본 논문에서는 2.6 GHz 대역에서 WCDMA (Wideband Code Division Multiple Access) 시스템과 M-WiMAX (Mobile-Worldwide Interoperability for Microwave Access) 시스템 모두 SISO (Single Input Single Output) 만을 적용한 상태에서, 상호 시스템 간에 미치는 간섭의 영향을 분석한다. 간섭이 발생하는 경우는 각 시스템 별로 네 가지로써, 총 여덟 가지의 경우가 존재한다. 그 중에서도 간섭원의 하향링크가 피간섭원의 상향링크에 미치는 간섭의 크기가 가장 심각한 경우임을 밝히며, 간섭의 영향을 최소화하기 위해 여덟 가지 경우 모두에 5MHz 의 보호대역을 적용한다. 특히 M-WiMAX 시스템이 피간섭원인 경우가 WCDMA 시스템이 피간섭원인 경우에 비해 더 많은 간섭이 발생하며, 이는 두 시스템간의 최대 송신 전력의 차이가 주된 원인으로 작용한다. 본 논문에서는 실질적인 상황과는 다르게 Spectrum Mask 내에 간섭원에 해당되는 시스템의 송신전력이 가득 채워져 있는 경우로 가정하였기 때문에, 보다 엄격한 Emission Mask를 사용하고 실질적인 시스템 간 간섭분석의 Worst-case 결과로 볼 수 있다.
본 논문에서는 전이중(full duplexing) 모드로 동작하는 기지국과 시분할 이중(TDD: Time Division Duplexing) 모 드로 동작하는 사용자들이 통신하는 전이중 무선 셀룰라 네트워크를 고려한다. 전이중 모드 사용시 상향링크 사용자 는 하향링크 사용자에게 간섭을 유발하므로 시스템 성능을 극대화하기 위해서는 같은 무선 자원을 동시에 사용하는 상 하향링크 사용자 쌍을 어떻게 결정하는 지가 매우 중요하다. 본 논문은 셀 용량을 최대화하기 위한 최적화 문제 를 제시하고 낮은 복잡도를 갖는 차선의 사용자 스케쥴링 알고리즘을 제안한다. 제안하는 스케쥴링 방식은 더 좋은 신호 품질을 갖는 하향링크 사용자가 자신에게 간섭을 덜 미치게 하는 상향링크 사용자를 먼저 선택할 수 있도록 우 선권을 갖는 방식으로 동작한다. 시뮬레이션 결과 제안 사용자 스케쥴링 방식을 사용하는 전이중 시스템은 최적 성 능을 달성하면서 기존 TDD 시스템의 셀 용량을 현저히 개선한다.
논문에서는 최근에 무선 센서 관련 연구에서 제안된 높은 정확도를 가진 센서 간의 클락 동기 기술을 멀티스태틱 레이더 시스템을 위한 무선 시간동기 알고리즘에 적용을 고려하고 특히 비가시선 상에 있는 노드들 간에 적용 될 수 없는 기존 이론의 한계를 극복하는 알고리즘을 제안한다. 제안된 알고리즘에서는 두 노드에서의 얻어진 타임 스탬프 관찰 결과 정보를 바탕으로 recursive robust least M-estimation (RLM) 기법을 이용하여 두 개의 센서 노드 간의 상대적인 클락 스큐(skew)와 위상 차이를 추정한다. 그 과정에서 NLOS 환경으로 인해 uplink와 downlink시에 발생하는 지연시간의 차이를 추적하여 억제시킴으로써 알고리즘의 성능 향상시킨다. 또한 mean square error (MSE)를 계산하여 알고리즘의 성능을 기존 maximum-liklihood (ML) 기법을 이용한 알고리즘과 비교 분석한다.
We observe simultaneous transmission of relay stations (RSs) allowed in current IEEE 802.16j draft standard for multi-hop relay networks may involve severe interference among the RSs, hence leading to throughput degradation. Allowing only 1/3 of the RSs to simultaneously transmit instead of 1/2 RSs as in the current draft standard reduces the interference but results in reduced throughput. To remedy this problem, we devise schemes to incorporate network coding at link-layer level (decode-and-forward) into the simultaneous transmission of RSs. Data movement is rearranged to maximize coding gain. Formula is derived to dictate exact movement of packets traveling between base station (BS) and mobile stations (MSs) via intermediate RSs. The frame structure in the current IEEE 802.16j draft standard does not allow broadcast needed for network coding. We devise a new frame structure which supports the broadcast. A new R-MAP (pointers to the burst data) is introduced to implement the broadcast. Since our new frame structure is used only for BS to RS or RS to RS communication, our schemes retain backward compatibility with legacy MSs based on IEEE 802.16e standard. Simulation based on simple configuration of RSs shows considerable improvement in terms of system throughput and round trip delay. For a 4-hop relay network with 1 BS and 4 RSs with symmetric traffic in uplink (UL) and downlink (DL), throughput is improved by 49% in DL and by 84% in UL traffic compared with IEEE 802.16j draft standard under the assumption that omni-directional antennae are used in BS and RSs.
