• Title/Summary/Keyword: Upright position

Search Result 133, Processing Time 0.026 seconds

Flexural behavior of steel storage rack base-plate upright connections with concentric anchor bolts

  • Zhao, Xianzhong;Huang, Zhaoqi;Wang, Yue;Sivakumaran, Ken S.
    • Steel and Composite Structures
    • /
    • v.33 no.3
    • /
    • pp.357-373
    • /
    • 2019
  • Steel storage racks are slender structures whose overall behavior and the capacity depend largely on the flexural behavior of the base-plate to upright connections and on the behavior of beam-to-column connections. The base-plate upright connection assembly details, anchor bolt position in particular, associated with the high-rise steel storage racks differ from those of normal height steel storage racks. Since flexural behavior of high-rise rack base connection is hitherto unavailable, this investigation experimentally establishes the flexural behavior of base-plate upright connections of high-rise steel storage racks. This investigation used an enhanced test setup and considered nine groups of three identical tests to investigate the influence of factors such as axial load, base plate thickness, anchor bolt size, bracket length, and upright thickness. The test observations show that the base-plate assembly may significantly influence the overall behavior of such connections. A rigid plate analytical model and an elastic plate analytical model for the overall rotations stiffness of base-plate upright connections with concentric anchor bolts were constructed, and were found to give better predictions of the initial stiffness of such connections. Analytical model based parametric studies highlight and quantify the interplay of components and provide a means for efficient maximization of overall rotational stiffness of concentrically anchor bolted high-rise rack base-plate upright connections.

An Experimental Study on the Effects of Nursing Care According to Change of Position During Labor (분만과정중 산모 체위변경에 따른 간호효과의 실질적 연구)

  • 조원분
    • Journal of Korean Academy of Nursing
    • /
    • v.8 no.1
    • /
    • pp.139-151
    • /
    • 1978
  • This study is to observe the effects of nursing care according to change of position for comfort during labor and safe delivery of newborn infants and perturbment women. Fifty antepartal primipara with labor pain who were admitted to the delivery room of H University Medical Center from September 1, 1976 to November 15, 1976 (Estimate Delivery Confinement) were selected for this investigation. Among the 50 parturiencys, the experimental group (28 primipara) were placed in 30 degree upright sitting position and the control group (22 primipara) were placed in the supine position. following placement, both groups were observed. The summarized findings of the study were as follows; 1. There was a noticeably significant difference in the duration of the first stage of labor (defined as 4 cm. dilatation of the cervical os with the fetal presenting part engaged to full or 10 cm. dilatation) , between the two groups. For women in the 30 degree upright sitting position, the first stage of labor was close to 33.66 minutes shorter. than for the women in the supine position. (t : 32.79, D.F : 48, p<0.0,i) 2. Although slight differences were observed between the Apgar Scores of the newborn infants of primipara in the two groups, these were not significant. The mean Apgar Score among the newborn infants of primipara in the 30 degree upright sitting position was 9.64 compared with 9.04 for the newborn infants of primipara in the supine position, a difference of 0.6. (x$^2$= 2.44, D.F : 2, p〉0.05) 3. There was a significant difference in the conformability of the perturbment women between the two groups because the shortened duration of the first stage and the high level of comfort score calculated for six factors (body activity, serving bed pan, serving kidney basin, pushing, deep breathing and perturbment women's feelings), that affect nursing care.

  • PDF

The Effects of Sitting Posture on Cervical Flexion Angle and Pain during Smart Phone Use in Young Adults

