• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.2
• /
• pp.121-126
• /
• 2015

In this research, a tool was developed for the rapid performance of three-dimensional finite element analysis (3D FEA) of a machine tool spindle system made of a shaft and bearings. It runs the FEA with data, such as the bearing stiffness and the coordinates of the points, to define the section of the shaft, bearing positions, and cutting point. developed for the spindle system and then implemented with the tool using an object-oriented programing technique that allows the use of the objects of the CAD system used in this research. Graphic user interfaces were designed for a user to interact with the tool. It provides rapid evaluation of the design of a spindle system, and therefore, it would be helpful to identify a near optimal design of a spindle system based on, say, static stiffness with design changes and, consequently, FEA.

• Journal of Korea Multimedia Society
• /
• v.24 no.3
• /
• pp.494-507
• /
• 2021

As service design becomes more common, various user research methods and tools such as cultural probes and contextual inquiry are being used to grasp the user's experience and needs. These methodologies have the advantage of being able to derive various insights through direct observation and investigation, but have disadvantages in that problems such as time and space constraints, cost occurrence, and delay in the service development process may occur. In addition, it is difficult to conduct actual observations, face-to-face investigations, and interviews due to COVID-19, which has recently spread rapidly around the world. Accordingly, prior to the digitization of cultural probes, I would like to suggest the direction of digital tools. First, after grasping the concept of service design and user research through literature research, the necessity of user research in service design was confirmed. After that, the necessity of digitalizing user research was confirmed by extracting functional elements that could be understood and digitalized about the cultural probes methodology, and analyzing previous studies using existing mobile-based survey techniques. Finally, we confirmed the direction of digital tools through user interviews through cultural probes.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.3
• /
• pp.135-140
• /
• 2008

This paper researched about Development Cutting Tool User Defined Module Based(PMCUDMS) on Simulation that was able to adapt themselves to rapid development of software and hardware to adopt. It is basic research that develops a scheme whereby technic make property. This paper theorized about to realize Cutting Tool User Defined Module Based on Simulation which is developing CNC Software flows from building Windows XP operating system's image that is possible realtime acting and multitasking to correct. And Cutting Tool User Defined Module Based on Simulation component which was consisted of basis OS, NC Code parser, Servo Motor Control, Simulator, Man-Machine Interface.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.172-176
• /
• 2015

In this research, a tool was developed to automate one-dimensional finite element analysis (1D FEA) for design of a machine tool spindle. Based on object-oriented programing, this tool employs the objects of a CAD system to construct a geometric model and then to convert it into the FE model of 1D beams at the workbenches of the CAD system with minimum data to define the spindle such as bearing positions and cross-sections of the shaft. Graphic user interfaces were developed for users to interact with the tool. This tool is helpful in identifying a near optimal design of the spindle with the automation of the FEA process with numerous design changes in minimum time and efforts. It is also expected to allow even design engineers to perform the FEA in search of an optimal design of the machine tool spindle.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.177-182
• /
• 1998

The computer related techniques have been developed rapidly in the field of metal removal industry. The electronic catalog for mechanical elements is one of such developments realized in recent years. As the emergence of the electronic catalogs in the 90s, it breaks the restriction of the traditional catalog and becomes a helpful and efficient tool in the field. In this paper, we develop an electronic catalog for the cutting tools of the Korea Tungsten Co. Ltd. The catalog consists of three parts: a preprocessor for tool selection, a database for tool, and a postprocessor for search result. A preprocessor for tool selection is developed under a user-friendly consideration. A database for tool consists of milling, drilling, and reaming tools with a list of cutters, inserts, and components. A postprocessor for search result consists of weight, dimension. drawing, product order number etc. of the tools. It also suggests the optimized cutting condition of the selected tool using a neural network technique which is done by an independent research group.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.10
• /
• pp.921-927
• /
• 2013

This paper presents a user interface for vision based indirect teaching of a robotic manipulator with Kinect and IMU (Inertial Measurement Unit) sensors. The user interface system is designed to control the manipulator more easily in joint space, Cartesian space and tool frame. We use the skeleton data of the user from Kinect and Wrist-mounted IMU sensors to calculate the user's joint angles and wrist movement for robot control. The interface system proposed in this paper allows the user to teach the manipulator without a pre-programming process. This will improve the teaching time of the robot and eventually enable increased productivity. Simulation and experimental results are presented to verify the performance of the robot control and interface system.

• Composites Research
• /
• v.27 no.6
• /
• pp.231-235
• /
• 2014

Autoclave processing has a good quality of product, but manufacturing cost is expansive. After curing of composite, the unwanted deformation and distortion increase the manufacturing cost by redesign of tool parts. Therefore, manufacturing cost down is a big issue in processing level. For the reduction of tool costs, it is important to investigate the effects of tool materials and tool surface conditions. In this paper, we organized user subroutine in ABAQUS to consider the thermal effects of part and tool, and the results are compared with commercial code, COMPRO. And this paper suggests reference point for the selection of tool materials to reduce manufacturing costs.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.184-186
• /
• 2004

This paper is about vision system that exhibits automatic examination of the conditions of shaft's worm. The system is composed of three part : image acquisition, vision algorithm, and user interface. The image acquisition part is composed of motor control, illumination and optics. The vision algorithm examines the parts by labeling algorithm using shaft image. User interface is divided into two parts, user interface for feature registering with control value settings and user interface for examination operation. The automatic inspection system of this research is a tool for final examination of shaft worm. This tool can be practically used in production lines with simple adjustments.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.115-124
• /
• 1994

In this paper, we have developed a performance analysis tool for communication networks called COMNAS. COMNAS analyses the performance of wide area networks such as Korea Educational Network and Korea Research Environment Open Network which include local area networks such as Ethernet and Token Ring. COMNAS consists of model constructor, simulation implementor, output analyzer and user interface. Attributes of communication networks for modeling either have default values or are entered by user as object units, and implementation of simulation is automatically proceeded by user interface. Ouput results obtained by COMNAS are the status of node, link and entire network such as mean message transmission delay, throughput, utilization, and so on, and they can be selectively obtained upon the request of the user.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1319-1327
• /
• 2007

Clothing color for animation characters is very important in expressing a given characters image and characteristics. Consequently, in this paper, we propose a tool that allows an easy and simple selection of clothing color combinations in conjunction with previous color combination image research (color image chart). This tool has two functions, The first allows the user to search what color best fits a given image, and the second calculates which image is closest to the color that user has chosen. This tool was developed so it can be used over the web, and was used to verify whether the color combination for Disney and Dream Works animated characters' clothing has been selected appropriately according to the character's image, as determined through a survey.