• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.637-652
• /
• 2015

In the present work, a number of three-dimensional (3D) parametric numerical analyses have been carried out to study the influence of tunnelling on the behaviour of adjacent piles considering the transverse distance of the pile tip from the tunnel. Single piles and $5{\times}5$ piles inside a group with a spacing of 2.5d were considered, where d is the pile diameter. In the numerical modelling, several key issues, such as the tunnelling-induced pile settlements, the interface shear stresses, the relative shear displacements, the axial pile forces, the apparent factors of safety and zone of influence have been rigorously analysed. It has been found that when the piles are inside the influence zone, the pile head settlements are increased up to about 111% compared to those computed from the Greenfield condition. Larger pile settlements and smaller axial pile forces are induced on the piles inside the pile groups than those computed from the single piles since the piles responded as a block with the surrounding ground. Also tensile pile forces are induced associated with the upward resisting skin friction at the upper part of pile and the downward acting skin friction at the lower part of pile. On the contrary, when the piles were outside the influence zone, tunnelling-induced compressive pile forces developed. Based on computed load and displacement relation of the pile, the apparent factor of safety of the piles was reduced up to about 45%. Therefore the serviceability of the piles may be substantially reduced. The pile behaviour, when considering the single piles and the pile groups with regards to the influence zone, has been analysed by considering the key features in great details.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.597-603
• /
• 2012

To investigate the effects of weir construction on sediment characteristics of river bed, we conducted sediments sampling on the 9 locations near the weir, Kangchun, Yuju and Ipo in Namhan-River. Physical and chemical characteristics of sediments were analyzed by measuring particle size distribution, water content, Ignition loss, COD (Chemical Oxyzen Demand), TOC (Total Organic Carbon), TP (Total Phosphorus), SRP (Soluble Reactive Phosphorus) and TN (Total Nitrogen). Particle classification of all three weir sediments showed sandy loam that was caused by the river bed dredging. Due to the presence of weir, Ignition loss, COD, TOC, TP, SRP and TN showed similar trend such as the concentrations of upward weir had higher than those of downward weir. For the case of SRP concentration and C/N ratio, however, there is not much difference in the sediment characteristics compared to the those of sediments before weir construction. Therefore, It can be predicted that there are little effects of weir construction on sediment characteristics. However, weir construction could influence water quality of the river by controlling the transport and the accumulation of suspended materials from rainfall. Therefore, more intensive monitoring is required to examine the magnitude and patterns of sediment accumulation which could influence overlying water quality.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.537-542
• /
• 2022

The "cognitive warfare," which has emerged as a result of the Ukrainian-Russian war, has already existed in the previous war and is now emerging as a major aspect of the war, its meaning and influence are increasing. Recognizing the emergence and importance of cognitive warfare and understanding the meaning and characteristics of cognitive warfare must be accompanied by victory in the modern war. After Russia's alleged involvement in the U.S. presidential election in 2016 drew attention, the Israeli-Palestinian conflict in 2021 confirmed its upward influence. In particular, 'cognitive warfare' using SNS played a major role in leading the war to its advantage and maintaining the initiative by selecting clear purposes and targets such as the international community, the people, and Hamas. This new pattern of war is gradually emerging as the world is hyper connected with the advent of the Fourth Industrial Revolution. It is expected that it will play a leading role in the future battle if it clearly recognizes the main contents of the new war, "Injijeon," and has the ability and ability to actively operate it.