  • Chun, Hye-Lim;Kim, Kyung-Hun;Choi, Bo-Ram
    • Journal of Korean Physical Therapy Science
    • /
    • v.24 no.3
    • /
    • pp.56-63
    • /
    • 2017
  • Purpose: This study aimed to investigate the effects of sitting posture on cervical flexion angle and pain during smart phone use. Method: This research was performed on 10 adult female students who use smart phones regularly, Each of the two groups of participants used the provided smart phone for 20 minutes while maintaining the given default posture. The evaluation order was randomly selected and the two groups were photographed twice before and after the experiment and were asked to answer if they felt pain during or after the experiment. Result: First, both upright sitting position and vertebra bent position pre and post experiment readings showed significant statistical difference (p<.05). And it is shown to be a factor that induces pain around the neck via increase in neck flexion angle. Second, although there were no significant statistical difference between the pre and post experiment readings of the upright sitting position results and the vertebra bent position results, the vertebra bent position readings showed bigger changes to the neck flexion angle then the upright sitting position readings. Third, all participants from both groups claimed pain in all the tested postures of smart phone usage. Conclusion: Smart phone usage for an extended amount of time in all body postures may prove to have a negative effect making the "optimal" smart phone usage position as a controlled time with neck stretches included in between short sessions.

The Effect of Head Posture Change on Initial Occlusal Contacts (두부의 자세 변화가 초기 교합접촉에 미치는 영향)

  • Woo-Cheon Kee
    • Journal of Oral Medicine and Pain
    • /
    • v.20 no.1
    • /
    • pp.195-204
    • /
    • 1995
  • The purpose of this study was to evaluate effect of head posture change on initial occlusal contacts through measuring the distances between initial occlusal contacts and maximum intercuspal position at different head posture. Two special devices were designed and constructed. Mandibular movement replicator was used to assess reliability of the K6 diagnostic system(MKG; Myo-tronic Inc, Seatle, USA) and head posture calibrator was used to maintain the constant head posture during experiment. We measured difference of distance between initial occlusal contact and maximum intercuspal position with MKG in upright, supine, 45 degrees extension, 30 degrees flexion, 30 degrees right and left bending postion of the head. The Frankfurt horizontal plane was used as a reference plane. 21 adults aged from 23 to 25 were selected, who have normal or class I molar relationship, and have no symptoms on TMJ and masticatory muscles, and have restorations less than 3 surfaces on each tooth, and have no other prosthetic restoration. The obtained results were as follows : The mean absolute distances between initial occlusal contact and maximum intercuspal postion were 0.39(0.18mm in the upright position, 0.65(0.37mm in the supine position, 0.59(0.33mm in the 45 degree extension, 0.70(0.53mm in the 30 degrees flexion, 1.12(1.10mm in the 30 degrees right bending and 1.94(0.67mm in the 30 degrees left bending of the head. The positions of the initial occlusal contacts have a tendency to locate anterior, left and inferior to maximal intercuspal position in upright position, posterior and inferior in supine position and 45 degrees extension, anterior and inferior in 30 degrees flexion, right and inferior in 30 degrees right bending, and left and inferior in 30 degrees left bending of the head. There were significant differences among the initial occlusal contacts in each head postures(P<0.0001). Therefore, we need to check initial occlusal contacts in the altered head posture during occlusal analysis and adjustment of occlusal appliance and dental occlusion for diagnosis and treatment of temporomandibular disorder.

  • PDF

Changes of Minute Blood Flow in the Large Vessels during Orthostasis and Antiorthostasis, before and after Atropine Administration (체위변화가 두부 및 하지의 분시혈류량에 미치는 영향)

