• Journal of Computing Science and Engineering
• /
• v.6 no.1
• /
• pp.60-66
• /
• 2012

It has been proved that information and communication technology (ICT) solutions for personalized health (PHealth) and ambient assisted living (AAL) can support people in their daily life activities. Several solutions have been demonstrated to empower different levels of services through seamless data acquisition and specific users' interaction modalities. Usually services usability and accessibility are handled in the design process and are validated with small users' groups. Moreover, while service design and systems development have been extensively described in literature, service deployment methodologies are not properly addressed and documented. Proper reference guidelines are also missing. The most common methodologies like unified process (UP) or ICONX can cover only the design and the development of PHealth services without a clear description on the following phases such as deployment, service provision and maintenance. These phases present several risks to be taken into account right from the beginning of the implementation of PHealth or AAL services. This paper focuses on the description of a structured methodology to deploy PHealth services and how this process can be supported by integrated software routines and adapting the UP framework in particular the "Transition phase."

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.67-76
• /
• 2017

Along with shortening the life cycle of software utilization and supporting various types of user functions, the importance of software architecture development has been emphasized recently. If a software architecture is developed flexibly and reliably for expansion to support new functionality, it can quickly cope with new market demands. This paper proposes an architecture design method based on design recovery of open source software to reuse the software in the development of sustainable software system. When using open source software to develop a software system based on software architecture, we can develop a software system rapidly and also can improve the reliability of the system because we use the already proven open source software in the development.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2235-2239
• /
• 2003

The aim of this research is to study and develop enabling technologies for home healthcare device with ubiquitous network. The motivation of this paper is to enable healthcare in home, to development the device for smart home health care. To achieve the aim, we must develop the prototype platform based on home gateways, distributed context user interface based on UPnP and support for information sharing with high speed power line communication and mobile infra-structures. And IPv6 is the base technology of this platform. In this paper, we concern that physical health, mental health and medical emergencies is all of home healthcare. With the smart device, we evaluate the connectivity, automatic information extraction and private data exchange and event driven message. The result of this paper is demonstration of smart device for ubiquitous communication in a healthcare application such as patient monitoring device and several information services. In conclusion, home healthcare will support more healthy and easy living for a human.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1869-1875
• /
• 2008

Recently, a direct data-driven synthesis of a proportional integral derivative(PID) controller for a linear time-invariant(LTI) plant was presented in [1]. The authors showed that a complete set of PID controllers achieving robust performance and stability can be calculated directly from frequency response(FR) data without an identified transfer function model. However, it is not convenient to use this method because it requires complicated numerical algorithms to find specific frequencies which are solutions of an identical equation. The method also requires determination of the boundary of the controller's parameters from a finite set of FR data. In this paper, we present the development of a user-friendly Matlab toolbox based on the method in [1]. This toolbox allows us to obtain a complete three-dimensional(3-D) graphical solution of PID controllers that meet multiple design objectives. Several examples are given to demonstrate the use of the toolbox.

• Korean Management Science Review
• /
• v.32 no.4
• /
• pp.175-192
• /
• 2015

Due to the emergence of open innovation driven by development of network service technologies and convergence in ICT service industry, It is necessary for ICT service firms to examine their capabilities for open innovation. The purpose of this paper is to empirically examine determinants affecting open innovation in Korean ICT service industry. In order to analyze, this paper uses logistic and multiple regression models based on survey data of Korean ICT service firms. Estimation results show that external network for collaboration is positive on the technological innovation activity regardless of the innovation type. Specifically, user networks are significant in all types of technology innovation, revealing that it is important to innovation activities of the ICT service firms.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.45-53
• /
• 2003

Based on the 4-compartmental pharmacokinetic model developed in PART1, target-controlled infusion(TCI) pump system was designed and evaluated. The TCI system consists of digital board including microcontroller and digital signal process(DSP), analog board, motor-driven actuator, user friendly interface, power management and controller. It provides two modes according to the drugs: plasma target concentration and effect target concentration. Anaesthetist controls the depth of anaesthesia for patients by adjusting the required concentration to maintain both plasma and effect site in drug concentration. The data estimated in DSP include infusion rate, initial load dose, and rotation number of motor encoder. During TCI operation, plasma concentration. effect site concentration, awaken concentration, context-sensitive decrement time and system error information are displayed in real time. Li-ion battery guarantees above 2 hours without power line failure. For high reliability of the system, two microprocessors were used to perform independent functions for both pharmacokinetic algorithm and motor control strategy.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.3
• /
• pp.62-66
• /
• 2015

The cryostat is designed for the superconducting quadrupole magnets to be used in a heavy-ion accelerator facility. The main accelerator is superconducting linac, which can accelerate a $^{238}U$ beam to 200 MeV/u (Mega electron voltage per nucleon). The cryostat for the magnet employs an innovative design primarily driven by the requirement of the compactness, user-friendliness and reliability. Also, several ancillary requirements such as background field, space restriction due to the beam line and cryostat structure need technical attentions. The development of the cryostat for three quadrupole magnets in the in-flight fragmentation separator is presented in the paper. The concept of cryogenic design is reported and the amount of cryogenic load is estimated by a relevant analysis. The structure of the cryostat to endure the heavy iron yoke including three quadrupole magnets is presented. In addition, the design as well as the performance test of the support link for the cold mass is described.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.68-74
• /
• 1998

In this work, we have been concerned with developing an intelligent mold design system for plastic injection molding on the AutoCAD. We have concentrated on building a viable environment, including a mold parts database and a menu-driven user interface. This provides a more interactive and interface for selection of optimal mold-base and mold parts in mold design system. This work presents a method which allows the designer to select the mold parts and mold-base directly within an AutoCAD environment. It can also automatically generate detailed 3D drawings of the mold parts and mold-base. The system shows its potential capability for future enhancement. Since the system is independent of the data, it could easily be extended to other mold-bases and mold parts. In addition, it can be linked to the molding analysis system by creating subtracted 3-D models.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.84-94
• /
• 1991

In order to achieve high accuracy of teaching and increase productivity using industrial robots in polishing process of dies, an off-line task programming system was developed on IBM-PC/386 under WINDOWS 3.0 operating system. The internal structure and the machematical basis of CAMPoli are described. Surface modeling technique of polishing dies with sculptured surfaces is introduced by poing data interpolation methodology through the use of CL-data transmitted from conventional CAM system. Tool selection, polishing speed, polishing pressure and kinds of tool motions can be determined and selected by user specified polishing variables. Task creation and verification of polishing path via computer graphics simulation of polishing tool can be done by the menu- driven function of CAMPoli system. Post-processing module is attached to generate robot language. Some simulation results are provided as verification means of the system.

• International Journal of Advanced Culture Technology
• /
• v.6 no.3
• /
• pp.105-116
• /
• 2018

As an international company in the automotive industry for years, Sichuan Hyundai has encountered serious difficulties since its entering into China. With huge investment and great ambition to conquer the China commercial vehicle market, successive setbacks have put the company in jeopardy. Design thinking, emphasizing "user-driven innovation" can help to look for effective and possible solutions from a very strong and effective perspective. This thesis first provides a comprehensive look of the economic background of China in order to get a overall understanding of the market. Then the paper did an analysis of Sichuan Hyundai from the perspective of design thinking. By identifying the reliability bias of Sichuan Hyundai, key problems such as the product, advertisement and cultural communication were discussed. With a emphasis on the intuitive thinking, the paper provides some feasible solutions and also implications for the future development.