• 제목/요약/키워드: Upper body postures

검색결과 67건 처리시간 0.023초

문헌조사에 기반한 OWAS, RULA 및 REBA의 연구 현황 및 비교 (Review and Comparison of OWAS, RULA and REBA Based on Literature Survey)

  • 기도형
    • 대한안전경영과학회지
    • /
    • 제23권2호
    • /
    • pp.31-36
    • /
    • 2021
  • This study aims to review observational methods for assessing postural loads such as OWAS, RULA and REBA, and to compare them, based on the literature survey. The literature was searched through academic database of ScienceDirect using the key words of observational methods, OWAS, RULA and REBA. The results exhibited that of the thee methods, RULA was cited in the literature and applied to manufacturing industries the most frequently. Although it has been known that RULA is appropriate for assessing upper body postures, it has been applied to healthcare and social work activities, agriculture, forestry, fishing, construction, mining and quarrying, which require unstable lower limb postures. The countries where more number of relevant studies have been carried out were USA, India, Brazil, UK, etc. It was recommended that of the three techniques, RULA may be better for assessing postural loads, because it evaluated postural loads more highly, irrespective of industry, work type and lower limb postures, and its assessment results had higher agreement rate with experts' assessments than those of OWAS and REBA. It is expected that the results of this study will be used as a guideline for selecting an appropriate observational method.

소방대원들의 근골격계질환 예방을 위한 작업 자세 분석 (Analysis of Work Postures of Fire Fighters for Prevention of Musculoskeletal Disorders)

  • 노효련;손성민;오현수;장성록;김용재
    • 한국안전학회지
    • /
    • 제26권6호
    • /
    • pp.71-78
    • /
    • 2011
  • The aim of study was to reduce risk factors of musculoskeletal disorders, and prevent it according to evaluation and analysis of its symptoms survey, and work postures which doing much frequently. This study was conducted by 64 firefighters. It was surveyed physical burden levels, distribution of musculoskeletal symptoms, and analized work postures by using ergonomics tools, such as Rapid Entire Body Assesment(REBA), Rapid Upper Lim Assessment(RULA), NIOSH Lifting Equation(NLE). Physical burden levels, and distribution of musculoskeletal symptoms were surveyed according to frequency analysis, and the analysis of above tools were presented figures and scores. The all the results of REBA were that risk level was "High", action level was "Need soon" and the results of RULA were "The results are required detailed survey and immediate improvement" at Require rescue person handling, fire hose, hybraulic rescue equipment, universal axe work postures. The occurrence possibility of musculoskeletal disorders of fire fighters is quite high due to instability postures, excessive physical work and so on. Thus, making various efforts to prevent disorders, and improving working environment is necessary continuously.

근골격계 부하 평가를 위한 2차원 자세 측정 시스템 개발 (Development of a 2D Posture Measurement System to Evaluate Musculoskeletal Workload)

  • 박성준;박재규;최재호
    • 대한인간공학회지
    • /
    • 제24권3호
    • /
    • pp.43-52
    • /
    • 2005
  • A two-dimensional posture measurement system was developed to evaluate the risks of work-related musculoskeletal disorders(MSDs) easily on various conditions of work. The posture measurement system is an essential tool to analyze the workload for preventing work-related musculoskeletal disorders. Although several posture measurement systems have been developed for workload assessment, some restrictions in industry still exist because of its difficulty on measuring work postures. In this study, an image recognition algorithm was developed based on a neural network method to measure work posture. Each joint angle of human body was automatically measured from the recognized images through the algorithm, and the measurement system makes it possible to evaluate the risks of work-related musculoskeletal disorders easily on various working conditions. The validation test on upper body postures was carried out to examine the accuracy of the measured joint angle data from the system, and the results showed good measuring performance for each joint angle. The differences between the joint angles measured directly and the angles measured by posture measurement software were not statistically significant. It is expected that the result help to properly estimate physical workload and can be used as a postural analysis system to evaluate the risk of work-related musculoskeletal disorders in industry.

