• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.152-160
• /
• 2011

Purpose: The aim of this study was to evaluate the volumetric change of teeth after preparation for various designs and margin locations through Micro CT analysis (Skyscan 1076: SKYSCAN, Konitch, Belgium). Materials and methods: The 36 artificial teeth were used to determine reduction volume of upper central incisor. According to the restorative design these 36 teeth were divided into 4 groups and according to the marginal location each group was divided into 3 subgroups. The volume of unprepared teeth was obtained by using Micro CT and the volume of prepared teeth was obtained in the same method. The CT scanned images before and after preparation were superimposed. Results: The volume difference was significantly increased as follows: traditional laminate veneer < full laminate veneer < all ceramic crown < metal ceramic crown. One-way ANOVA and Tukey multiple comparison analyses were used to analyze the data in this study. In each group the volume difference was significantly increased as follows: 1 mm above CEJ < CEJ < 1 mm below CEJ (P<.05). The % volume difference of all ceramic crown and metal ceramic crown was 31 - 48% and that of laminate veneer was 14 - 30%. The volume difference of the traditional laminate veneer was 1/3 of that of metal ceramic crown. The full laminate (1 mm below CEJ) and all ceramic crown (1 mm above CEJ) showed a similar volume difference. Metal ceramic crown showed 13.7% more volume difference than all ceramic crown. Conclusion: There exists the difference in volumetric change according to designs of restoration and margin locations of preparation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.385-390
• /
• 2003

Traumatic injuries in the young permanent dentition are common, but root fractures, defined as fractures involving dentin, cementum and pulp, are relatively uncommon. Appropriate management of root fracture involves repositioning the coronal portion of the tooth fragment and firm immobilization with a splint for 2 to 3 month. Root canal treatment should not be initiated until the sign of necrosis or resorption are apparent because in most cases, the apical fragments maintain their vitality. The following case report describes a patient with root fractures injured three times over the period of 7 years. The results, clinically and radiographically, were acceptable, but long term periodic evaluation is required.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

• Journal of dental hygiene science
• /
• v.9 no.5
• /
• pp.563-570
• /
• 2009

This study carried out the survey of the actual condition targeting 303 patients with execution of treatment after medical examination among patients who visited from January 2, 2008 to December 31, 2008 at dental hospital where is located in K region, and analyzed by using a program of SPSS13.0. The ratio of treatment in posterior was high with 76.9% in central incisor, 62.3% in the 1st bicuspids, and 45.3% in the first permanent molars as for health in the right teeth of maxillary, and with 77.9% in central incisor, 64.4% in the 1st bicuspids, and 47.6% in the first permanent molars as for the left teeth. In the lower jaw, the ratio of treatment in posterior was high with 92.1% in central incisor, 73.9% in the 1st bicuspids, and 42.6% in the first permanent molars as for health in the right teeth, and with 92.1% in central incisor, 75.9% in the 1st bicuspids, and 43.2% in the first permanent molars as for the left teeth. The upper left cuspid was treated in older patients by age(${\chi}^2=32.33$, p=0.000), in the more patients with high blood pressure(${\chi}^2=12.60$, p=0.000), and in case of systemic disease. The significant difference was shown(${\chi}^2=6.37$, p=0.012). The older patients led to being treated cuspid among right teeth in the lower jaw. The significant difference was shown according in the more patients with high blood pressure(${\chi}^2=8.26$, p=0.004). The left cuspid in the lower jaw was treated in the older patients by age the statistically significant difference was shown(${\chi}^2=12.10$, p=0.007).

• Journal of Korean Dental Science
• /
• v.2 no.2
• /
• pp.18-23
• /
• 2009

Introduction : The purposes of this study were to analyze the differences between the anterior and posterior overjets using bracket slot points, and compare two methods of overjet calculation according to different reference points using clinical bracket points on three-dimensional digital models. Methods : A total of 35 normal occlusion models were scanned using a three-dimensional scanner (Orapix$^{(R)}$, Orapix Co., Ltd, Seoul, Korea) and then, virtual brackets (0.022" Slot MBT preadjusted brackets, 3 M Co.CA. USA) were placed on the digital models using virtual setup program (3Txer$^{(R)}$ ver. 1.9.6, Orapix co., Ltd). Archwire-like curves were designed to analyze labial and buccal overjet. Results : There were no statistically significance differences between the right and left overjet and between genders. The average overjet was found to be $1.67{\pm}0.85mm$ at the central incisor area, $2.16{\pm}0.88mm$ at the second premolar and $1.53{\pm}0.71mm$ at the first molar. Conclusion : It is recommended that overjet of individualized upper and lower arch to be 2.0mm at the anterior and posterior teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.7 no.1
• /
• pp.41-45
• /
• 1980

