• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.35-44
• /
• 2003

This study was conducted to develop proper model for cold storage facility that could of for uniform heat movement and air movement f3r green grocery and improve improper design of the existing container-type cold storage facility. For that reason, new model(dome-type) cold storage facility was developed using 3-D CFD(computational fluid dynamics) simulation. The size was 6m${\times}$6m${\times}$5m. Its size and configuration were same to simulation model. Unit cooler was designed to send cold air in 4 side ways. A dome-type cold storage facility showed uniform distributions of air temperature and velocity because cold air was forced to move down along the ceiling and the wall and then circulated to the unit cooler from the central part of the floor. Dome-type cold storage facility also showed by low wind velocity, below 1 m/s that could minimized cold damage and quality deterioration.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.3 s.49
• /
• pp.1-10
• /
• 2003

This study was aimed to investigate the influence on the vicinity by air pollutant generated from facility of the district heating located in local small town. We selected the seven areas arround the surroundings of facility of the district heating, compared the air quality evaluated before and after operations of the facility, and estimated the diffusion of air pollutant exhausted from the facility using a ISC model. The result was that the concentration of TSP before and after operations of the facility was 89${\sim}$94${\mu}$g/m$^3$,and 72${\sim}$81${\mu}$g/m$^3$, respectively and the latter showed a decline in concentration. Also, there was no relationship between straight distance from the facility of the district heating and the concentration of TSP. This result was applicable to cases of PM-10 and SO$_2$. We also investigated the influence on the air around the neighbored area by air pollutant produced from facility of the district heating using ISCLT3 model. The adding-concentrations of TSP, SO$_2$,NO$_2$, and CO were 0.0019${\sim}$0.00183${\mu}$g/m$^3$, 0.0029${\sim}$0.5648ppb, 0.2924${\sim}$l.9837ppb,and 0.0087${\sim}$0.0590ppb, respectively. It is predicted that each concentration is added to pollutant exhausted from facility of the district heating and is about 1/100${\sim}$1/180,000 of present air quality. This has a tiny influence on general air quality. According to this analysis, the concentration of air pollutant is less effected to pollutants expected by the facility of the district heating than other pollutants emitted from mobil source or industrial complex, and etc.

• Korean Journal of Organic Agriculture
• /
• v.31 no.3
• /
• pp.229-247
• /
• 2023

This study investigates the facility use status of smart farming farmers to improve facility use rate of farmers. To this end, a survey was conducted on smart farming farmers in Jeonnam province, and the main survey contents are as follows: facility use rate, the reasons for low facility use, the perception of the introduction and use of smart farming etc. As a result of the survey, many farmers have introduced smart farming facilities even though they do not have enough use capacity. Thus it is necessary to improve the use capacity of farmers. Second, the average facility use rate of farmers was 65.1%, and 37.5% of respondents did not use even 50% of smart farming facilities. To improve the use rate, education on how to use facilities and continuous consulting support for farmers are needed. And the largest number of farmers perceived the risk like crop damage or facility failure due to poor use of facilities. This means that risk management due to the smart farming facilities is important. Third, farmers answered that rapid and continuous repair service were the most important when using facilities. Thus it is important to foster rear industries such as maintenance companies to stably operate smart farming facilities.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.109-123
• /
• 2002

The purpose of this study construct water-facility Database and to develop its management system using GSIS. We used route system and event table that are data model in GSIS for the construction of water valves on water facility pipe. A water-facility management system using GSIS was developed and was actually applied for the city of Yosu and compared with conventional water-facility management systems in terms of workability, information searching cost, and database management efficiency. The system has also been compared with those of two other local governments in terms of functions, process time, and conveniences. The generalization of the work model for water-facility system was also attempted based on the data collected from three local governments and it was revised by the work model of the wide area water-facility system. The generalized work model in this study was compared with other two local governments' work models. The generalized work model will enable local governments to develop more efficient and economical water-facility management system by GSIS in future.

• Journal of Internet Computing and Services
• /
• v.19 no.6
• /
• pp.21-29
• /
• 2018

In the era of the 4-th industrial revolution, the concept of smart factory is emerging. There are efforts to predict the occurrences of facility errors which have negative effects on the utilization and productivity by using data analysis. Data composed of the situation of a facility error and the type of the error, called the facility error log, is required for the prediction. However, in many manufacturing companies, the types of facility error are not precisely defined and categorized. The worker who operates the facilities writes the type of facility error in the form with unstructured text based on his or her empirical judgement. That makes it impossible to analyze data. Therefore, this paper proposes a framework for constructing a phrase network to support the identification and classification of facility error types by using facility error logs written by operators. Specifically, phrase indicating the types are extracted from text data by using dictionary which classifies terms by their usage. Then, a phrase network is constructed by calculating the similarity between the extracted phrase. The performance of the proposed method was evaluated by using real-world facility error logs. It is expected that the proposed method will contribute to the accurate identification of error types and to the prediction of facility errors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.334-338
• /
• 2000

One of the major drawbacks of the existing facility layout methods is that most of them were developed based on pre-defined cost functions, and therefore fail to cope with the dynamic aspects of modern manufacturing systems. Another drawback is that due to the poor representation capability of the block diagrams, they are not able to convey the sufficient information needed by facility designers. In this paper, a system for solving facility layout problem considering these matters in cellular manufacturing environment is proposed and implemented using GA approach with embedded simulation module and virtual reality technologies.

• The KSFM Journal of Fluid Machinery
• /
• v.9 no.4 s.37
• /
• pp.20-26
• /
• 2006

A cryogenic test facility has been developed to perform inducer and pump tests using liquid nitrogen. Performance tests of a turbopump in the maximum 50ton-thrust class can be performed with cryogenic fluid in the facility which operates at a temperature around -196oC with the rotational speed up to 30,000rpm To verify the reliability of the cryogenic pump test facility, hydraulic performance tests of an inducer were accomplished, and their results were compared with the result from a water test. The results confirm the reliability of the cryogenic test facility, and it is expected to contribute for on-going development of a turbopump for liquid rocket engines.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.259-260
• /
• 2015

In this paper, for deriving core function requirements of facility maintenance using BIM(Building Information Modeling) customized surveys were conducted with 30 facility managers during 6 momths from July 2014. As a result, 19 core function requirements for efficient facility maintenance are drawn. The core of Building facility management function is that opinions of facilities maintenance managers should be fully reflected than that of BIM experts. In the future, the development of maintenance programs based on BIM should be made fully by reflecting the opinions of building facility managers on the basis of this questionnaire survey results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.573-576
• /
• 2004

KARI is achieving the KSLV program according to National Space Technology Development Program. In this paper, the authors are intended to introduce the Integrated Power Plant (abb. IPP) test facility which will be constructed for the variety of tests on KSLV program. IPP test facility refers to comprehensive testing equipment for liquid rocket launch vehicle. Using this facility, KARl can verify the adaptiveness of parts and subsystems for launch vehicle and finally can qualify the system characteristics of launch vehicle doing kinds of test including hot firing test. Using this facility, KARI can simulate the vehicle launching circumstances and it make to predict the performance of launch vehicle when its flight test.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.168-170
• /
• 1995

This paper proposes the circuit of the simple synthetic testing facility using LC resonance circuit. The analyzed results of the circuit which can be useful for the design stage of the testing facility are also shown. EMTP has been used to analyze the circuit. Two cases of short-circuit test results obtained from the simple synthetic testing facility in KERI are shown with the waveforms of current and voltage. The results also indicate that the simple synthetic testing facility using LC resonance circuit can be easily designed and used very usefully for the research and development for the switchgears.