• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.51-58
• /
• 2010

English vowels play an important role in the daily communication between Korean students and international visitors. However, many Korean students still have difficulty producing them distinctively. Vowels vary according to shapes of oral and pharyngeal cavities, which are mainly determined by the degree of jaw opening and tongue position. Yang (2008a) proposed a simplified chart of English and Korean vowels for an educational purpose. He also suggested to use wooden chopsticks to secure distinguishable jaw openings. The purpose of this study is to tap whether wooden chopsticks can be applicable to a method for correcting English vowel pronunciation. Twelve male and female students participated in the recordings of eight /hVd/ words followed by additional recordings with wooden chopsticks between upper and lower teeth. The first and second formant trajectories of both natural and controlled vowel productions were obtained and compared at six equidistant measurement points using Praat. Results showed that the formant values of natural vowel productions were comparable to those of controlled productions. Vowels with similar formant trajectories of male students were separated with the aid of chopsticks. The width of each chopstick could be controlled similarly in the experiment. The author concludes that wooden chopsticks can be useful to correct vowel pronunciation. Further studies are desirable for native speakers to make perceptual evaluations of controlled vowel productions by nonnative speakers.

• 한방안이비인후피부과학회지
• /
• 제11권1호
• /
• pp.180-196
• /
• 1998

A Literatur Review of Physical and Breathing Exercises for Ear Health, the results were as follows. 1. The most common using way is rubbing your ears and auricle with warm palms. 2. To stimulate inner acoustic meatus, obstruct external acoustic meatus for a short time by the palm or fingers and then to stimulate it by the sudden opening. 3. This method is a common way to press aurical or orifice of external acoustic meatus for example, TE21(耳門), TE20(角孫), GB2(聽會), TE19(노息), TE18(계脈), GB11(竅陰), TE17(예風) etc. 4. The best time to pratice is early in the morning or before go to bed, but a litter difference by the writer's opinion, so there is not consistency. 5. Since tinnitus and hardness of hearing is related to the who1e body, it is known that you can relax your whole body by pressing the acupuncture points located in the head of occipital region or by stretching the upper half of the body. 6. There is method that obstruct your ears with palms and 3rd finger on your occipital region and splash by the 2th fingers.(sound the celestial drum)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.59-61
• /
• 1995

This paper presents the cogging torque analysis of the permanent magnet type AC servo motor which have the closed slot structure. Generally, existence of the slot opening causes the cogging torque. But the cogging torque exists in this type motor(having closed slot structure) because the bridge part is saturated by the rotor flux. In this paper, the finite element analysis is used to calculate the cogging torque and the rated torque. As the size of the bridge part-the thickness and the width-changes, the cogging torque and the rated torque are obtained repeatedly like as upper procedures. Finally, the trends of the cogging torque and the rated torque versus the size of the bridge part are obtained from this analysis procedures. By this approach, the optimal geometry of the bridge part can be found which minimize the cogging torque satisfying the required value of the rated torque.

• Composites Research
• /
• 제32권2호
• /
• pp.102-107
• /
• 2019

Several studies related to reinforce composites structures in the through thickness direction have been developed along the years. As follows, in this study a new reinforced process is proposed based on previous experimental results using a novel stitching process in T-joints and one-stitched specimens. It was established the need to perform more analysis under standard test methods to obtain a better understanding. FEM analysis were compared after performed mode I interlaminar fracture toughness test, using different stitching patterns to analyze the through thickness strength with reference laminates without stitching. The stitching patterns were defined in $2{\times}2$ and $3{\times}3$, where the upper and lower head of the non-continuous stitching process (I-Fiber) has proven to influence in a higher through thickness strength of the laminate. In order to design the numerical model, cohesive parameters were required to define the surface to surface bonding elements using the cohesive zone method (CZM) and simulate the crack opening behavior from the double cantilever beam (DCB) test.