Ergonomic and performance analysis of rail-type boom sprayer for agro-photovoltaic power system

  • Rack-Woo Kim;Jae-Woong Han;Woong Kim
    • 농업과학연구
    • /
    • 제49권1호
    • /
    • pp.151-162
    • /
    • 2022
  • This study was conducted to develop a rail-type boom sprayer, performing safe spraying with improved ergonomic postures during pesticide spraying of agro-photovoltaic power system. The sprayer was designed to reduce labor cost and to be safe from pesticide exposure, and was analyzed through a comparison with a conventional spray method. The rail-type boom sprayer, consisted of a self-propelled spray and hose winder, hose, and boom sprayer parts, was designed to automatically pull and spray in the vertical and horizontal directions. The performance of the sprayer for an agro-photovoltaic power system was appropriate. From the analysis of postures with the Ovako Working posture Analysis System (OWAS), Rapid Entire Body Assessment (REBA), and Rapid Upper Limb Assessment (RULA) methods, the musculoskeletal risk factors to the body using the rail-type boom sprayer were less than those with the conventional power sprayer. In addition, the possibility of pesticide poisoning was reduced compared to the conventional power sprayer. The working capacity with the rail-type boom sprayer was more than five times greater, compared with the conventional power sprayer. After performing pesticide spraying with the rail-type boom sprayer, the labor cost was reduced to 42,750 won·yr-1, which was 90% (402,750 won·yr-1) less than the cost with the use of a conventional power sprayer (445,500 won·yr-1).

3차원 인체데이터에 의한 20대 성인남성 상반신 체표변화 분석 - 모터사이클복 패턴설계시 적용을 중심으로 - (Analysis of Body Surface Change from 3D Scan Data of Men's Upper Bodies in Twenties - Focus on Application of Motorcycle Jacket Pattern -)

  • 도월희
    • 한국의류학회지
    • /
    • 제32권4호
    • /
    • pp.530-541
    • /
    • 2008
  • The early stage of 3D anthropometry data has been used to obtain qualitative rather than quantitative information. However recent 3D body scanners as a common research tool for anthropormatric measurments have made it possible to obtain body surface data of sufficient resolution and accuracy. The purpose of this study is finally to develop motorcycle jacket for enhanced comfort and fit, to test the accuracy and reliability of 3D measurments of motorcycle riding posture, and to analyze the change in 20's adult male's body surface measurements between the standard anthropometric position and motorcycle riding posture. The results of this study were as follows: There were no significant differences between the study and Size Korea measurments in total traditional measuring items and most of measuring items, such as length, circumference antropometric items and interscye items though not waist back length and upper arm circumference. A comparison of 3D body surface measurments in the two different measuring postures, the bodysurface measurments such as waist front length, biacromion length, front interscye, arm length, underarm length in the motorcycle riding posture decreased than that in basic posture, whereas waist back length, back interscye, C.T.W length increased. The body surface measurments such as chest, bust, upper circumference in the motorcycle riding posture decreased than that in basic posture, whereas neck, waist, hip, elbow circumference increased.

한국 여성 노인 3D 스캔 데이터를 활용한 피트니스 동작별 체표면적 분석 (Analysis of Body Surface Area by Fitness Motion Using 3D Scan Data of Korean Elderly Female)

  • 전은진;정하영;김희은;유희천
    • 한국의류산업학회지
    • /
    • 제22권5호
    • /
    • pp.650-659
    • /
    • 2020
  • The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

3차원 스캔 기술과 니트 소재의 신축성을 적용한 밀착형 스포츠웨어 상의 설계 (Technical Design of Tight Upper Sportswear based on 3D Scanning Technology and Stretch Property of Knitted Fabric)

  • 김태규;박순지;박정환;서추연;최신애
    • 한국의류산업학회지
    • /
    • 제14권2호
    • /
    • pp.277-285
    • /
    • 2012
  • This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

전신조정술 중재가 자세조절에 미치는 효과 (The Effects of General Coordinative Manipulation Interventions on the Postural Control)

