• Atmosphere
• /
• v.23 no.2
• /
• pp.187-204
• /
• 2013

This study analyzed the synoptic distribution and vertical structure about four cases of precipitation occurrences using NCEP/NCAR reanalysis data and upper level data of winter intensive observation to be performed by National Institute of Meteorological Research at Bukgangneung, Incheon, Boseong during 63days from 4 JAN to 6 MAR in 2012, and Observing System Experiment (OSE) using 3DVAR-WRF system was conducted to examine the precipitation predictability of upper level data at western and southern coastal regions. The synoptic characteristics of selected precipitation occurrences were investigated as causes for 1) rainfall events with effect of moisture convergence owing to low pressure passing through south sea on 19 JAN, 2) snowfall events due to moisture inflowing from yellow sea with propagation of Siberian high pressure after low pressure passage over middle northern region on 31 JAN, 3) rainfall event with effect of weak pressure trough in west low and east high pressure system on 25 FEB, 4) rainfall event due to moisture inflow according to low pressures over Bohai bay and south eastern sea on 5 MAR. However, it is identified that vertical structure of atmosphere had different characteristics with heavy rainfall system in summer. Firstly, depth of convection was narrow due to absence of moisture convergence and strong ascending air current in middle layer. Secondly, warm air advection by veering wind with height only existed in low layer. Thirdly, unstable layer was limited in the narrow depth due to low surface temperature although it formed, and also values of instability indices were not high. Fourthly, total water vapor amounts containing into atmosphere was small due to low temperature distribution so that precipitable water vapor could be little amounts. As result of OSE conducting with upper level data of Incheon and Boseong station, 12 hours accumulated precipitation distributions of control experiment and experiments with additional upper level data were similar with ones of observation data at 610 stations. Although Equitable Threat Scores (ETS) were different according to cases and thresholds, it was verified positive influence of upper level data for precipitation predictability as resulting with high improvement rates of 33.3% in experiment with upper level data of Incheon (INC_EXP), 85.7% in experiment with upper level data of Boseong (BOS_EXP), and 142.9% in experiment with upper level data of both Incheon and Boseong (INC_BOS_EXP) about accumulated precipitation more than 5 mm / 12 hours on 31 January 2012.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.4
• /
• pp.113-128
• /
• 2016

This paper proposes a Bi-level Genetic Algorithm for the Fixed Charge Transportation Problem with Non-linear Unit Cost. The problem has the property of mixed integer program with non-linear objective function and linear constraints. The bi-level procedure consists of the upper-GA and the lower-GA. While the upper-GA optimize the connectivity between each supply and demand pair, the lower-GA optimize the amount of transportation between the pairs set to be connected by the upper-GA. In the upper-GA, the feasibility of the connectivity are verified, and if a connectivity is not feasible, it is modified so as to be feasible. In the lower-GA, a simple method is used to obtain a pivot feasible solution under the restriction of the connectivity determined by the upper-GA. The obtained pivot feasible solution is utilized to generate the initial generation of chromosomes. The computational experiment is performed on the selected problems with several non-linear objective functions. The performance of the proposed procedure is analyzed with the result of experiment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.4
• /
• pp.613-623
• /
• 2022

This study developed a functional prototype jacket designed to reduce loads on the upper extremities of workers performing repetitive motions in the same posture for extended periods of time. Dynamic taping lines were applied to the upper extremities, and three dimensional (3D) supporters were inserted in the abdomen and back waist areas corresponding to the core muscles. Clothing pressure on the upper-extremity dynamic taping lines was set to two levels (proto P1 and proto P2), and the 3D supporters were designed in three types (proto FW, proto FW/BW, proto FW/BW/BBX). According to the subjective pressure perceived on each part of the upper extremities, the level proto P1 pressure was preferred. The proto FW/BW/BBX 3D supporter was rated as excellent, and the perceived pressure was ranked as satisfactory. The prototype jacket performed upper-extremity load reduction when the upper-extremity clothing-pressure level was set to 1.8 kPa, 2.1 kPa, and 2.4 kPa on the upper arm, forearm, and wrist regions, respectively, and when 3D supporters were installed in the abdomen and back of the waist with the addition of a back band.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.105-111
• /
• 2017