  • Park, Won-Kyun;Chae, E-Up
    • The Korean Journal of Physiology
    • /
    • v.19 no.2
    • /
    • pp.139-153
    • /
    • 1985
  • The passive tilt has been performed to study the orthostasis on the cardiovascular system. The orthostasis due to upright tilt was demonstrated as follows: the venous return, cardiac output and systemic arteiral blood pressure were decreased, whereas there was concomitant increase of heart rate, through the negative feedback mediated by such as the baroreceptor . Previous investigators have suggested that the tolerance to the orthostasis could he increased by blocking the cholinergic fiber with atropine which prevented vasodilation and bradycardia through the vasovagal reflex during the orthostasis. However, this hypothesis has not been clearly understood. This study was attempted to clarify the effect of atropine on the tolerance of the cardiovascular system to the upright and head-down tilt, and to investigate the change of the blood flow through head and lower leg with Electromagnetic flowmeter in both tilts before and after atropine state. Fourteen anesthetized dogs of $10{\sim}14kg$ were examined by tilting from supine position to $+77^{\circ}$ upright position (orthostasis), and then to $-90^{\circ}$ head-down position (antiorthostasis) for 10 minutes on each test. And the same course was taken 20 minutes after intravenous administration of 0.5mg atropine. The measurements were made of the blood flow(ml/min.) on the carotid artery, external jugular vein, femoral artery and femoral vein. At the same time pH, $PCO_2$, $PO_2$ and hematocrit (Hct) of the arterial and venous blood, and heart rate(HR) and respiratory rate (RR) were measured. The measurements obtained from upright and head-down tilt were compared with those from supine position. The results obtained are as follows: In upright tilt, the blood flow both on the artery and the vein through head and lower leg were decreased, however the decrement of blood flow through the head was greater than the lower leg And the atropine attenuated the decrement of the blood flow on the carotid artery, but not on the vessels of the lower leg. HR was moderately increased in upright tilt, but slightly in head-down tilt. The percent change of HR after the atropine administration was smaller than that before the atropine state in both upright and head-down tilts. Before the atropine state, RR was decreased in upright tilt, whereas increased in head-down tilt. However after the atropine state, the percent change of RR was smaller than that of before the atropine state in both upright and head-down tilts. In upright tilt, venous $PCO_2$ was increased, but arterial $PO_2$ and venous $PO_2$ were slightly decreased. Hct was increased in both upright and head-down tilts. The findings of blood $PCO_2$, $PO_2$ and Hct were not interferred by the atropine. In conclusion, 1;he administration of atropine is somewhat effective on improving the cardiovascular tolerance to postural changes. Thus, atropine attenuates the severe diminution of the blood flow to the head during orthostasis, and also reduces the changes of HR and RR in both orthostasis and antiorthostasis.

  • PDF

Sway buckling of down-aisle, spliced, unbraced pallet rack structures

  • Beale, R.G.;Godley, M.H.R.
    • Steel and Composite Structures
    • /
    • v.3 no.5
    • /
    • pp.307-320
    • /
    • 2003
  • This paper presents an efficient approach to the determination of the buckling loads of down-aisle, spliced, unbraced, pallet rack structures subjected to vertical and horizontal loads. A pallet rack structures is analysed by considering the stability equations of an equivalent free-sway column. The effects of semi-rigid beam-to-upright, splice-to-upright and base-plate-to-upright connections are fully incorporated into the analysis. Each section of upright between successive beam levels in the pallet rack is considered to be a single column element with two rotational degrees of freedom. A computer algebra package was used to determine modified stability equations for column elements containing splices. The influence of the position of splices in a pallet rack is clearly demonstrated.

Changes in Cervicocephalic Joint Position Sense in Sustained Forward Head Posture (지속적인 전방머리자세 시 머리-목 관절 위치 감각의 변화)

  • Jeong, Dawoon;Kim, Yongwook
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.5 no.2
    • /
    • pp.11-17
    • /
    • 2017
  • Purpose : The aim of this study was to verify differences in cervicocephalic joint position sense error after different sustained sitting postures in healthy young adults. Methods : Twenty-five healthy adults(12 men, 13 women) participated in this study. Repositioning errors of neck movement were observed in participants during joint repositioning tasks. During 2 test days with a 1-week interval, the participants performed forward head posture and upright sitting posture in random order. Both head-to-neutral(HTN) and head-to-target(HTT) tasks were performed on each day. On the first day, the participants sat slouched or upright for 10 minutes. Then, they sat upright and moved their heads at a self-selected speed with their eyes-closed to pre-determined neutral and target positions as accurately as possible. The participants noticed that when they reached a pre-determined position, the errors between pre-determined neutral and target positions and current position was recorded. The tasks consisted of flexion, extension and lateral bending. On the second day, the same test was performed after another sitting posture for 10 minutes. Repositioning error values were collected by using a smart phone-based inclinometer. The mean value for three trials was used for data analysis. A paired t-test was used for statistical analysis. Results : Significant differences in joint repositioning errors were found between the repositioning error after different sitting postures on the sagittal plane for both the HTN and HTT tasks (P<.05). No significant differences in errors on the coronal plane were found (P>.05). Conclusion : Cervicocephalic joint position sense can be affected by sitting postures, especially on the sagittal plane.

