• The Journal of Advanced Prosthodontics
• /
• v.13 no.3
• /
• pp.136-143
• /
• 2021

Purpose. This study aimed to evaluate the effect of repeated use of an implant handpiece under an implant placement torque (35 Ncm) and overloading torque condition (50 Ncm) on an output torque. Materials and Methods. Two types of implant handpiece systems (Surgicpro/X-DSG20L [NSK, Kanuma, Japan] and SIP20/CRB46LN [SAESHIN, Daegu, South Korea]) were used. The output torque was measured using a digital torque gauge. The height and angle (x, y, and z axes) of the digital torque gauge and implant handpiece were adjusted through a jig for passive connection. The experiment was conducted under the setting torque value of 35 Ncm (implant placement torque) and 50 Ncm (overloading torque condition) and 30 times per set; a total of 5 sets were performed (N = 150). For statistical analysis, the difference between the groups was analyzed using the Mann-Whitney U test and the Friedman test was used to confirm the change in output torque (α=.05). Results. NSK and SAESHIN implant handpieces showed significant differences in output torque results at the setting torques of 35 Ncm and 50 Ncm (P<.001). The type of implant handpiece and repeated use influenced the output torque (P<.001). Conclusion. There may be a difference between the setting torque and actual output torque due to repeated use, and the implant handpiece should be managed and repaired during long-term use. In addition, for successful implant results in dental clinics, the output torque of the implant handpiece system should be checked before implant placement.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.347-348
• /
• 2002

The numbers of synthetic greases have been developed with synthetic oils because of their excellent performance factors including thermal/oxidation stability, low-temperature fluidity and plastic compatibility. Long life under high-temperature condition and excellent low-temperature fluidity are required to serve as grease for bearings of engine room electrical component. As many plastics are used in place of metals for the purpose of weight saving, synthetic hydrocarbon grease is in use to avoid adverse effect on plastics. Other various special synthetic greases are also in use depending on specific requirements like conductivity and vacuum condition.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.3
• /
• pp.53-60
• /
• 2014

The purpose of this paper is to seek the dwelling conditions for comfortable life like urban apartment with agriculture in farming area. In order to do above things, we divide types of people who is planning to 'return farm' and need to heavily research and analyze current status of use for farm house's each spaces include outside spaces. so this paper aimed that at first, divide types of farmhouse following agriculture condition for people who is living in rural and survey the present condition and problems by analyzing of present status of space use and draw the improvement plans for those. after then, finally make a architectural basic data for Rural houses plan. For the future, the main purpose of this paper is that make architectural provision possible by researching types and size of storage following sort and size of farm.

• Journal of the Korean Institute of Rural Architecture
• /
• v.6 no.1
• /
• pp.21-31
• /
• 2004

The purpose of this study is to clarify the actual condition of the spatial use patterns of the elderly in skilled nursing facilities. The thorough investigation and observation works were made to them from the view points of daily living behaviors and behavioral places of the recuperating elderly. This article discusses about the basic characteristics of 194 elderly and the actual condition of the daily living activities of 24 elderly in 3 skilled nursing facilities. The results of this study are summarized as follows; There is no wide difference between the skilled nursing facilities for the dementia and the skilled nursing facilities on the characteristic of living behaviors of the elderly. The usage of behavioral places in recuperating facilities are influenced by the physical environments and the basic characteristics of the elderly.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.20-27
• /
• 1999

The proportion of diesel vehicle is very high in this country . PM and NOx emitted from diesel-posered vehicle is severely ;affecting to be air quality . Especially, diesel particulate matters(DPM) including black smoke are hazardous air pollutants to human health and environment. In order to reduce the exhaust emissions from diesel engines, it is necessary to analyze the characteristics of exhaust emissions from diesel engines in various driving conditions. Recently, there are occasion to increase the fuel consumption rate to engine power up. So, in this study we have tested a diesel engine detached from in use -diesel vehicle and analyzed exhaust emission by driving condition and fuel dispersion rate. From this results, we will prepare the comprehensive management plan for exhaust emissions from diesel vehicles and contribute to the improvement of air pollution in urban area.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.891-894
• /
• 1998

This paper introduces an automatic face region extraction method. This method consists of two part: face recognition and extraction of facial organs which are eye, eyebrow, nose and mouth. In first stage, we use genetic algorithms(GAs) to get face region in complex background. In second stage, we use Geometrical Face Model to textract eye, eyebrow, nose and mouth. In both stage, stochastic component is used to deal with the problems caused by had lighting condition. According to this value, blurring number is determined. Average Computation time is less than 1 sec, and using this method we can extract facial feature efficiently from several images which has different lightning condition.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.286-293
• /
• 2017

The dormitory, a common facility for college students, is being deployed and used in terms of both efficient use of space for students and comfortable living. Among them, I was in charge of the rest of the students in the dormitory and investigated and analyzed the dormitory bed which occupied the largest portion of the indoor space. The purpose of this study is to investigate the present condition of bed arrangement and the use condition of the university dormitory in Seoul, and finally to design the bed design which is practical and maximize storage for the students in the dormitory space that accommodates a large number of people, Respectively.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.13-27
• /
• 1995

This paper considers the design of life test sampling plans based on Type II censored accelerated life tests. The lifetime distribution of products is assumed to be exponential. An estimator of acceleration factor between use condition stress and an accelerated level of stress higher than use condition stress is assumed to be known. The critical value for lot acceptance and the number of failure before censoring which satisfy the producer's and consumer's risk requirements are determined. The properties of the proposed life test sampling plans are investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.571-576
• /
• 2006

A Color Discerning Device(CDD) is the equipment to use in Rice Processing Complex(RPC). By use a high-speed charge-coupled device camera, CDD can sorting discolored grain according to light and shade. The existing CDD's driving performance is not so good as overseas machine. Besides, transportation process causes a defect in the mechanism from impact or harmonic excitation or etc. This study is represented the problem of CDD through modal analysis and static analysis by using ANSYS workbench. To analysis the problem of driving condition, devide each part of CDD for performed modal analysis. The problem of driving condition and transportation process solved by carry out modal analysis and static analysis.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.96-108
• /
• 2003

Agricultural water occupies the largest portion of total water use in Korea, and generally researches on the development of agricultural water have been stressed on the demand of agricultural water itself. But it is unavoidable to change a policy from the development of water resources to cope with the increase of water demand to the effective management of existing water resources. Evaluation of the decrepitude of irrigation facilities and their reasonable maintenance are important for the effective supply and use of agricultural water. Therefore it is necessary to develop evaluation technique that diagnoses the current condition of irrigation canals and suggest a countermeasure to improve the found problems. 25 items in 6 classes were selected for the evaluation of irrigation canal systems, and the weighted value between the items was calculated using AHP (Analysis Hierarchy Process) method. The current condition of the irrigation facilities was evaluated from the class evaluation marks, and ranking was decided from the total marks between the projects, and finally the priority of the project for the improvement was given.