• Journal of the Korean Society of Tobacco Science
• /
• v.37 no.1
• /
• pp.8-17
• /
• 2015

The purpose of this study is to classify the tobacco names in the world, to investigate the regional distribution of the classified type, and to show origin of names according to the type. The names of tobacco used in this study was 50. The type of tobacco names was classified by the presence or absence of nasal sound(morn) on the first syllable, the Number of syllable, and the structure of consonants and vowels of tobacco names. Type I (Dambago) has the nasal sound on the first syllable. The proportion of Type I(Dambago) was 28%. And the rest(Type I~Type V ; 72%) has no nasal sound. Type II(Tabaco) has three syllables, and its proportion was 20%. Type III(Tabac) has the two syllables and the structure of T+vowels+B+vowels. And its proportion was 30%. Type IV(Tutun) has the two syllables and the structure of T+vowels+T+vowels. And its proportion was 12%. Type V(Duhan) has the two syllables and the structure of D+vowels+H(V)+vowels. And its proportion was 10%. The world's most widely distributed type was Type I(Dambago). regional distribution of the world's tobacco names were clustered by the type. 72% of Type I(Dambago) was distributed in Asia. The etymology of Type I(Dambago) was only 14% Tambaku and the other is not yet known. The etymology of Type I(Dambago) seems to be derived from the Haitian Tambaku(meaning a tobacco pipe). 88% of Type II(Tabaco) and III(Tabac) were distributed in Europe. The etymology of Type II(Tabaco) and Type III(Tabac) were 84% Spanish "Tabaco". 100% of Type IV(Tutun) and V(Duhan) were distributed in Europe. The etymology of Type IV(Tutun) and Type V(Duhan) were 100% Turkish tutun and duhan, respectively. This finding suggests that the etymology of Type I(Dambago) is certainly may be Haitian "Tambaku(meaning a tobacco pipe)".

• The Journal of Korean Physical Therapy
• /
• v.18 no.3
• /
• pp.37-45
• /
• 2006

Purpose: This study analyzed changes in spinal neuron and action potential of motor unit depending on voluntary contraction on spinal neuron adaptation. Methods: It selected 80 university students in their twenties and divided into experimental groups of 25% MVIC (I), 50% MVIC (II), 75% MVIC (III) and 100% MVIC (IV) depending on maximum voluntary isometric contraction (MVIC) and performed isometric exercise of plantar flexor muscle to each experimental group with given contraction for 20 times. It measured Mmax, H/Mmax, Hmax latency, V/Mmax, V wave latency before and after exercise, compared method and volume of contraction. Results: H/Mmax ratio showed significant difference in comparison among groups (p<0.01) and there was difference in I and IV groups. V/Mmax ratio showed significant difference in comparison among experimental groups (p<0.05) and there was difference in I and IV groups. When voluntary contraction level was maximum, changes were greatest. However, no significantly difference was to Mmax, H latency and V wave latency. Conclusion: These results suggest that amplitude changes of voluntary contraction level, spinal neuron and supra-spinal neuron had a dose connection that the more contraction level, the better central activation seem to decrease highly for a short time.