Vendor Managed Inventory is a well-known vendor-retailer coordination approach in supply chain management where the vendor manages inventory of the retailer and determines the order interval and order quantity for the retailer. To consider practical situation, the upper limit of inventory for the retailer is set. If the inventory level for the retailer exceeds the upper limit, then the penalty cost is charged to the retailer. Furthermore, maximum allowable inventory level is set for the vendor to prevent the vendor from keeping much inventory. Single-vendor multi-retailer supply chain model with upper limit of inventory for vendor and retailers is studied. All the retailers' are assumed to have the common cycle time, and a vendor manages retailers' inventory and replenishes products. The mathematical formulation is introduced to minimize the total cost including the penalty cost violating the upper limit of inventory for retailers with the constraint of maximum allowable inventory level. The solution procedure based on Karush-Kuhn-Tucker (KKT) conditions is derived. KKT conditions are often applied to find an optimal solution of nonlinear programming problem with constraints. An illustrative example is used to show the application of the proposed solution procedure. Furthermore, sensitivity analysis is done to find out the relationship between maximum allowable inventory level and other values such as order quantity, the number of shipment, vendor's cost, retailer's cost, and total cost. As maximum allowable inventory level decreases, the number of shipment decreases but total cost increases. Order quantity has the trend of decline and is affected by the number of shipment.

• Journal of Environmental Science International
• /
• v.3 no.4
• /
• pp.305-315
• /
• 1994

The field observation was carried out to investigate the characteristics of surface inversion layer at Kimhae using the feild observed date and upper layer meteorological data during 4-5 February 1993. The results of the study can be summarized as follows : The maximum height of surface inversion layer observed at Kimhae is 193m and the height of upper level inversion layer ranges from 2nm to 300m. The surface weather elements was influenced the formation of surface inversion layer. According to the pasquill stability and time variation of temperature with height, both the surface heating from insolation and the disturbance of upper level of inversion layer was influenced the disappearance of inversion layer. And the stability of surface temperature inversion layer generally belongs to the class of F, that of upper level temperature inversion layer commonly to the class of E.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.10
• /
• pp.259-267
• /
• 2021

Both structural transformation and education are the predominant subjects in the literature of development economics. This study examines the relationship between education before the tertiary level and the structural transformation of provinces by using Vietnam as a case study. In this study, education before the tertiary level would be disaggregated into three groups: primary, lower secondary, and upper secondary, then analyzed simultaneously on three-panel data models. Research data is taken from the statistical yearbook of provinces in Vietnam for 2015-2018. Research results show that education before the tertiary level plays a vital role in structural transformation. The enrolment rate of various education levels has a different influence on economic structure, and the lower secondary level has more significant effects than the upper secondary level. This reflects that participating in lower secondary is a fundamental requirement for taking some jobs in the non-agriculture sector, while upper secondary helps to upgrade the learner's abilities to respond to higher requirement jobs. The high rate of repeaters in upper secondary education will slow down the structural shift towards non-agriculture, and changing the traditional attitude about repeaters plays an essential role in improving this rate.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2005

Evaluation of repetitiveness for upper extremity intensive tasks is essential to determine the level of risk for upper extremity musculoskeletal disorders at the workplace. However, experimental data available to establish the acceptable levels of repetitiveness for various postures and forces is lacking. The present study examined the maximum acceptable frequencies(MAFs; motions/min.) of shoulder, elbow, wrist, and index finger motions at different forces(1kgf and 4kgf for shoulder, elbow, and wrist; 0.25kgf and 1 kgf for index finger) in sitting. Seventeen right-handed males in 20s without having any history musculoskeletal disorders participated in the MAF experiment. The participants determined their MAFs for the upper extremity motions by using the self-adjustment method and their work pulse(increase in heart rate; beats/min.) and rating of perceived exertion(RPE) were measured when working at MAF. The MAFs of elbow, wrist, and index finger motions for each force level were about 2, 3, and 6 times the corresponding MAF(9 at the high force and 24 at the low force) of shoulder motion and the MAFs at the low force increased about 2 times those at the high force. The work pulses of elbow, wrist, and index finger motions for each force level were 70%, 50%, and 30% of the corresponding work pulse(17 at the high force and 12 at the low force) of shoulder motion and the work pulses at the low force were about 70 % of those at the high force. Lastly, the RPEs of the upper extremity regions were about level 3(moderate) or below.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.5
• /
• pp.897-908
• /
• 2012