무인항공기가 성공적으로 임무를 수행하는데 있어서는 비행제어용 장치나 임무장비로부터 나오는 데이터를 효율적으로 전송할 수 있는 장비가 필수적이다. 이러한 요구조건은 무인항공기가 복잡해지면서 더욱 강화되고 있다. 이런 무선통신장치의 활용은 무인기의 활용단계 뿐 아니라 초기 개발과정부터 필요한 기본 장비의 하나이다. 이 논문에서는 무인항공기의 개발과 운용에 효율적으로 쓸 수 있는 무선통신시스템을 제시한다. 이 시스템의 하향통신은 탑재 카메라에서 나오는 영상과 데이터를 결합하여 2.4 GHz의 고속으로 전송하며 상향은 전송률보다는 안정성에 비중을 두어 430 MHz 신호를 사용한다. 이 논문에서는 이러한 하드웨어체계에 대한 설명뿐 아니라 통신 패킷 구조를 제시하는데 이는 많은 동급의 무인항공기에 활용될 수 있을 것이다.
전이중(full-duplex) 셀룰라 네트워크에서 상향링크 사용자는 하향링크 사용자에게 간섭을 유발하므로 같은 무선 자원을 동시에 사용하는 상 하향링크 사용자 쌍을 어떻게 결정하는 지가 시스템 성능에 큰 영향을 미친다. 본 논문에서는 사용자의 서비스의 질을 보장하기 위한 목적으로 아웃티지(outage) 발생의 최소화를 위한 최적화 문제를 제시하고, 낮은 복잡도를 갖는 차선의 사용자 스케쥴링 알고리즘을 제안한다. 제안하는 스케쥴링 방식은 나쁜 신호 품질을 갖는 하향링크 사용자에게 간섭을 덜 미치는 상향링크 사용자를 먼저 선택할 수 있도록 우선권을 주는 방식으로 동작한다. 시뮬레이션 결과 제안하는 사용자 스케쥴링 방식을 사용하는 전이중 시스템은 최적에 가까운 아웃티지 성능을 달성하면서 기존 반이중 모드의 셀룰라 시스템 대비 아웃티지 발생을 현저히 줄인다.
Decode and Forward (DF) 방식을 사용하는 OFDM 기반 Full Duplex Relay (FDR)에서는 주파수 영역에서의 궤환 간섭 제거 방식이 더욱 효율적이다. 그러나 OFDM 기반의 FDR에서 궤환 간섭 신호 제거 및 복조를 주파수 영역에서 수행하는 경우 궤환 간섭 신호와 기지국으로부터 전송된 신호의 시간동기 불일치에 의한 인접 심볼간 간섭 및 인접 부반송파 간섭이 발생한다. 본 논문에서는 Synchronous 타입과 Asynchronous 타입의 OFDM 기반 FDR에서 시간 동기 불일치에 의한 영향을 하향링크와 상향링크에 대하여 분석한다. 주파수 영역 궤환 간섭 제거기를 갖는 FDR에서 간섭의 영향을 감소시킬 수 있는 동기화 절차와 기법을 제안하고, 모의실험을 통하여 그 성능을 확인한다.
In this paper, IO+5G dedicated hardware is developed and an AI device communication system equipped with a 5G is designed and tested. The AI device communication system equipped with a 5G receives the collected real-time images and the information collected from the IoT sensor in real time is to analyze the information and generates the risk detection events in the AI processing board. The event generated in the AI processing board creates a 5G channel in the dedicated hardware equipped with IO+5G. The created 5G channel delivers event video to the control video server. The 5G based dongle network enables faster data collection and more precise data measurement compared to wireless LAN and 5G routers. As a result of the experiment in this paper, the average test result of the 5G dongle network is about 51% faster than the Wi-Fi average test result in downlink and about 40% faster in uplink. In addition, when comparing the test result with terms of the 5G rounter to be set to 80% upload and 20% download, the average test result is that the 5G dongle network is about 11.27% faster when downloading and about 17.93% faster when uploading. when comparing the test result with terms of the the router to be set to 60% upload and 40% download, the 5G dongle network is about 11.19% faster when downlinking and about 13.61% faster when uplinking. Therefore, in this paper it describes that the developed 5G dongle network can improve the results by collecting data and analyzing it faster than wireless LAN and 5G routers.
