• 디지털산업정보학회논문지
• /
• 제17권3호
• /
• pp.17-26
• /
• 2021

Internet of Things is an infrastructure of the interconnected devices. In Internet of Things environment, many smart devices are used in daily life. It requires a new retrieval method using multiple devices. We propose an information retrieval method using both device characteristics and device usage characteristics in multi-device environments. Firstly, information retrieval is performed using a general purpose device. And then, it is performed using dedicated devices. Our method uses both characteristics of the devices and usage characteristics of them. Moreover, it considers queries on the general purpose device. This paper proposes a new retrieval method and describes algorithms. Then, it presents smart home scenarios. Performance evaluation is performed using the scenarios. The evaluation results show higher precision and efficiency than previous researches. The proposed method gets information more accurately and quickly in IOT multiple device environments.

• 한국IT서비스학회지
• /
• 제13권1호
• /
• pp.125-134
• /
• 2014

Device discovery for D2D (device-to-device) communication enables a device to discover other devices in order to initiate communication with them. Devices should perform the discovery phase using a small quantity of radio resource in a short time and be able to reduce the load of the base station. Legacy device discovery schemes have focused on discovering as many target devices as possible. However, it is not appropriate for peer-to-peer D2D communication scenario. Further, synchronization problems are an important issue for discovery signal transmission. This paper proposes a discovery method that one requesting device discovers a specific target for communication. Multiple antenna beamforming is employed for the synchronization between the base station and a target device. The proposal can reduce the load of the base station using the information that it already maintains and improve the reliability of the device discovery because two times of synchronizations using beamforming among the base station and devices can make the exact discovery of a target device with mobility possible.

• 한국컴퓨터정보학회논문지
• /
• 제20권8호
• /
• pp.7-13
• /
• 2015

Recently, there are serviced user customized advertisement of various type using smart device. Representative services are advertisement service using light of smart TV screen or audible sound of smart TV to transmit advertisement information. However, those services have to do a specific action of smart device user for advertisement information or need audible audio information of TV contents. To overcome those weakness, therefore, we propose an advertisement method using inaudible sound of speaker based on smart device. This method supports the transfer of advertising content to the smart device user with no additional action or TV audio signal required to access that content. The proposed method used two high frequencies among 18kHz ~ 22kHz of audible frequency range which smart TV can send out. And it generates those frequencies synthesized with audio of TV contents as trigger signal which can send advertisements to smart device. Next, smart device analysis the trigger signal and request advertisement contents related to the signal to server. After then, smart device can show the downloaded contents to user. Because the proposed method uses the high frequencies of sound signals via the inner speaker of the smart device, its main advantage is that it does not affect the audio signal of TV content. To evaluate the efficacy of the proposed method, we developed an application to implement it and subsequently carried out an advertisement transmission experiment. The success rate of the transmission experiment was approximately 97%. Based on this result, we believe the proposed method will be a useful technique in introducing a customized user advertising service.

• 한국콘텐츠학회논문지
• /
• 제18권7호
• /
• pp.628-634
• /
• 2018

턱관절 디스크 검사 시 MRI는 유용한 검사법으로 디스크의 정확한 위치변화를 관찰하고자 개구상태에서 오랜 시간 검사가 필요하다. 이에 3D프린팅 기술을 이용하여 개구상태를 유지시켜 줄 고정 장치(TMJ device)를 제작하고 이를 기존 고정 장치와 비교하여 유용성을 평가하고자 하였다. 기존 TMJ device를 사용한 영상에 비해 3D 프린터로 자체 제작한 TMJ device를 사용한 영상에서 SNR이 다소 낮은 결과를 보였지만 임상적으로 사용하는데 큰 결함이 없고 환자 개인별 특화된 맞춤형 제작이 가능하고 더불어 3D 프린팅 기술을 활용하여 유사도구 제작에 기여함으로서 비용대비 편익이 상승될 것이라 사료된다.

• 디지털산업정보학회논문지
• /
• 제11권1호
• /
• pp.19-25
• /
• 2015

In this time, as an industrial society developed to a welfare society, more and more people want their quality of lives upgraded and specially customized service by mass production/mass consumption. And it leads to an increase of requiring service. There're active developments and studies on various IT equipment as the requirement made IT devices used in service. In this paper, we try to design and realize radio paging DID by using smart device to be used as a receiver of a radio pager which is broadly used at face to face service. Firstly, we used MCU to design and implement Wireless Calling Gateway which change radio calling signal of ISM band to smart device. A receiver of wireless caller used original receiver module. Also it used bluetooth module to communicate with smart device. It was possible to have satisfactory communication since radio paging signal converter and smart device were linked in 3M. Secondly, to indicate various paging information delivered from a radio pager, we realized DID application program by using Smart PAD. As a result, we could indicate various information compared to an original receiver which only could indicate letters or numeric data. Secondly, we implemented the DID app for wireless calls that can display a variety of information sent from a wireless pager. Was implemented using the Smart Pad. As a result, it is shown that can display a variety of information than the existing receiver.