• Analyses & Alternatives
• /
• v.7 no.3
• /
• pp.85-114
• /
• 2023

The purpose of this study is to analyze Russia-Central Asia relations since the launch of the EAEU in 2015 and forecast the future from a structural realism perspective. Bilateral relations have both elements of close cooperation and elements of conflict. Russia and Central Asia, which have the characteristics of an authoritarian alliance, also have a symbiotic relationship in which they have no choice but to cooperate with each other to maintain the regime. Based on this, Russia has made various efforts to reunify Central Asia. Central Asia also has no choice but to cooperate with Russia for its survival, but at the same time, it has expanded its scope of cooperation in the international community to avoid being subjugated to Russia again. However, as China's power expands, Russia's relative weakness, and wariness toward Russia increases after the Ukraine War, the gap in bilateral relations is widening. In particular, as China's influence grows, Russia's nervousness also increases. This is why Putin visits Central Asia and holds active summit talks even during the war in Ukraine. If competition between Russia and China surfaces, there is a high possibility that the international order in Central Asia will become unstable. However, it is still unlikely that the power of Russia and China will reverse in Central Asia. Above all, the security, historical, and cultural connections between Russia and Central Asia are areas that are difficult for China to catch up with. Therefore, a weakening of Russia's influence compared to the past is inevitable, but its superiority is expected to continue. If Russia breaks away from belligerence and transforms into an attractive cooperative partner, there is a possibility that bilateral relations will take an upward turn again. However, it seems unlikely that such changes and innovations will occur under the Putin regime. Therefore, the biggest obstacle to realizing Putin's goal of reunifying Central Asia is Putin himself.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.173-189
• /
• 2000

The purpose of this study was to evaluate the effect of specific head positions on the mandibular rotational torque movements in maximum mouth opening, protrusion and lateral excursion. Thirty dental students without any sign or symptom of temporomandibular disorders(TMDs) were included as a control group and 90 patients with TMDs were selected and examined by routine diagnostic procedure for TMDs including radiographs and were classified into 3 subgroups : disc displacement with reduction, disc displacement without reduction, and degenerative joint disease. Mandibular rotational torque movements were observed in four head postures: upright head posture(NHP), upward head posture(UHP), downward head posture(DHP), and forward head posture(FHP). For UHP, the head was inclined 30 degrees upward: for DHP, the head was inclined 30 degrees downward: for FHP, the head was positioned 4cm forward. These positions were adjusted with the use of cervical range-of-motion instrumentation(CROM, Performance Attainment Inc., St. Paul, U.S.A.). Mandibular rotational torque movements were monitored with the Rotate program of BioPAK system (Bioresearch Inc., WI, U.S.A.). The rotational torque movements in frontal and horizontal plane during mandibular border movement were recorded with two parameters: frontal rotational torque angle and horizontal rotational torque angle. The data obtained was analyzed by the SAS/Stat program. The obtained results were as follows : 1. The control group showed significantly larger mandibular rotational angles in UHP than those in DHP and FHP during maximum mouth opening in both frontal and horizontal planes. Disc displacement with reduction group showed significantly larger mandibular rotational angles in DHP and FHP than those in NHP during lateral excursion to the affected and non-affected sides in both frontal and horizontal planes(p<0.05). 2. Disc displacement without reduction group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening as well as lateral excursion to the affected and non-affected sides in both frontal and horizontal planes. Degenerative joint disease group showed significantly larger mandibular rotational angles in FHP than those in any other head postures during maximum mouth opening, protrusion and lateral excursion in both frontal and horizontal planes(p<0.05). 3. In NHP, mandibular rotational angle of the control group was significantly larger than that of any other patient subgroups. Mandibular rotational angle of disc displacement with reduction group was significantly larger than that of disc displacement without reduction group during maximum mouth opening in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group or degenerative joint disease group during maximum mouth opening in the horizontal plane(p<0.05). 4. In NHP, mandibular rotational angles of disc displacement without reduction group were significantly larger than those of the control group or disc displacement with reduction group during lateral excursion to the affected side in both frontal and horizontal planes. Mandibular rotational angle of disc displacement without reduction group was significantly smaller than that of the control group during lateral excursion to the non-affected side in frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of disc displacement with reduction group during lateral excursion to the non-affected side in the horizontal plane(p<0.05). 5. In NHP, mandibular rotational angle of the control group was significantly smaller than that of disc displacement with reduction group or disc displacement without reduction group during protrusion in the frontal plane. Mandibular rotational angle of disc displacement without reduction group was significantly larger than that of the disc displacement with reduction group or degenerative joint disease group during protrusion in the horizontal plane. Mandibular rotational angle of the control group was significantly smaller than that of disc displacement without reduction group or degenerative joint disease group during protrusion in the horizontal plane(p<0.05). 6. In NHP, disc displacement without reduction group and degenerative joint disease group showed significantly larger mandibular rotational angles during lateral excursion to the affected side than during lateral excursion to the non-affected side in both frontal and horizontal planes(p<0.05). The findings indicate that changes in head posture can influence mandibular rotational torque movements. The more advanced state is a progressive stage of TMDs, the more influenced by FHP are mandibular rotational torque movements of the patients with TMDs.

