• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.130-138
• /
• 2014

This paper assessed the weights of attributes in creating transit malls. The aim of the creation was classified as travel demand management and urban revitalization. The attributes were grouped into four aspects, or 4As: attraction, amenity, accessibility, and activity. These dimensions represented land-use, urban design, transport, and socio-cultural characteristics, respectively. The analytical hierarchy process was applied to explore the weights. Accessibility(52.7%), attraction(25.6%), amenity(13.7%), and activity(8.0%) were the order of magnitude in weights for the purpose of travel demand management, while attraction(36.1%), accessibility(30.6%), amenity(17.7%), and activity(15.6%) were that of urban revitalization. The multi criteria analysis also showed different size of weights in the sub planning attributes. These results indicate that the aimin implementingtransit malls should be differentiated and highlight that the combined land-use and transport plan is essential for the successful development. Car accessibility and socio-cultural characteristics are also understood as the important factors.

• Journal of Environmental Impact Assessment
• /
• v.4 no.2
• /
• pp.131-149
• /
• 1995

The object of this study is to suggest some alternatives for environmental management towards sustainable urban development of Chongju city in Korea. This study analyses urban environmental indicators (population density, land use, road, park, car, etc.), level of air and water pollution and solids waste generation by comparing Chongju city and other large cities. Some alternatives towards sustainable development in Chongju city would be summerized and suggested as higher concentrated land use(compact city), mixed land use, supply of mass transit, establishment of regional environmental standards, total emission regulation of air and water pollutants, the preparation of Local Agenda21 of Chongju, and the introduction of strategic environmental assessment(SEA) into environmental impact assessment.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.603-608
• /
• 2002

Sound absorbing materials are applied to the exposed surfaces of curved subway tunnel for the reduction of curving noise level. Before the treatment, acoustical engineering simulation is performed to predict the noise level reduction for different kinds and amounts of absorbing material. The principle of geometrical acoustics is utilized to Peform the simulation efficiently and accurately. The noise levels of the inside and outside of running car body are measured to find the noise level reduction. The average noise level reduction of 8 ㏈ has been attained. It has been shown that the simulated results are comparable to the measured ones.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1051-1055
• /
• 2003

Aluminum carbody for rolling stocks is light and perfectly recycled, but includes severe defects which are very dangerous to fatigue strength. Structural integrity assessment for the carbody by static load test has been performed up to date. In this study, to evaluate fatigue strength of the aluminum carbody of urban transit unit. a testing method to simulate dynamic loading condition was proposed and the fatigue strength of the carbody was evaluated. The dynamic load test results showed that the alternating stress ranges were different from the estimated ranges based on the static test results. Excessive stress ranges at the center are thought to come from the flexible motion of the carbody. published fatigue test data for aluminum components, but variation of alternating acceleration along the length due to flexibility of carbody yielded unexpected results. Because fatigue strength based on the static test results may be overestimated at the center, modification of testing method is necessary.

• Journal of Korean Society of Transportation
• /
• v.23 no.8 s.86
• /
• pp.7-17
• /
• 2005

Transportation is from an individual mobility. Various efforts to propose specific values or the individual mobility have been conducted in diverse transportation environment. However, mobility studies for multimodal public transportation are rare especially on not the range of line but area. This study propose a method to calculate transit mobility indices as expanding mobility analysis from point-to-point to area-to-area, considering access time to transit facility, running time and transfer time of passengers. To extract mobility indices, we included walking as a lowest category of mode and set passenger car as a competitive mode to transit mode. This study propose three public transportation mobility indices as 1) how competitive public transportation facility is offered against passenger car 2) how convenient transit mode including walking is provided against passenger car from origin to destination and 3) how many various paths are presented to support passenger's travel between regions. These indices are tested on the Seoul metropolitan area with 10 lines of urban rail and about 420 lines of bus. In addition, we proposed two political applications of proposed mobility indices to increase public transportation mobility between two regions and to maximize the mobility of study area when a line is added in the area.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.616-620
• /
• 2003

Brake action is important in train operation. In case of diesel motor cas, coachs and wagon, the brake system is only act on the stop of train, but it is emphasis on safety and convenience in urban transit system such as EMU, subwar, AGT, etc. Brake of EMU has two types. one is called service brake that is used at normal operation. The other is called emergency brake. it is used at emergency operation. Service brake bring a EMU to a halt through a blending brake that form electronic brake and frictional brake. Generally EMU compose motor car and trailer car. Blending brake bring a EMU to a halt through a blending brake that form electronic brake of motor car and frictional brake of trailer car. Blending braking technology have different characteristics each nations or manufacturing companies. but deceleration command that is parameter decide blending brake. According to deceleration command, electronic brake and frictional brake are applied differently So braking power is different. electronic brake and frictional brake must be used appropriately as deceleration command. Also braking facilities must be stopped EMU more economically and safely through revision of algorism about blending brake according to output diagram. Thus The purpose of paper is to propose blending braking control way as consideration of braking output diagram used deceleration command that influence blending brake of EMU.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.860-863
• /
• 2005

Dynamic model of the Korea standardized rubber-tired AGT light rail vehicle, and boundary conditions between vehicle and infrastructures (running track, guidance rail) were defined to analyze vehicular vibration behaviors occurred at the worst condition. Using the commercialized software RecurDyn, vibration accelerations of car body and bogies were analyzed. Based on the Korea performance test criteria for urban transit, vertical and lateral vibration of car body were calculated and evaluated. As the results, the Korea standardized rubber-tired AGT light rail vehicle satisfied the performance criteria and design requirement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.273-276
• /
• 2004

Dynamic model of the Korea standardized rubber-tired AGT light rail vehicle, and boundary conditions between vehicle and infrastructures (running track, guidance rail) were defined to analyze vehicular vibration behaviors occurred at the worst condition for straight running track. Using the commercialized software RecurDyn, resultant forces and vibration accelerations of car body and bogies were analyzed. Based on the Korea performance test criteria for urban transit, vertical and lateral vibration of car body were calculated and evaluated as wearing condition of guide wheels. And resultant forces between bogie guidance frame and guide rail in straight running track were analyzed. As the results, the Korea standardized rubber-tired AGT light rail vehicle satisfied the performance criteria and design requirement .

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.170-176
• /
• 2000

Nowadays, the vehicle structure weight of urban transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the standard EMU power car is evaluated to the static and fatigue strength. And, the evaluation method is used the JIS E4207 specification throughout the FEM analysis and static load test. The static and fatigue test results for the standard EMU bogie frame of power car has been appeared very safety and stable for the design load conditions.