• 한국멀티미디어학회논문지
• /
• 제25권9호
• /
• pp.1307-1315
• /
• 2022

In this paper, we proposed and developed a new portable skin elasticity measuring device based on the indentation method using piezoelectric effect. The proposed device is designed to minimize the uncertainty caused by the layer structure of the skin when measuring the elasticity of the skin. And, we developed a piezoelectric-based thin-film pressure sensor that can measure quantitatively and quickly during repeated measurement as a device sensor. To confirm the effectiveness of the proposed measuring device, it was compared with the experimental results of the conventional measuring devices under the same experimental conditions, and statistical correlation analysis was performed between the experimental data of the proposed measuring device and the experimental data of the conventional measuring devices. As a result of the correlation analysis, it was confirmed that the proposed measuring device had a high correlation with the conventional measuring devices. Therefore, it was confirmed that the proposed skin elasticity measuring device was effective.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.462-468
• /
• 2009

In this study, a workpiece-chucking device that generates a chucking force from a shape memory alloy is introduced. This paper first presents train procedure to transform a commercial one-way shape memory alloy into a two-way shape memory alloy, which makes unclamping mechanism of the chucking device simpler than that using the one-way shape memory alloy Second, it describes a conceptual design of the workpiece-chucking device using the two-way type shape memory alloy. Third, it presents a prototype and its chucking characteristics, such as time-response of clamping/unclamping operations and a relationship between temperatures and chucking forces. Finally, it describes a mill-machining test conducted with the prototype. The results confirm that the proposed workpiece-chucking device is feasible for micro machine-tools.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권9호
• /
• pp.400-406
• /
• 2003

Efficient electrodes are devised for organic luminescent device(OLED). ITO electrode is treated with $O_2$ plasma. In order to inject hole efficiently, there is proposed the shape of anode that inserted plasma polymerized films as buffer layer between anode and organic layer using thiophene monomer. In the case of device inserted the buffer layer by using the plasma polymerization after $O_2$ plasma processing for ITO transparent electrode, since it forms the stable interface and reduce the moving speed of hole, the recombination of hole and electronic are made in the emitting layer. Therefore it realized the device capability of two times in the aspect of luminous efficiency than the device which do not be inserted the buffer layer. Experiments are limited to the device that has the structure of TPD/$AIq_3$, however, the aforementioned electrodes can similarly applied to the organic luminous device and the Polymer luminous device.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.811-814
• /
• 2007

무선 인터넷과 모바일 단말 제조기술의 발달로 다양한 콘텐츠를 모바일 단말에서 사용할 수 있게 되었다. 각 단말들은 단말에 맞는 콘텐츠를 제공 받기위해 콘텐츠 제공자에게 HTTP 헤더를 이용하여 단말 정보를 제공한다. 그러나 단말 정보 제공을 위한 표준이 없어 서비스망 외부의 콘텐츠를 사용할 때 이동통신사마다 다른 방식으로 단말 정보를 제공한다는 상호운용성의 문제가 있다. 국외에서는 국제 표준기구인 OMA(Open Mobile Alliance)의 UAProf(User Agent Profile)을 사용하여 상호운용성의 문제를 해결하였다. 그러나 국내에서 UAProf을 사용하여 단말 정보를 제공하기에는 MMS(Multimedia Messaging Service)지원 정보, 스마트카드 지원 정보, 외부 저장소 지원 정보 등에 대해 명시되어 있지 않아 완전한 단말정보를 제공할 수 없다. 이에 본 논문에서는 국내 환경의 모바일 단말에 최적화된 콘텐츠를 제공하기 위해 필요한 단말 정보를 표현하는 모바일 단말 정보 표현 언어를 UAProf을 기반으로 설계하였다.

• 전기학회논문지
• /
• 제65권3호
• /
• pp.487-492
• /
• 2016

In this paper, a device for analyzing the pressure distribution during walking was produced by using the pressure sensor on the heel. This device was limited to a frequency band by using the 1st low-pass filter. And an algorithm to analyze the value of the quantity to pressure using a analog to digital converter. It is used by using the threshold voltage of pressure sensor, it is suggested the algorithm. The algorithm is detected the peak which is exceeded the threshold voltage. and thus in accordance, it is detected the number of steps. And the calorie consumption were detected by using it. Also it used an MCU and Bluetooth. And by confirming the data at the LCD of the other MCU, it was to reduce the size of the device. According to this algorithm, it has the advantage that there is no restriction on the activity than when using an imaging device and it is inexpensive than other sensors such as an acceleration sensor or a gyro and it is easy to handle.