• Journal of Technologic Dentistry
• /
• v.11 no.1
• /
• pp.103-109
• /
• 1989

Bond strength between alloy and ceramic plays an important role in deciding the quaring the processing of metalceramic restorations. Now the author had an experiment on the measurement of bond strength differences accoding to the contents of recast alloy used during the processing of metal-ceramic restorations. In the experiment, Anusavice's Planar Interface Shear Bond Test was employed to determine the bond strength. Total 25 specimens were divided as 5 groups, that is, 5 specimens in a group respections : Group I (new alloy 100%) Group II (new 75%$\cdot$recast 25%), Group III (new 50%$\cdot$recast 50%), Group IV (new 25%$\cdot$recast 75%), Group V(recast 100%). All specimens examined micropically and respective strength values of the group specimens were checked simultaneously. The results were as follows, 1. In the analtsis of variance the result showed the significant differences of 1%(P<0.01) among the each group classifid according to the recast contents. 2. When the interfaces of specimens were examined with an electron microscope, the air bubble were evenly occurred in all the specimens, and the occurrence frequencies and the sizes of air bubble were different between Group I and Group III, especially marked different Group I and Croup V. 3. In respective verification of each group through T-test, between Group I and Group II, between Group I and Group III did not show significant differences. 4. There was significant difference between Group I and Group IV, between Group I and Group V as 1%(P<0.01). 5. In the Shear Bond Test of all the groups, Croup V showed the lowest value. Explanatoion of Figures Fig 1. Main fracture type of metal-porcelain interlace showed in group I, II, III from shear Bond Test resets. Fig 2. Main fracture type of metal-porcelain interface showed In group Ⅳ, Ⅴ form shear Bond Test resets. Air bubble and their size appeared around interface of metal-porcelain. Fig 3. Group I, Fig 4. Group II Fig 5. Group III, Fig 6. Group IV, Fig 7. Group V.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.151-163
• /
• 1983

This study was conducted to investigate the responses to photoperiod of some Korean rice cultivars at four levels of the day length, 10, 12, 14 and 16 hours. Generally the days to heading were reduced in the short day length. Japonica varieties seemed to have shorter basic vegetative growth phase and, were more sensitive to day length, while Japonica crossed Indica varieties showed longer basic vegetative growth phase and, were less sensitive to day length. All tested varieties could be classified into 19 ecotypes based on the periods of the basic vegetative growth phase and the sensitivity to day length.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.4
• /
• pp.4533-4543
• /
• 1977

The purpose of this study was to investigate and compare flow discharges of rectangular, V-notch and trapezoidal type of cutthrooat flumes, and the published data for trapezoidal parshall flumes. And the trapezoidal cutthroat flumes were also compared in their accuracy of discharge measurements for various convergence ratios in the inlet section and divergence ratios in the outlet section. Five flumes were studied, and all the flumes were 45cm long with flat-bottom and were made of well-finished transparent acryl plate of 3mm thickness. One rectangular, one V-notch and three trapezoidal types were numbered 1 to 5 as shown in Fig. III-1. The measured depth of water was ranged from 5 to 20cm. The results obtained in this study are summarized as follows: 1. The general discharge equations for tested prototypes are listed for free flow in Table IV-1 and for submergence flow in Table IV-4. 2. In both free and submerged flow, the accuracy of the discharge formula obtained by this test is highly significant at 1% level as shown in Table IV-2 and Table IV-6. The accuracy of disharges measured depends upon the convergence and divergence ratios in the trapezoidal types: the less the ratios of convergence as well as divergence, the lower the accuracy. 3. Submergence ratios tend to increase in the order of flume number except flume No. 4. This implies that trapezoidal cutthroat flumes are more acceptable than rectangular or V-notch ones for free flow. 4. The transition submergence for the trapezoidal Parshall flumes ranges from 80-85 percent, which is slightly higher than the tested flume. However, the trapezoidal cutthroat flume No. 5 has higher transition submergence ratio, ranging from 73-78 percent, than other trapezoidal ones. The difference between the trapezoidal Parshall flumes and the trapezoidal cutthroat flumes in transition submergence seems small enough to be ignored in their field use. 5. Trapezoidal cutthroat flume is simple and economical to construct in existing openchannels whose shapes are generally trapezoidal. In order to obtain the best rating accuracy, flume No. 3 among the tested trapezoidal types is recommended, because it shows the highest accuracy for both free and submerged flow.