• 한국지반신소재학회논문집
• /
• 제18권1호
• /
• pp.11-23
• /
• 2019

This paper presents the results of a three-dimensional numerical investigation into the mechanical mechanism of main tunnels and cross passage construction. Aimed at the complex space structure composed of two main tunnels and cross passage, 3D numerical model of the structure and surrounding rock was built to analyze the influence. Comparative analysis of different buried depths were carried out. The results of the study indicate that the stress concentration was occurred in the intersecting linings, especially in the opening side lining, which leads to an unfavorable form of force that is pulled up by the upper and lower sections in the intersecting linings due to the construction of the cross passage. The excavation of the cross passage also destroys the stability of the original soil layer and causes settlement of the surface and main tunnels. Practical implications of the findings are discussed.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.8-14
• /
• 2021

Even welds that have passed non-destructive testing in the case of brittle crack arrest steel materials will actually have very fine weld defects. Based on studies showing that these defects adversely affect the structure if subjected to a certain period of load, the following conclusions were obtained by conducting CTOD tests on welding joints of high-strength BCA materials, structures comprising the upper decks of a large container vessel. First of all, the fatigue pre-cracking in the weld metal and heat affected areas was tested and the behavior was identified. Both parts of the welding joint are allowable range for the class regulations. In addition, CTOD results showed that the CTOD value in the heat affected area was more than 0.5 times higher than in the weld metal area.

• 대한한의학원전학회지
• /
• 제35권1호
• /
• pp.155-172
• /
• 2022

Objectives : Contents on the 64 trigrams in major medical texts from early to late Joseon such as the Uibangyuchwi(醫方類聚), Donguibogam(東醫寶鑑), Somundaeyo(素問大要), Gyeokchigo(格致藁) were analyzed to examine their characteristics and historical context. Methods : Related contents in each medical texts were collected, sorted and analyzed for thorough examination. Results : The study of Changes which was widely applied in the field of medicine throughout the Joseon period focused more heavily on each of the trigram patterns, especially in regards to the qi interaction between the upper and lower axis of the body, rather than the various meanings of the ten wings[十翼]. This is a result of the Jing-Qi-Shen perspective of the body and the universe that transcends the Daoist inner cultivation method[內丹術], under which concepts related to qi circulation such as the opening and closing[闔闢] of the Heaven[乾] and the Earth[坤], the interaction between Water[水] and Fire[火] were considered more important. Conclusions : The historical context of the study of medicine and Changes[易] of Korea could be grasped through analysing the 64 trigrams in medical texts of each period in Joseon. Further research with the field of History of Changes studies is much anticipated.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• 한국수산과학회지
• /
• 제56권2호
• /
• pp.259-264
• /
• 2023

Day-night vertical euphausiid distribution was investigated at three stations in the East Sea using a Multiple Opening/Closing Net and Environmental Sensing System (MOCNESS). Three euphausiid species were recognized. Euphausia pacifica was more dominant than Thysanoessa longipes. Euphausiids were collected at Station 1 at night, Station 2 at sunset, and Station 3 during the daytime. At Station 1, calyptopis and furcilia stages were concentrated from the surface to 30 m and 20-40 m, respectively. Juveniles and E. pacifica were distributed in strata shallower than 30 m. At Station 2, calyptopis and furcilia stages were dominant in strata from the surface to 40 m. Juveniles were not recorded in strata at 30-100 m. However, E. pacifica occurred in these strata. At Station 3, calyptopis and furcilia stages occurred in the upper 40 m of strata. E. pacifica was distributed deeper than 100 m and rarely occurred above 100 m. The furcilia stages weakly migrated, whereas the calyptopis stages did not. Juveniles and E. pacifica showed a clear migration pattern. Vertical distribution of euphausiids in the northern East Sea varied by life stage and time of day.

• Steel and Composite Structures
• /
• 제51권1호
• /
• pp.63-72
• /
• 2024

This study delves into the interaction dynamics between lateral notches and inclusions, providing valuable insights for more effective engineering of structural components. By employing the finite element method, the research analyzes how inclusions affect the dimensions and contours of the plastic zone under confined plasticity conditions. Several parameters were investigated, including loading influence, the distance between the inclusion and notch tip, inclusion stiffness, and the distribution of Von Mises stress, as well as normal stresses σxx and σyy, and Comparison between different stresses. Examining stress distributions under varying loading conditions reveals a significant intensification, particularly near the crack tip. Moreover, the presence of an inclusion near the notch base reduces both the size and shape of the plastic zone. The distribution of the stresses for different loads knows an increase in intensity, especially near the crack head, which is the most requested by the tensile forces on its upper part, which can cause either the crack's initiation or opening, inducing significant stresses.