  • 문상은;김미화;주왕석;이수홍;오창선;최민호;정웅채
    • Journal of Acupuncture Research
    • /
    • 제26권5호
    • /
    • pp.137-149
    • /
    • 2009
  • Objectives : This study was designed to analyze whether General Coordinative Manipulation(GCM) Intervention could have effects on the balanced restoration of asymmetrical posture. Methods : Sixty eight(68) healthy volunteers(1st hypothesis: 46, 2nd hypothesis 22) participated in two GCM interventions, which have been performed 2 times a week for 3 weeks. The Global Postural System(GPS) Unit was used to measure the posture, and measurements were performed before and after the application of each intervention group. A paired t-test and wilcoxon test were used to determine the statistical significance. Results : The outcome of examining the hypothesis is as follows: 1. The 1st hypothesis: It has been proved that GCM Intervention, which coordinates the flexion type of upper extremity and the extension type of lower extremity, excluding self-care, shows the efficiency in treatment on more than two aspects of 3 parts: anterior, posterior and lateral postures, and the effects on more than 3 of 4 body types. 2. The 2nd hypothesis: It has been proved that GCM Intervention, which coordinates the flexion type of lower extremity and the extension type of upper extremity, excluding self-care, shows the treatment in efficiency on more than two aspects of 3 parts: anterior, posterior and lateral postures, and the effects on more than 2 of 3 body types. Conclusions : GCM intervention programs on the two hypothesis groups have an affect on the balanced restoration of the postural control system.

  • PDF

비대칭 들기 작업의 3차원 시뮬레이션 (Simulation of Whole Body Posture during Asymmetric Lifting)

  • 최경임
    • 대한안전경영과학회지
    • /
    • 제4권2호
    • /
    • pp.11-22
    • /
    • 2002
  • In this study, an asymmetric lifting posture prediction model was developed, which was a three-dimensional model with 12 links and 23 degrees of freedom open kinematic chains. Although previous researchers have proposed biomechanical, psychophysical, or physiological measures as cost functions, for solving redundancy, they lack in accuracy in predicting actual lifting postures and most of them are confined to the two-dimensional model. To develop an asymmetric lifting posture prediction model, we used the resolved motion method for accurately simulating the lifting motion in a reasonable time. Furthermore, in solving the redundant problem of the human posture prediction, a moment weighted Joint Range Availability (JRA) was used as a cost function in order to consider dynamic lifting. However, it is known that the moment weighted JRA as a cost function predicted the lower extremity and L5/S1 joint motions better than the upper extremities, while the constant weighted JRA as a cost function predicted the latter better than the former. To compensate for this, we proposed a hybrid moment weighted JRA as a new cost function with moment weighted for only the lower extremity. In order to validate the proposed cost function, the predicted and real lifting postures for various lifting conditions were compared by using the root mean square(RMS) error. This hybrid JRA reduced RMS more than the previous cost functions. Therefore, it is concluded that the cost function of a hybrid moment weighted JRA can be used to predict three-dimensional lifting postures. To compare with the predicted trajectories and the real lifting movements, graphical validations were performed. The results also showed that the hybrid moment weighted cost function model was found to have generated the postures more similar to the real movements.

19세기 후반 영국 여성복 상의 착용에 따른 인체 실루엣 변화 (A Study on Body Silhouette Change by Wearing English Women's Upper Garments of the Late $19^{th}$ Century)

  • 차주은;천종숙
    • 복식문화연구
    • /
    • 제19권6호
    • /
    • pp.1205-1220
    • /
    • 2011
  • The purpose of this study is to verify the change of body posture by putting on the late $19^{th}$ century English women's bodice or waistcoat. This study analyzed the female somatotype which puts on upper garments of Victorian era with using 3D body scan technology. Two sets of $19^{th}$ century women's bodice and waistcoat patterns were developed with the $19^{th}$ century model size and those patterns were used for making the experimental garments. The fit of experimental garments was evaluated by the degree of change with posture and waist measurements. Three women with the same waist girth measurements with the model size were participated to the fitting test. The postural change was measured from cross-sectional body diagrams. The result of this study showed that the waist measurement of the late $19^{th}$ century English women's bodice and waistcoat pattern was smaller than the waist girth measurement. These garments compressed the midriff of the body and it made women's distinct body silhouette. The waist girth measurement of 1876 bodice pattern was 9.2cm smaller than presented model size. The subjects' waist girth measurements were shortened by 5.0~6.1cm after wearing the 1876 bodice garment. The waist girth measurement of 1880 waistcoat pattern was 7.1cm smaller than presented model size. The subjects' waist girth measurements were shortened by 2.7~3.7cm after wearing the 1880 waistcoat garment. The back side parts of their waist were compressed and their postures were changed. The neck and shoulders were moved forward after wearing the experimental garments. These results showed that body posture could be changed to "S" shape silhouette as wearing the late $19^{th}$ century English women's bodice or waistcoat.