• Journal of Environmental Policy
• /
• v.9 no.2
• /
• pp.3-19
• /
• 2010

Anyang-cheon(stream) runs through southern metropolitan area of Seoul to Han-river in Korea. Due to fast growth of Seoul, the water quality and quantity problems in Anyang-cheon have occurred. To cope with the problems, the Integrated Watershed Management program for Anyang-cheon was adopted and a KRW 26.1 billion (USD 21.8 million) pilot project (construction of 4 facilities such as reservoir) is suggested for 4 sub-watersheds of Anyang-cheon, which cost will be shared by the 12 local governments (LG). Three cost division schemes are compared. By Scheme 1, if the cost is borne by the LG in a watershed where the facilities are constructed (no cost division scheme), the LG in I is to bear 0.58% of the total construction cost, LG in watershed II 29.54%, LG in IV 0%, LG in V 69.88%. In particular, LG in IV in this scheme bears no cost because no facility is constructed, even though watershed IV is the major beneficiary of the facility construction. Scheme 2 is to share the cost by length of streams in each sub-watershed and the suggested cost share for each sub-watershed is 13.76% by I, 7.34% by II, 45.87% by IV, and 33.03% by V. However, this cost division scheme is fair only under the false assumption that the bargaining powers of group of LGs are identical. To suggest a better and fair division rule, Shapley Value, a cooperative game solution, is used to suggest Scheme 3. In Scheme 3, Shapley Value measures the summation of average marginal contribution of each player in all possible coalitions as cost division scheme and is known to provide a fair division considering bargaining power. In the context of Anyang-cheon, LGs in upper stream have superior bargaining position. The result suggests the cost division is fair under Scheme 3, when the cost shares are 0.29% by I, 14.77% by II, 50% by IV, and 34.94% by V, respectively.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.483-484
• /
• 1986

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.659-665
• /
• 1988

The ${\alpha}_{s1}$-and ${\beta}$-casein were purified by DEAE-cellulose chromatography and digested with alkaline protease from Bacillus subtilis. Bitter fractions from the hydrolyzates were isolated using n-butanol extraction, Sephadex G-25 gel chromatography, and high performance liquid chromatography. Peptide mixtures were separated by reverse-phase octadecyl silica column with linear gradient of 0-80% acetonitrile containing 0.1% trifluoroacetic acid. Major peaks were combined from replicate chromatographies and the bitterness of each peak was evaluated. The bitter-tasting peaks were rechromatograpied until isolated peaks were obtained. Three different bitter peptides(BP-I, BP-II, BP-III) were obtained from the ${\alpha}_{s1}$-casein hydrolyzate. BP-I was eluted at 34% acetonitrile and BP-II, 35%, BP-III, 26%, respectively. Two bitter peptides(BP-IV, BP-V) were isolated from the ${\beta}-casein$ hydrolyzate: BP-IV was eluted at 40% acetonitrile and BP-V, 42%. BP-V was the most hydrophobic peptide in the five bitter peptides. However, BP-I and BP-II tasted more bitter than BP-IV and BP-V.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.442-452
• /
• 2022

The purpose of this study was to compare the mesio-distal and vertical position of impacted maxillary canines on panoramic radiographs with the labio-palatal position of impacted canines and root resorption of adjacent teeth on CBCT (Cone-Beam Computed Tomography). A total of 54 patients with 69 impacted maxillary canines were included in this study. On panoramic radiographs, the mesio-distal (Sector I - V), and vertical position, and angulation of impacted maxillary canines were evaluated. Labio-palatal position and root resorption of adjacent teeth were evaluated on CBCT. Labial impaction of canines was most frequent in panoramic sector I. Impaction within the arch was most frequent in sector I and II. Palatal impaction was most frequent in sector III, IV, and V. Mesially positioned canines on panoramic radiographs tended to be palatally impacted. Most of the root resorption of adjacent teeth occurred in sector III, IV, and V (p < 0.05). Canines with low angulation on panoramic radiographs tended to be palatally impacted and resorb the roots of adjacent teeth. The vertical position of impacted canines on panoramic radiographs was not statistically significant with respect to labio-palatal position and root resorption of adjacent teeth on CBCT. Analysis of the mesio-distal position and angulation of impacted maxillary canines on panoramic radiographs can be used to predict the labio-palatal position of impacted canines and root resorption of adjacent teeth.