• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.4
• /
• pp.200-204
• /
• 2014

LPG is used in the home would have to depend on the provider, because there is no method for measuring the capacitance. In addition, by measuring the gas capacities can not be known because of the LPG gas replacement time and requires an alarm for replacement. In this study, and that the gas capacities to the trusted user and the supplier, in order to know when it is time to change to LPG gas by applying a Hall effect sensor developed a gas capacities measurement the valve system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4918-4924
• /
• 2015

In this paper, we consider the capacity improvement of systems exploiting dual-polarized antennas for two-user transmission. To this end, we analyze the upper bounds of ergodic capacities for multicast and unicast data services in the systems, and propose the condition for adjusting the complex cross-polarization discriminations (XPDs) to maximize the ergodic capacities. In addition, we present the adjustment condition of the complex XPDs that can achieve spectral efficiencies close to the maximum ergodic capacities with lower system complexity. Lastly simulation results demonstrate that the systems using the proposed conditions can obtain higher spectral efficiencies than the ones employing different adjustment conditions including the exiting adjustment condition.

• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.173-178
• /
• 2006

In this paper, a channel estimation based on the time-domain windowing and its imperfectness in OFDM-based multiple-antenna transmission systems are analyzed with an emphasis on a preamble design for multi-channel separation, From the computer simulation results, the OFDM-CDMA system applying a space-time-frequency diversity with a full-rate full diversity code can give the diversity of D = 4 and D = 8 for both multi-user cases of maximum user and half user capacities, respectively

• Journal of KIISE:Information Networking
• /
• v.41 no.4
• /
• pp.192-201
• /
• 2014

User scheduling boosts the Multi-User Multi-Input Multi-Output (MU-MIMO) gain by selecting an optimal set of users to increase the 802.11 Wi-Fi system capacities. Many kinds of user scheduling algorithms, however, fail to realize the advantages of MU-MIMO due to formidable Channel State Information (CSI) overhead. In this paper, we propose a user scheduling method considering such CSI exchange overhead and its MAC protocol, called ACE (Active CSI Exchange based User Scheduling for MU-MIMO Transmission). Unlike most proposals, where user scheduling is performed after an Access Point (AP) receives CSI from all users, ACE determines the best user set during the CSI exchange phase. In particular, the AP broadcasts a channel hint about previously scheduled users, and the remaining users actively send CSI reports according to their Effective Channel Gains (ECGs) calculated from the hint. Through trace-driven MATLAB simulations, we prove that the proposed scheme improves the throughput gain significantly.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.10
• /
• pp.61-67
• /
• 2004

The next generation cellular wireless communication systems require high data rate transmissions and large system capacities. In order to meet these requirements, multiple antennas can be used at the base and mobile stations, forming MIMO(Multiple Input Multiple Output) channels. This paper proposes a MIMO SDMA(Space Division Multiple Access) technique with dynamic slot allocation which allows the transmitter to efficiently transmit parallel data streams to each of multiple receivers. The proposed technique can increase system capacities significantly by transmitting a larger number of data streams than conventional MIMO techniques while minimizing the performance degradation due to the beamforming dimension reduction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2154-2172
• /
• 2013

A centralized cognitive radio (CR) network is proposed and its system capacity is studied. The CR network is designed with power control and multi-user scheduling schemes to support best-effort traffics under peak interference power constraints. We provide an analytical framework to quantify its system capacity, taking into account various key factors such as interference constraints, density of primary users, cell radius, the number of CR users, and propagations effects. Furthermore, closed-form formulas are derived for its capacities when only path loss is considered in the channel model. Semi-analytical expressions for the capacities are also given when more realistic channel models that include path loss, shadowing, and small-scale fading are used. The accuracy of the proposed analytical framework is validated by Monte Carlo simulations. Illustrated with a practical example, the provided analytical framework is shown to be useful for the strategic planning of centralized CR networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.39-45
• /
• 2012

