• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 제14회 신호처리 합동 학술대회 논문집
• /
• pp.579-582
• /
• 2001

The performance of a coherent rake receiver of DS-CDMA systems is significantly affected by the accuracy of channel estimation. The performance of the channel estimator can be improved by employing a channel estimation filter (CEF) whose impulse response is adjusted according to the channel condition. In this paper, we consider the design of an adaptive channel estimator for DS-CDMA systems with a pilot channel. The proposed channel estimator estimates the channel condition, which can be performed without haying exact a priori information on the operating condition. The estimated channel condition adjusts the impulse response of the CEF. Numerical results show that the use of the proposed channel estimator can provide BER performance quite robust to a wide range of channel condition.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.151-156
• /
• 2002

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. One of the solution methods for resolve these problems is to reduce freezing temperature of concrete by the use of chemical admixture called Accelerators for freezing resistance. In this study, we investigate the effect on strength development of cement mortar using accelerators for freezing resistance with the variance curing condition. As the result of this study, the mortar using accelerators for freezing resistance show that continuously strength development in curing condition of -5$^{\circ}C$. And compressive strength under the variance temperature condition was higher than constant temperature condition in same maturity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.533-536
• /
• 2001

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. One of the solution methods for resolving these problems is to reduce freezing temperature of concrete by the use of chemical admixture called Accelerators for freezing resistance. In this study, we investigate the effect on strength development of cement mortar using accelerators for freezing resistance with the variance curing condition. As the result of this study, the mortar using accelerators for freezing resistance show that continuously strength development in curing condition of -5$^{\circ}C$. And compressive strength under the variance temperature condition was higher than fixed temperature condition in same maturity.

• 아동학회지
• /
• 제7권1호
• /
• pp.85-95
• /
• 1986

The purpose of the present research was to study effects of experimental conditions and developmental tendency in the use of external cues in memory-for-object location in toddlers. This study consisted of two experiments. In study 1, the subjects were 12 toddlers, 18 to 23 months old ; in study 2, 30 toddlers, 24 to 41 months old. The findings showed that memory-for-object location in toddlers was different in accordance with experimental conditions; that is, memory-for-object location in the natural condition was significantly better than in the artificial condition. Effects of external cues were found ; that is, memory-for-object location was best in the condition of spatial cues, and next best in the condition of picture cues, and least good in the no cue condition.

• 연구논문집
• /
• 통권29호
• /
• pp.185-194
• /
• 1999

The shape and thickness distribution according to the pressure-time curve were carried out using the FEM and experiment. Also, mechanical properties were investigated. The square cup parts have been formed with pressure-time curve generated by result of analysis. The tensile strength and elongation have been investigated according to applied pressure conditions using the tensile test specimen obtained from the superplastic formed cup. We can use to predict the shape of formed part under the applied pressure using the FEM analysis. In the case of optimum pressure condition, the thickness distribution and mechanical properties were improved. From this study, we can find the important of optimum pressure-time condition. We have investigated about the forming of airplane part and fuel tank for motorcycle. If the applied load used in boundary conditions was appropriate, the simulation result coincides with the formed part. However, it is very difficult to define the pressure condition in complicated shape. Thus, it is need to develop the optimum pressure condition for superplastic forming.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제18권3호
• /
• pp.201-217
• /
• 2011

The aim of this paper is to define a new commutativity condition for a pair of self mappings i.e., (DS)-weak commutativity condition, which is weaker that compatibility of mappings in the settings of intuitionistic Menger spaces. We show that a common fixed point theorem can be proved for nonlinear contractive condition in intuitionistic Menger spaces without assuming continuity of any mapping. To prove the result we use (DS)-weak commutativity condition for mappings. We also give examples to validate our results.

• Kyungpook Mathematical Journal
• /
• 제47권3호
• /
• pp.311-322
• /
• 2007

This paper deals with space Beltrami system with three characteristic matrices in even dimensions, which can be regarded as a generalization of space Beltrami system with one and two characteristic matrices. It is transformed into a nonhomogeneous $p$-harmonic equation $d^*A(x,df^I)=d^*B(x,Df)$ by using the technique of out differential forms and exterior algebra of matrices. In the process, we only use the uniformly elliptic condition with respect to the characteristic matrices. The Lipschitz type condition, the monotonicity condition and the homogeneous condition of the operator A and the controlled growth condition of the operator B are derived.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제23권1호
• /
• pp.19-30
• /
• 2019

In this paper, we develop an accurate explicit finite difference method for the two-dimensional Black-Scholes equation with a hybrid boundary condition. In general, the correlation term in multi-asset options is problematic in numerical treatments partially due to cross derivatives and numerical boundary conditions at the far field domain corners. In the proposed hybrid boundary condition, we use a linear boundary condition at the boundaries where at least one asset is zero. After updating the numerical solution by one time step, we reduce the computational domain so that we do not need boundary conditions. To demonstrate the accuracy and efficiency of the proposed algorithm, we calculate option prices and their Greeks for the two-asset European call and cash-or-nothing options. Computational results show that the proposed method is accurate and is very useful for nonlinear boundary conditions.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.145-150
• /
• 2003

Mobile mapping system is a surveying system that use vehicle carrying various sensors as CCD camera, GPS and IMU(Inertial measurement Unit). This system capturing images of forward direction continuously while running road. Use these images, then acquire road and road facilities information as facilities position, size or maintenance condition. In this study, we organized data and each data processing steps that are needed for 3 dimensional positioning. And develop digital photogrammetry S/W easy to use and accurate for mobile mapping system.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.229-235
• /
• 2004

This paper treats accelerated life tests for automotive connector. The contact resistance of connector is explained by some factors; the use time(calender time, real cycle), stresses and loads adapted in auto test. The relationships between contact resistance and some factors are compared and analyzed by regression models in various test conditions; field use-environment, manufacturer's test environment, and accelerated test condition. The consistency between of manufacturer's test and field test is examined. Finally, the future study on accelerated test for automotive connector is presented.