• 한국축산식품학회지
• /
• 제22권4호
• /
• pp.363-372
• /
• 2002

Reducing the fat content of processed meat products can be performed by (1) using leaner raw meat materials (2) inducing non-meat ingredients that serve to replace a portion or all of the fat, and (3) applying new ingredient combinations, technologies or processing procedures that decrease the fat and cholesterol content of meat products. Low-fat meat products were manufactured with Int replacers which were food ingredients that had the functional and sensory properties of fat without contributing fat calories, resulting in lower fat(<3%) content. Added water, non-meat proteins, carbohydrates, such as starch and hydrocolloids(gums) and vegetable oils have been used as typical fat replacers to be used in meat products. In addition, fat substitutes included structural lipids, sucrose polyester and ingredient combinations. Formulations for the manufacture of low-fat meat products in combined with new technologies have focused on the use of fat replacer combinations that contributes a minimum of calories and not detrimental to flavor, juiciness, mouthfeel or textural traits expected more traditional products. In conclusion, some combinations of fat replacements that mimics the flavor, mouthfeel and textural characteristics of fat offer potential for further development of low-fat meat products to have similar characteristics of regular-fat counterparts.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.235-244
• /
• 2021

This study aims to determine the behavior of consumer interest in sustainable fashion products in Indonesia and the factors that influence it. Personal values, Green Trust, and attitude toward green products are studied to get a proper picture of the ethical behavior of consumers. The method used is the Structural Equation Model (SEM) technique using AMOS 23 software. A sample of 103 participants used the convenience sampling technique. The study results show that green trust and attitude toward green products successfully mediate personal value and green purchase intention on ethical fashion products in Indonesia. In this study, it was found that personal values cannot directly influence the purchase intention of sustainable fashion products. The influence of Personal Value must first be mediated by green trust or attitude toward green products to further influence green purchase intention of ethical fashion products in Indonesia. This is not in line with previous studies. Indicators of personal values such as self-transcendence, self-enhancement, conservation, and openness directly cannot predict the behavior of purchase intentions for sustainable fashion products in Indonesia. From the descriptive conclusion of the data obtained, there are various types of meanings of individual values, and fashion consumers in Indonesia are more affected by contextual factors.

• 마케팅과학연구
• /
• 제17권2호
• /
• pp.99-110
• /
• 2007

The widespread use of self-service concepts in retailing has resulted in increased attention to the design of retail environments and to stimuli operating at the point of sale. One such merchandising technique, the "bundled presentation", i.e., related products are presented in close proximity to each other, is widely used by retailers but has rarely been investigated by academic consumer researchers. This study presents the results of a field experiment into the effects of presenting products in their usage context. Customers' attitudes towards the same product displayed in different ways are compared with each other. The results show that related products, i.e., products that are used together, should be presented in a coordinated display. Furthermore, the bundled presentation enhanced consumers' attitudes of the product when they saw it first in a bundled presentation and then evaluated it in front of a traditional presentation.

• Industrial Engineering and Management Systems
• /
• 제14권2호
• /
• pp.159-174
• /
• 2015

Remanufacturing used, end-of-life products is a complex problem involving multiple types of products that may share common parts. Recovery targets assigned by market demand and environmental legislation add more difficulty to the problem. Manufacturers now need to achieve specified take-back and recovery rates while fulfilling demands for remanufactured products. To assists in the demand- and legislation-driven remanufacturing of a family of products (i.e., multiple products that share common parts), this paper introduces a bi-objective mixed integer linear programming (MILP) model for optimizing remanufacturing. The model identifies optimal remanufacturing plans for a product family, whereby, the remanufacturer can achieve demand and recovery targets more profitably and in an environmentally-friendly manner. The model can also be used to quantify and justify the economic and environmental benefits of a product family from a remanufacturing perspective. A case study is presented for remanufacturing an alternatorfamily of products.

• 수산경영론집
• /
• 제52권3호
• /
• pp.1-14
• /
• 2021

The proportions of both the fishery industry and the gross regional domestic product in the national economy are gradually decreasing. If high value-added processed fishery products suitable for regional characteristics are developed, these proportions can be improved. In pursuit of this, it is first necessary to discover processed fishery products specialized in each region and then establish a development framework for them. In this study, location coefficient was used to find processed fishery products specialized in each region. Then, dynamic shift-share analysis was used to establish a development framework which consisted of four development types of processed fishery products. Based on the magnitudes of the industrial mix effect and the regional shift effect, the supporting strategy directions were proposed for four development types of processed fishery products. The supporting strategy directions were all focused on revitalizing the local economy.