• Land and Housing Review
• /
• v.5 no.1
• /
• pp.41-51
• /
• 2014

The amount of new apartment construction has been trending upward in 3~4% each year since 11% increase in 2002. Currently, in public apartment construction sites under separate delivery system for construction waste processing, the significant difference between estimated quantity for contract and actual amount frequently causes severe controversy among project participants. Many factors such as poor environmental management, inadequate contractual amount are assumed to influence the above problem, and the requirement to revise existing generation rates, the key criteria applied in estimating the quantities of waste, is increasing. Most of generation rates were established in early 2000's, and have difficulty in reflecting the changes from new materials and technologies accordingly. Therefore, this study aims to clarify the types of construction waste for each trade and the forecast method as preliminary work in order to develop more accurate generation rates for construction waste in new construction. To achieve this purpose, the architectural bills of quantities in ten apartment projects executed during 2010~2013 were collected, and the possible waste types and reasonable material loss ratio for each item from temporary works to owner-supplying material area were defined and compared through the workshops and interviews with the experts and on-site environmental managers. The results of this study will contribute to establishing the categories of construction waste for construction trades and proper generation rates by the indirect estimation method in new apartment construction in the follow-up study.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.8
• /
• pp.985-994
• /
• 2000

Objective : There are some advantages of trigeminal evoked potential(TEP) recording compared to other somatosensory evoked potential(SSEP) recordings. The trigeminal sensory pathway has a pure sensory nerve branch, a broader receptive field in cerebral cortex, and a shorter pathway. Despite these advantages, there is little agreement as to what constitutes a normal response and what wave forms truly characterize the intraoperative TEP. This study presents the normative data of TEP recorded on the epidural surface of the rat with a platinum ball electrode. Materials & Methods : Under general anesthesia with urethane, the adult Sprague-Dawley male rats(300-350g) were given electrical stimulation with two stainless steel electrodes which were inserted into the subcutaneous layer of the area around whiskers. A reference electrode was positioned in the temporalis muscle ipsilateral to the recording site. Results : TEPs were recorded in the Par I area of somatosensory cortex and recorded most apparently on the point of 2mm posterior from the bregma and 6mm lateral from the midline. The typical wave form consisted of 5 peaks (N1-P1-N2-P2-N3 according to emerging order, upward negativity). Each latency to corresponding peaks was not influenced by the different intensities of stimulation, especially from 1 to 5mA. Average latencies of 5 peaks were in the following order ; 7.7, 11.1, 15, 22.3, 29.4ms. There was also no significant difference between latencies before and after administration of muscle relaxant(pancuronium). For the electrophysiological localization of recorded waves, the action potential of a single unit was recorded with glass microelectrode(filled with 2M NaCl, $3-5M{\Omega}$) in the thalamus of rat. A sharp wave was recorded in the VPM nucleus, in which the latency was shorter than that of N1. This suggests that all 5 peaks were generated by neural activities in the suprathalamic pathway. Conclusion : In terms of recording near-field potentials, our data also suggests that TEP in the rat may be superior to other SSEPs. In overall, these results may afford normative data for the studies of supratentorial lesions such as hydrocephalus or cerebral ischemia which can have an influence on near-field potentials.