DEVELOPMENT OF A GARLIC CLOVE PLANTER

  • Park, W.K.;Kim, Y.K.;Choi, D.K.
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2000.11b
    • /
    • pp.438-445
    • /
    • 2000
  • Positioning garlic cloves in upright standing in garlic field has been regarded as a very important job because it affects clove rooting, growing and, eventually, quality and yield in garlic production, Because of the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual work that needs a tremendous human labors and increases garlic production cost. The overall objective of this research was to develop garlic planting machine through investigating physical properties of garlic and designing clove upright positioning device after figuring out the factors affecting metering device and upright clove positioning mechanism. With the outcomes of the metering and posture positioning experiment, a garlic clove planter having twelve planting rows was developed for 37kW type tractor and feasibility test was carried out in the field. And, According to the performance test and cost analysis, the planter could accomplish planting operation of one hectare plot in 6.3 hours giving 48 times better efficiency, 6.3hrs/ha, and 74.2% of production cost reduction effect, 1,092,546won/ha, than the manual works of 299hrs/ha and 282,258won/ha. And, break-even point ofthe planter was calculated as of 2.71 hectares.

  • PDF

Effect of Postpartum Outcomes in Mother's Upright Position During the Second Stage of Labor: Systematic Review (분만 2기 산모의 직립자세가 분만결과에 미치는 효과: 체계적 문헌고찰)

  • Park, Seong-Hi;Hwang, Jeong-Hae;Choi, Yun-Kyoung;Kang, Chang-Bum
    • Women's Health Nursing
    • /
    • v.18 no.3
    • /
    • pp.209-222
    • /
    • 2012
  • Purpose: The purpose of this study was to determine whether upright position is effective in labor through systematic review in randomized controlled trials. Methods: We established the PICO (Patient-Intervention-Comparator-Outcome) strategy, and reviewed 282 literatures from national and international electronic databases, and finally selected 9 references based on inclusion and exclusion criteria. We evaluated the quality of references and carried out a meta-analysis. Results: The maternal outcomes showed that the duration of their second-stage labor was 2.29 minutes shorter than that of the women in the recumbent position, and were less likely to have episiotomy. The other outcomes, including the mode of delivery, blood loss, hemoglobin level, use of oxytocin, use of analgesics, and perineal laceration, did not differ between the groups. The fetal heart rate abnormality occurred less than in the control group. The Apgar scores of the groups did not differ. Conclusion: There is evidence that an upright position in the second stage of labor reduces the duration of the second stage of labor, the incidence of episiotomy, and an abnormal fetal heart rate.

Control of a Rotary Inverted Pendulum System Using Brain Emotional Learning Based Intelligent Controller (BELBIC을 이용한 Rotary Inverted Pendulum 제어)

  • Kim, Jae-Won;Oh, Chae-Youn
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.22 no.5
    • /
    • pp.837-844
    • /
    • 2013
  • This study performs erection of a pendulum hanging at a free end of an arm by rotating the arm to the upright position. A mathematical model of a rotary inverted pendulum system (RIPS) is derived. A brain emotional learning based intelligent controller (BELBIC) is designed and used as a controller for swinging up and balancing the pendulum of the RIPS. In simulations performed in the study, a pendulum is initially inclined at $45^{\circ}$ with respect to the upright position. A simulation is also performed for evaluating the adaptiveness of the designed BELBIC in the case of system variation. In addition, a simulation is performed for evaluating the robustness of the designed BELBIC against a disturbance in the control input.