Objectives : This study was purposed to estimate prevalence of upper extremity musculoskeletal symptoms, level of occupational stress and their relationship among dental hygienists. Methods : This questionnaire study was performed during May to October 2010 with 317 dental hygienists worked in Busan and Gyeongsangnam-do recruited as study population. The occupational stress and upper extremity musculoskeletal symptoms were accessed using questionnaire of the Korean Occupational Stress Scale and musculoskeletal symptoms from the Korea Occupational Safety Health Agency. Data analysis was performed with the descriptive analysis, chi-square test, and multiple logistic regression analysis using SPSS(ver 19.0K)program. Results : The prevalence of upper extremity musculoskeletal symptoms and the level of occupational stress were 79.2% and $52.67{\pm}4.86$ in dental hygienists. By multiple logistic regression analysis, job insecurity(OR=2.86, 95% CI: 1.38-5.94 in stress high risk group; reference-stress low risk group) and organizational system(OR=3.32, 95% CI: 1.55-7.08 in stress high risk group; reference-stress low risk group) were associated with upper extremity musculoskeletal symptoms in dental hygienists. Conclusions : The overall prevalence of upper extremity musculoskeletal symptoms and level of occupational stress in dental hygienists were relatively high and some sub-scales of occupational stress were related with upper extremity musculoskeletal symptoms. Not only previously reported risk factors of musculoskeletal symptoms but also occupational stress should consider to prevent and improve upper extremity musculoskeletal symptoms in dental hygienists.

• Physical Therapy Korea
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2022

Background: Neck pain is a major health problem in developed countries and has a lifetime prevalence of 50%. Major problems include a reduced cervical range of motion, muscle stiffness, dysfunction, postural changes, and decrease in psychosocial level. Objects: This study aimed to investigate the effects of applying the upper trapezius inhibition dynamic taping to patients with chronic neck pain on their neck pain, functional level, cervical range of motion, psychosocial level, and neck posture. Methods: The study design was a randomized controlled trial. A total of 40 patients with neck pain participated in this study and were randomly assigned to a Dynamic Taping group (n = 20) or Sham Taping group (n = 20). In both groups, basic intervention cervical pain control therapy and shoulder stabilization exercise program were performed. In addition, dynamic taping and sham taping were applied to participants in the Dynamic Taping and Sham Taping groups to inhibit the trapezius muscle, respectively. All interventions were performed three times a week and a total of 12 times for 4 weeks, and the participants' neck pain, functional impairment level, cervical range of motion, psychosocial level, and neck posture were measured and compared before and after the intervention. Results: Both groups showed significant differences in neck pain, functional level, cervical range of motion, psychosocial level, and neck postural before and after the intervention (p < 0.05). Moreover, there were significant differences between the two groups regarding the functional level and neck posture (p < 0.05). Conclusion: Inhibition dynamic taping of the upper trapezius muscle suppression is an effective method with clinical significance in reducing pain in individuals with chronic neck pain and improving the functional level, cervical range of motion, psychosocial level, and neck posture.

• Nuclear Engineering and Technology
• /
• v.16 no.3
• /
• pp.125-130
• /
• 1984

In the application of the RETRAN code to the analysis of very small LOCA one of main concerns is placed on use of the bubble rise model in the upper plenum, because the bubble rise model nay cause a numerical divergence problem and coefficients used to describe it are based on experimental results of large LOCA. In order to solve this problem, a method, which enables us to predict the mixture level in the upper plenum without use of the bubble rise model, was proposed. For this method the local void distribution in the core and upper plenum was derived by using a simplified slip model. It was shown that results predicted from the derived equation are in excellent agreement with experimental data. Additionally it was found that local void in the upper plenum has a uniform distribution unlike a linear distribution in large LOCA. Communication between the upper plenum and upper head was investigated. By introducing the concept of Taylor instability, it was proved that counter-current Hon between them is possible.