KSII Transactions on Internet and Information Systems (TIIS)
/
제8권2호
/
pp.618-633
/
2014
Relay technology is becoming more important for mobile communications and wireless internet of things (IoT) networking because of the extended access network coverage range and reliable quality of service (QoS) it can provide at low power consumption levels. Existing mobile multihop relay (MMR) technology uses fixed-point stationary relay stations (RSs) and a divided time-frame (or frequency-band) to support the relay operation. This approach has limitations when a local fixed-point stationary RS does not exist. In addition, since the time-frame (or frequency-band) channel resources are pre-divided for the relay operation, there is no way to achieve high channel utilization using intelligent opportunistic techniques. In this paper, a different approach is considered, where the use of mobile/IoT devices as RSs is considered. In applications that use mobile/IoT devices as relay systems, due to the very limited battery energy of a mobile/IoT device and unequal channel conditions to and from the RS, both minimum energy consumption and QoS support must be considered simultaneously in the selection and configuration of RSs. Therefore, in this paper, a mobile RS is selected and configured with the objective of minimizing power consumption while satisfying end-to-end data rate and bit error rate (BER) requirements. For the RS, both downlink (DL) to the destination system (DS) (i.e., IoT device or user equipment (UE)) and uplink (UL) to the base station (BS) need to be adaptively configured (using adaptive modulation and power control) to minimize power consumption while satisfying the end-to-end QoS constraints. This paper proposes a minimum transmission power consuming RS selection and configuration (MPRSC) scheme, where the RS uses cognitive radio (CR) sub-channels when communicating with the DS, and therefore the scheme is named MPRSC-CR. The proposed MPRSC-CR scheme is activated when a DS moves out of the BS's QoS supportive coverage range. In this case, data transmissions between the RS and BS use the assigned primary channel that the DS had been using, and data transmissions between the RS and DS use CR sub-channels. The simulation results demonstrate that the proposed MPRSC-CR scheme extends the coverage range of the BS and minimizes the power consumption of the RS through optimal selection and configuration of a RS.
무선 방송 환경은 모바일 클라이언트 수에 상관없이 다수의 클라이언트에게 데이타를 보낼 수 있다는 특징이 있다. 이와 같은 특징으로 무선 방송은 많은 분야에 적응되고 있는데 이러한 응용분야에서는 대부분이 읽기 작업을 수행하며 데이타를 일관성 있게 관리하기 위하여 트랜잭션 단위의 동시성 제어기법을 사용하고 있다. 기존 멀티 무선 방송 채널에서의 데이타 할당 방법으로 구성된 데이타 채널들에서는 단일채널에서 사용하는 동시성 제어 기법으로 트랜잭션의 일관성을 보장해 주기 어렵다. 이는 각 데이타 채널의 브로드캐스트 주기가 서로 다르기 때문에 특정 채널에서 데이타를 수신한 후, 다음 채널로 이동하였을 때 트랜잭션이 접근하는 데이타의 일관성이 깨질 수 있기 때문이다. 본 논문에서는 이러한 문제를 해결할 수 있는 멀티 무선 방송채널에서의 읽기 트랜잭션을 위한 동시성 제어 기법을 제안하였다. 이 논문에서는 기본적으로 인덱스 전용 채널과 데이타 전용채널 구조를 이용한다. 또한 LBCPC(Longest Broadcast Cycle Per Channel)라는 새로운 일관성의 단위를 제시한다. 데이타 전용채널에서는 이 LBCPC만큼 같은 BCPC(Broadcast Cycle Per Channel)내의 데이타를 반복하여 방송한다. 또한 LBCPC마다 전체 데이타에 대한 제어 정보를 이용하여 자체적으로 트랜잭션의 검증을 실시한다. 이로 인해 트랜잭션의 일관성이 유지될 뿐만 아니라 단일채널의 긴 브로드캐스트 주기보다 짧은 LBCPC로 인하여 재실행을 위한 대기 시간을 줄여줌으로써 평균 응답 시간을 줄여줄 수 있다. 또한 단일 채널에 비해 제어 정보를 자주 방송함으로써 읽기 전용 트랜잭션이 접근하는 데이타에 대한 최신성을 보장한다. 마지막으로 실험을 통해 단일 채널과의 트랜잭션의 평균 응답 시간이 현저히 감소함을 보임으로써 제안하는 다중 채널에서의 동시성 제어 기법의 성능을 검증한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.