• 한국환경보건학회지
• /
• 제46권5호
• /
• pp.495-503
• /
• 2020

Objective: This study aimed to compare the characteristics of humidifier disinfectant-like products (HD-like products) and humidifier disinfectant products (HD products) and introduce actual cases of the usage of HD-like products in hospitals based on an on-site investigation. Methods: The characteristics, chemical components, and usage of HD-like products (Hichlor or Biospot) and HD products (N-with) containing NaDCC (sodium dichloroisocyanurate) were compared. In the process of conducting the on-site investigation, four hospitals were identified as previously using HD-like products. Each on-site investigation to identify the use of HD-like products was composed of four parts: 1) hospital infection control guidelines, 2) manual for humidifiers in patient's rooms, 3) interviews with nursing staff, infection managers, and purchase managers, 4) searching on the product purchase system. Results: Although HD-like products (Hichlor and Biospot) and HD products (N-with) were sold for different usage purposes, they were all white-colored and coin-shaped foaming tablets with the same chemical component, NaDCC. The manual for using HD-like products and HD products was similar (inserting the tablet in a humidifier container with water). Among the four hospitals, one had used Hichlor in the same manner as HD (N-with) by inserting a tablet in 1L of water in a filled humidifier container and Biospot as a kind of detergent for humidifier container cleaning. Another two hospitals had used Biospot and/or Aniosyme as a kind of detergent for humidifier container cleaning. The other hospital had used unknown product in the same manner as N-with, so we thus assumed it was either an HD products (N-with) or HD-like products (Hichlor, Biospot). Conclusion: This study raises the possibility of the development of adverse health effects similar to exposure to an HD-products when exposed to an HD-like products and the possibility of further use in other medical institutions or multi-use facilities. Therefore, an expansion of the investigation is needed in order to confirm whether there have been similar cases in the past.

• 한국환경보건학회지
• /
• 제44권3호
• /
• pp.275-282
• /
• 2018

Objective: Since certain chemicals are widely applied in a variety of consumer products, exposure via simultaneous use of multiple consumer products can put human health at risk. For this reason, use patterns of consumer products are an important factor inhuman health risk assessment. The aim of this study is to investigate co-use patterns of air-fresheners and deodorizers in Korea in order to estimate potential cumulative exposure. Methods: To collect the information on use patterns of air-fresheners and deodorizers, ten air-fresheners and 14 deodorizers were selected. A total of 3,000 participants were recruited and asked through on line questionnaires whether they had simultaneously used the selected air-fresheners and deodorant products in their daily lives. Results: Among the 3,000 participants, 45.6% had used more than two air fresheners and 46.3% used more than two deodorizers. The most common types of air fresheners used concurrently include liquid and candle types for indoor environments, while those of deodorizers were fabric trigger sprays and refrigerator gels. In addition, 73.7% used more than two products without product categories. Fabric trigger sprays were contained in all of the high-ranking product combinations. Conclusions: This study showed that many consumers concurrently used air-fresheners and deodorizers in their daily routines. For accurate exposure assessment, co-use patterns of consumer products should be further investigated.

• Safety and Health at Work
• /
• 제11권4호
• /
• pp.500-508
• /
• 2020

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16-56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion: We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.

• Industrial Engineering and Management Systems
• /
• 제16권1호
• /
• pp.22-43
• /
• 2017

It is urgently-needed to construct a green supply chain (GSC) from collection of used products through recycling of them to sales of products using the recycled parts. Besides, it is necessary to consider the uncertainty in product demand as a risk in a GSC. This study proposes the optimal operations for a GSC with a retailer and a manufacturer. A retailer pays an incentive for collection of used products from customers and sells a single type of products in a market. A manufacturer produces the products ordered by the retailer, using recyclable parts with acceptable quality and compensates the collection cost of used products as to the recycled parts. This paper discusses the following risk attitudes: risk-neutral attitude, risk-averse attitude, and risk-prone attitude. Using mean-variance analysis, the optimal decisions for product order quantity, collection incentive, and lower limit of quality level, in the decentralized GSC (DGSC) and the integrated GSC (IGSC) are made. DGSC optimizes the utility function of each member. IGSC does that of the whole system. The analysis numerically investigates how (i) risk attitude and (ii) quality of recyclable parts affect the optimal operations. Supply chain coordination between GSC members to shift IGSC from DGSC is discussed.

• 한국의상디자인학회지
• /
• 제22권4호
• /
• pp.17-24
• /
• 2020

Storytelling, a medium that arouses the customers' purchasing need by playing on their emotions, is the best content that can be used as it can increase the value of goods using information. This paper's significance is that it suggests cultural products that can be used by using Baeke relic Jinmyosu (Guard Animals) as a motif. The purpose was to present the possibility of high value-added cultural products using storytelling techniques. This study developed storytelling by adding the meaning of Jinmyo and Beoksa, who calm protected their masters from evil forces with horns and wings, and has the meaning of ascending into heaven and guiding the soul on the right path. That image gives a glimpse of originality and differentiation to Baekje. This study proposed 4 cultural products as 'Keeper Stone Mason' and 4 'Stone Mason Teller.' The proposed cultural products can help to give correct awareness of Baekje culture through a correct understanding of the historical significance of the Baeke relic, Jinmyosu. Moreover, it will help promote the originality and excellence of Baekje culture around the world by enhancing the value of Baekje culture. This study is expected to be used as a guideline for further research on developing cultural products that can create added value in various fields.