The term "Oligodontia" or "Hypodontia" have been used to describe variable degrees of reduction in number of teeth. Oligodontia may occur alone or as a result of some syndrome. Although the teeth are derived in part from ectoderm, the current opinion of reason of oligodontia should be reserved for those disorders in which there is abnormal development of one or more ectodermal tissues. 7 year 5 months old female was refered to the department of pedodontics, college of dentistry Yonsei university for evaluation and replacement of absent teeth. She had no special inf.ectious disease in her childhood, and her parents were healthy. She had no special syndrome of ectodermal disorders except the saddle nose, yellow and fine hair, and notched upper anterior central incisor. Panex radiogram was showing 6 anterior primary teeth, 2 permanent first molars and 2 unerupted first bicuspid in mandible. Another permanent teeth were absent. and normal number of primary and permanent teeth in maxilla. Lateral cephalogram showed no special abnormality in growth pattern. We had evaluated lower anterior decayed teeth with jacket resin and chrome steel crown and removable partial denture at missing area. We had got good results for rehabilitation of function and aesthetic.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.1
• /
• pp.43-48
• /
• 2003

During the past several years, significant advances have occurred in the utilization of osseointegrated implants for the treatment of partially edentulous patients. One of the biggest purposes for treating of these patients is the high demand for improved esthetics, especially in the anterior region. For this esthetics, the new trend in dental implants is the immediate placement and immediate superstructure fabrication. The refined surgical technique, the skillful soft tissue management, and the proper prosthetic coordination are the main factors to achieve natural looking of implant supported prosthesis. The customized provisional restoration and the customized impression coping are recommended for the optimal peri-implant soft tissue contour. The basic concept of Frialit 2 system was the immediate replacement of a tooth with root-analog fixture after extraction. This system guarantees an ideal result in function and esthetics. The ceramic abutment system offers improved quality in the respect of esthetics, fitness, translucency, and biocompatibility. In this clinical report, the final restoration made with IPS Empress 2 crown on the CeraBase abutmen of Frialit 2 system allowed the reproduction of the natural vitality of tooth and adjacent gingiva.

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.29.1-29.9
• /
• 2020

This study describes the clinical steps taken in the treatment of a patient who had an avulsed right upper central incisor that presented with incomplete root development and chronic apical periodontitis. A 7-year-old boy was referred from a private dentist to a dental office specializing in endodontics. The tooth had remained in a dry environment for 20 minutes, and tooth replantation was performed at an emergency appointment. After clinical and radiographic examinations, root canal decontamination was performed, followed by several changes in intracanal calcium hydroxide medication. Blood clot formation was attempted, but bleeding within the root canal was insufficient; therefore, we opted for an intracanal medication change to stimulate mineralized tissue formation in the apical region. Root obturation was performed 45 days after the last change of intracanal medication, and clinical, radiographic, and tomographic follow-up examinations were performed at 3, 6, 18, and 40 months after the endodontic intervention. The increase in thickness and length of the root structure and the absence of root resorption were verified through follow-up examinations. Therefore, it was concluded that the procedures used were successful for tooth replantation.

• The korean journal of orthodontics
• /
• v.51 no.2
• /
• pp.135-141
• /
• 2021

Objective: To assess the effects of thermoforming on aligner thickness and gap width in six aligner systems with the same nominal thickness. Methods: Six passive upper aligners of different brands were adapted to a single printed cast. Each sample was evaluated with high-resolution micro-computed tomography. To investigate aligner thickness and gap width, two-dimensional (2D) analysis was conducted assessing the effects of the following variables: tooth type (central incisor, canine, and first molar), 2D reference points, and aligner type. Data were analyzed and compared using analysis of variance and Tukey's post-hoc tests (p < 0.05). Results: Tooth type, dental region, and aligner type affected both the gap width and aligner thickness. The aligner thickness remained moderately stable across the arch only in the F22. Conclusions: All thermoformed samples displayed smaller aligner thickness and gap width at anterior teeth and both gingival and coronal centers than at posterior teeth and occlusal surfaces.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.43.1-43.9
• /
• 2020

A variety of therapeutic modalities can be used for the endodontic treatment of a traumatized tooth with internal root resorption (IRR). The authors present a case report of the successful restoration of a traumatized upper central incisor that was weakened due to severe IRR and subsequent periapical lesion formation. A 20-year-old female patient was referred to our clinic with severe internal resorption and subsequent periapical pathosis destroying the buccal bone wall. Root canal treatment had been initiated previously at another dental practice, but at that time, the patient's condition could not be managed even with several treatments. After cone-beam computed tomography imaging and proper chemomechanical cleaning, the tooth was managed with a mineral trioxide aggregate plug followed by root canal filling using short fiber-reinforced composite, known as the Bioblock technique. This report is the first documentation of the use of the Bioblock technique in the restoration of a traumatized tooth. The Bioblock technique appears to be ideal for restoring wide irregular root canals, as in cases of severe internal resorption, because it can uniquely fill out the hollow irregularities of the canal. However, further long-term clinical investigations are required to provide additional information about this new technique.