빌리티 기능을 지원하기 위해 SHVC의 계층적 부호화 방식을 기반으로 텍스처 맵을 압축하는 방법을 제안한다. 제안하는 방법은 고해상도 텍스처 맵을 다운샘플링하여 다해상도의 텍스처 맵을 생성하고 이를 SHVC로 부호화함으로써 효과적으로 다해상도 텍스처 맵들의 중복성을 제거한다. 동적 메쉬 복호화기에서는 수신기 성능, 네트워크 환경 등에 따라 적합한 해상도의 텍스처 맵을 복호화하여 메쉬 데이터의 스케일러빌리티를 지원할 수 있도록 한다. 제안하는 방법의 성능을 검증하기 위해 V-DMC (Video-based Dynamic Mesh Coding) 참조 소프트웨어인 TMMv1.0에 제안하는 방법을 적용하고 본 논문에서 제안하는 스케일러블 부/복호화기와 TMMv1.0 기반의 시뮬캐스트 방식의 성능을 비교하였다. 제안하는 방법은 시뮬캐스트 방법 대비 AI, LD 환경에서 Luma BD-rate (Luma PSNR)가 각각 평균 -7.7%, -5.7%의 향상된 결과를 얻어 제안하는 방법을 통해 효과적으로 동적 메쉬 데이터의 텍스처 맵 스케일러빌리티 지원이 가능함을 확인하였다.

고전압 구동 Li2MnO3-LiMO2(M=Ni, Co, Mn)/graphite 시스템에서의 전지 수명 및 고온 방치 특성 향상에 효과적인 플루오로 화합물계 전해액에 대한 연구 (Improved Cycle Life and Storage Performance in High-Voltage Operated Li2MnO3-LiMO2(M=Ni, Co, Mn)/Graphite Cell System by Fluorine Compounds as Main Electrolyte Solvent)

  • 유정이;신우철;이병곤
    • 전기화학회지
    • /
    • 제16권3호
    • /
    • pp.162-168
    • /
    • 2013
  • $Li_2MnO_3-LiMO_2$(M=Ni, Co, Mn) 나노 복합체는 높은 이론 용량을 가지고 있어 전기 자동차용 2차 전지 활물질 재료로 많은 연구가 진행되고 있다. 하지만 $Li_2MnO_3-LiMO_2$(M=Ni, Co, Mn)로부터 250 mAh/g 이상의 용량을 구현하기 위해서는 4.4 V 이상의 구동전압이 필요하며, 이러한 높은 구동 전압은 전지의 수명 및 고온 방치 특성의 저해 요소로 작용하고 있다. 본 연구에서는 이러한 문제점을 개선하기 위해서 FEC (Fluoroethylene carbonate), 플루오로알킬 에테르, $LiPF_6$가 주성분인 신규 전해액(F-based EL)을 설계하였다. F-based EL은 1.3 M $LiPF_6$ EC/EMC/DMC (3/4/3, v/v/v) (STD) 대비 안정한 SEI를 형성하며, 산화 안정성이 뛰어나 $Li_2MnO_3-LiMO_2$(M=Ni, Co, Mn)/graphite 셀의 수명 및 방치 중 가스 저감에 효과가 있음을 확인할 수 있었다.

구리-바나듐 산화물 박막의 양극 특성 및 전 고상 전지의 제작 (Characteristics of Copper Vanadium Oxide$(Cu_{0.5}V_2O_5)$ Cathode for Thin Film Microbattery)

  • 임영창;남상철;박호영;윤영수;조원일;조병원;전해수;윤경석
    • 전기화학회지
    • /
    • 제3권4호
    • /
    • pp.219-223
    • /
    • 2000
  • 구리-바나듐 산화물 양극을 이용하여 $(Cu_{0.5}V_2O_5)$으로 구성된 전 고상의 리튬이차박막전지를 제작하였다. 구리-바나듐 산화물 박막은 reactive DC magnetron sputtering을 이용하여 co-sputtering에 의해 제조하였고 Lipon고체전해질은 순수한 질소 분위기 하에서 RF 스퍼터링으로 제조하였다. XRD분석을 통해 구리-바나듐 산화물 박막이 비정질임을 확인하였고, EC:DMC(1:1 in IM $LiPF_5$)액체전해질을 사용한 반전지 구조에서 그 전기화학적 특성을 고찰하였다. Lipon고체전해질의 이온전도도는 $25^{\circ}C$에서 $1.02\times10^{-6}S/cm$를 나타내었고 전고상 박막전지는 $1.5V\~3.6V$의 전압구간, $50{\mu}A/cm^2$의 전류밀도에서 500싸이클까지 약 $50{\mu}Ah/cm^2{\mu}m$의 방전용량을 유지하였다