This paper investigates the capacity for the secondary user with the primary full duplex relay (FDR) network in spectrum sharing systems. For sharing the spectrum of the primary user, sharing scheme under the various primary network should be investigated. However, the conventional works only consider the point-to-point primary communication system. When the FDR node is used for the primary networks, both primary relay and destination suffer the interference from the secondary transmitter simultaneously. Thus, the strict interference constraint should be considered to share the spectrum of the primary user. Therefore, we investigate the capacity of the secondary user with the primary FDR network under the average and peak received-power constraints. In addition, we analyze the performance degradation by the selection of the worst interference channels to consider interference constraint in this system. Through the numerical results, the capacities of the primary and secondary users under the average received-power is superior to the that under the peak received-power constraint.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2233-2252
• /
• 2018

For the problem of cross-layer joint resource allocation (JRA) in the Long-Term Evolution (LTE)-Advanced standard using carrier aggregation (CA) technology, it is difficult to obtain the optimal resource allocation scheme. This paper proposes a joint resource allocation algorithm based on the weights of user's average quality of experience (JRA-WQOE). In contrast to prevalent algorithms, the proposed method can satisfy the carrier aggregation abilities of different users and consider user fairness. An optimization model is established by considering the user quality of experience (QoE) with the aim of maximizing the total user rate. In this model, user QoE is quantified by the mean opinion score (MOS) model, where the average MOS value of users is defined as the weight factor of the optimization model. The JRA-WQOE algorithm consists of the iteration of two algorithms, a component carrier (CC) and resource block (RB) allocation algorithm called DABC-CCRBA and a subgradient power allocation algorithm called SPA. The former is used to dynamically allocate CC and RB for users with different carrier aggregation capacities, and the latter, which is based on the Lagrangian dual method, is used to optimize the power allocation process. Simulation results showed that the proposed JRA-WQOE algorithm has low computational complexity and fast convergence. Compared with existing algorithms, it affords obvious advantages such as improving the average throughput and fairness to users. With varying numbers of users and signal-to-noise ratios (SNRs), the proposed algorithm achieved higher average QoE values than prevalent algorithms.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.2
• /
• pp.105-125
• /
• 2020

This study attempts to identify the influence factors on the numbers of visitors and reference room users of public libraries through log-log multiple regression models, using the Korean National Libraries Statistical Data 2018. The fact found is summarized as follows; Even though books collection and seating capacities might be the most important factors in attraction of visitors and reference room users to public libraries in the past when the storage and propagation of knowledge and information was the top function of public libraries, very various and compound factors such as cultural or lifetime education programs, library operation, and user activities have an effect on inducing people to visit and use public libraries at present. This means that these days, public libraries are being transformed into some kinds of comprehensive cultural center where software elements such as cultural programs, user education, events, budget, membership, opening days, building style and age, and group activities rather than hardware elements such as books, literature material, and facilities constitute their essential parts in connection with visitor and user induction.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.59-69
• /
• 2001

This study is intended to propose a systematic approach for reliability-based assessment of life cycle cost (LCC) effectiveness and economic efficiency for cost-effective seismic upgrading of existing bridges. The LCC function is expressed as the sum of the upgrading cost and all the discounted life cycle damage costs, which is formulated as a function of the Park-Ang damage index and structural damage probability. The damage costs are expressed in terms of direct damage costs such as repair/replacement costs, human losses and property damage costs, and indirect damage costs such as road user costs and indirect regional economic losses. For dealing with a variety of uncertainties associated with earthquake loads and capacities, a simulation-based reliability approach is used. The SMART-DRAIN-2DX, which is a modified version of the well-known DRAIN-2DX, is extended by incor-porating LCC analysis based on the LCC function developed in the study. Economic efficiencies for optimal seismic upgradings of the continuous PC segmental bridges are assessed using the proposed LCC functions and benefit-cost ratio.