• The Korean Journal of Pain
• /
• v.3 no.2
• /
• pp.108-118
• /
• 1990

Splanchnic nerve block (SNB) is performed to relieve intractable upper abdominal pain caused by carcinoma of the upper G-I tract. Not all patients achieve satisfactory pain relief; therefore, a second or third nerve block trial may need to be performed. In this study, an attempt was made to analyze the possible factors which might affect the result of repeated SNB in 42 the patients among 264 patients who received SNB at Severance Hospital during the period from January 1985 to December 1989. The results are as follows: 1) Among the 42 patients, including 30 males and 12 females, the fifties and forties were the major age groups. 2) Among the underlying diseases, stomach cancer was the most common (18 cases) and pancreatic cancer was next (14 cases). 3) The main locations of pain were the upper abdomen, epigastrium and entire abdomen in decreasing order. 4) Among the thirty-nine cases of first SNB combined with ascites, 13 cases received a repeat block, 81.0% of whom had had metastatic lesion. 5) There were 54.2% who had had single or combined treatment, operation, chemotherapy or radiotherapy before SNB. 6) Twently seven cases (64.3%) had received opioid medication for pain control. 7) In the 75% alcohol group, 11.7% of patients required a second block, and in the pure and 50% alcohol group, 9.6% of patients required a second block within two weeks of the first block. Three cases in both of these repeated block groups required a third block; representing 3.9%, of the 75% alcohol group and 1.6% of the pure and 50% alcohol group. 8) The volume of alcohol used was more than 16 ml bilaterally in both cases. 9) The points of the inserted needle were positioned in the upper and anterolateral part of the $L_1$ vertebra on both sides on the anteroposterior roentgenogram. The contrast media was spread upward along the anterior margin of the vertebral body and posteriorly in repeat block. The frequency of repeat block was higher in cases with ascites or metastasis. The instance of repeat block within 2 weeks of the first block was lower in the pure and 50% alcohol group than in the 75% alcohol group. Thus, alcohol concentration and patient status may be considered factors which influence the result of repeated SNB. We suggest early application of SNB in upper abdominal cancer patients.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.3
• /
• pp.89-98
• /
• 2018

Purpose - Despite the global economic crisis, the numbers of coffee shops used for providing a place for social and cultural interactions show an upward trend and have become an indispensable part in people's daily life in recent years. Under the circumstance of tremendous efforts of searching new management strategies and projects, the concept of servicescape(which has physical environment characteristics) may provide a better alternative. Therefore, the purpose of this study can be broadly divided into 3 key points. First is to investigate the effects of servicescape on customer satisfaction, service value and customer loyalty about Coffee Shops in Jeonju area. Second is to examine the mediating effect of customer satisfaction and service value between servicescape and customer loyalty. Third, there is evidence that indicates the moderating effect among the interaction of customer and staff, brand image and the composition of servicescape, customer satisfaction, service value and customer loyalty. Research design, data, and methodology - This study begins empirical research about users of coffee shops' services. The data of the study is collected from 285 samples of a questionnaire which has been made from Korea and analysed by IBM SPSS 24.0 and IBM AMOS 24.0. Results - The results are reported below: First of all, the composition of condition, functionality, cleanliness and aesthetic characteristics of the servicescape has a significant impact on customer satisfaction and service value. Furthermore, customer satisfaction is identified as a factor to influence service value. Moreover, customer satisfaction and service value are identified as the causal relationship with customer loyalty. Besides, customer satisfaction and service value illustrated the mediation effect between the composition of servicescape and customer loyalty. Finally, the interaction between customer and staff, brand image illustrates the moderated effect. Conclusions - The composition of servicescape contributes to the formation of customer satisfaction and enhancing the customer's perceived service value in coffee shops. By meeting diverse and complex needs of consumers in coffee shop, the service value will not only attract loyal customers, but also increase customer loyalty and profitability. In a word, managers should rely on servicescape to enhance service experience by making differences with other competitors.