• Nuclear Engineering and Technology
• /
• v.28 no.5
• /
• pp.458-466
• /
• 1996

The effects of dopants on the modification of microstructure of UO$_2$ and UO$_2$-4wt%CeO$_2$ sintered pellets have been studied in hydrogen and $CO_2$/CO mixture atmospheres by using $Ta_2O_5$, TiO$_2$ and $Nb_2O_5$ as sintering additives. The dopant were added as oxide powders and homogenized by attrition milling. The mixed powders were pressed, and then sintered in hydrogen at 1$700^{\circ}C$ , or in oxidizing atmosphere using Controlled $CO_2$/CO mixtures at 125$0^{\circ}C$. Both density and microstructure of UO$_2$ are modified by the addition of dopants in reducing atmosphere. The sintered density is increased with $Ta_2O_5$ addition up to 0.33wt% and subsequently decreased with higher content of the additive. The effect on the densification and the gain growth are apparent with the addition of 0.24wt% $Nb_2O_5$. With 0.lwt% titania and 0.6wt% $Ta_2O_5$, the sintered density is decreased, but the grain size is increased. In oxidizing atmosphere, the grain sizes for UO$_2$ doped with the above additives are smaller than that for pure UO$_2$. The grain size of Ta or Nb-doped UO$_2$ is decreased with increasing $CO_2$/CO ratio, but that of pure UO$_2$or T-doped UO$_2$ is increased. A large portion of second phases is observed in UO$_2$ doped with 0.lwt% TiO$_2$ sintered in hydrogen atmosphere, while, in $CO_2$/CO atmospheres, the second phases or dopant agglomerates are not observed. For UO$_2$-4wt%CeO$_2$ mixed oxide, the effect of additives on the gain growth is not so much as that for the pure UO$_2$. This is attributed to the formation of clusters by dopant cations and Ce ions, so that the additives contribute to a lesser exent to the grain growth for the mixed oxide.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.334-341
• /
• 2016

In this paper, the study of a waveguide aperture-coupled feed-structured antenna has been conducted for the purpose of applying it to a wireless back-haul system sufficient for high-capacity gigabits-per-second data rates. For this study, a $32{\times}32$ waveguide slot sub-array antenna with a corporate-feed structure was designed and produced. Also, this antenna is used at 57 GHz to 66 GHz in the V-band. The construction of the antenna is a laminated form with radiating parts (outer groove and slot, cavity), a coupled aperture, and feeds in each. The antenna was designed with HFSS, which is based on 3D-FEM, produced with aluminum processed by a precision-controlled milling machine, and assembled after a silver-plating process. The measurement result from analysis of the characteristics of the antenna shows that return loss is less than -12 dB, VSWR < 2.0, and a wide bandwidth ranges up to 16%. An overall first side lobe level is less than -12.3 dB, and a 3 dB beam width is narrow at about $1.85^{\circ}$. Also, antenna gain is 38.5 dBi, offering high efficiency exceeding 90%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.51-57
• /
• 2013

We have applied mechanical alloying (MA) to produce Heusler $Fe_2VAl$ thermoelectric alloy using a mixture of elemental $Fe_{50}V_{25}Al_{25}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of Fe2VAl compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry (DSC) measurement. The $Fe_{50}V_{25}Al_{25}$ MA sample ball-milled for 60 hours exhibits a bcc ${\alpha}$-(Fe,V,Al) solid solution. Single phase of Heusler $Fe_2VAl$ compound can be obtained by MA of $Fe_{50}V_{25}Al_{25}$ mixture for 60 hours and subsequently heated up to $700^{\circ}C$. Sintering of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $900{\sim}1000^{\circ}C$ under 60 MPa. The Vickers hardness of bulk sample sintered at $1000^{\circ}C$ was high value of Hv 870. All compact bodies have a high relative density above 90 % with metallic glare on the surface.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.3
• /
• pp.121-127
• /
• 2007

We have applied mechanical alloying (MA) to get $Mg_2Si$ thermoelectric material with nano-sized grains. An optimal milling and heat treatment conditions to obtain the single phase of $Mg_2Si$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry (DSC) measurement. The $Mg_{66.7}Si_{33.3}$ MA samples ball-milled for $20{\sim}180\;hrs$ exhibit two broad exothermic heat releases around $220^{\circ}C$ and $570^{\circ}C$. On the other hand, MA sample ball-milled far 260 hrs exhibits only a sharp exothermic peak at $230^{\circ}C$ Single phase Mg2Si powder can be obtained by MA of $Mg_{66.7}Si_{33.3}$ mixture for 60 hours and subsequently heated up to $620^{\circ}C$. Sintering of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $800{\sim}900^{\circ}C$ under 50 MPa. The shrinkage of sintering sample during SPS was significant at about $200^{\circ}C$. All compact bodies have a high relative density above 94% with metallic glare on the surface.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.268-272
• /
• 2008

$LiFePO_4$ material was synthesized by electrospinning method to obtain optimal particle size($50{\sim}100\;nm$) without carbon coating or ball milling. This material showed an orthorthombic structure with Pnma space group without any impurities, such as FeP or $Fe_2P$, in the XRD pattern. The particle morphology and particle shape were observed by SEM analysis. Li/$LiFePO_4$ cell showed a high initial discharge capacity of 135 mAh/g, at current density of $0.1\;mA/cm^2$ with a cut-off voltage of 2.8 to 4.0V. This cell exhibited a perfect cycle performance over 99.9% cycle retention rate up to 50 cycles.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1543-1549
• /
• 2015

Black rice bran, a by-product from rice milling process, is a good natural source of anthocyanin pigment. The purpose of this study was to determine the optimum conditions for anthocyanin extraction from black rice bran as well as the stability of anthocyanin extract according to different storage temperatures. The main anthocyanin in 'Heugkwang' rice bran was identified as cyanidine-3-glucoside (C3G) by HPLC and LC-MS/MS. The yield and C3G content of black rice bran extract were investigated with various extraction solvents, temperatures, and times. The results indicate that the optimum extraction solvent, temperature, and time were 50% ethanol, $70^{\circ}C$, and 2 h, respectively. The stability of anthocyanin extract was studied during a storage period of 168 days at various temperatures ($-20^{\circ}C$, $4^{\circ}C$, and room temperature). Hunter's values (L, a, and b) of anthocyanin extract increased, whereas C3G content continuously decreased up to 168 days. Variations in Hunter's values and C3G content become larger as storage temperature increased. Anthocyanin extract from black rice bran was very stable, as C3G content after storage at all temperatures was maintained at more than 90% of initial content. These results suggest that anthocyanin extract from black rice bran may be useful as a natural food colorant.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.3
• /
• pp.175-182
• /
• 2009

The spent cationic exchange resins and anionic exchange resins were separated from mixed spent exchange resins by a fluidized bed gravimetric separator. The separated resins were identified by an elemental analysis and thermogravimetric analysis. The each test sample was prepared by diluting the slurry made by wet ball milling the cationic exchange resins and the anionic exchange resins separated as a spherical granular form for 24 hours. The resulting test samples showed a slurry form of less than $75{\mu}m$ of particle size and 25,000ppm of $COD_{cr}$. The decomposition conditions of each test samples from a thermal power plant were obtained with a lab-scale(reactor volume : 220mL) supercritical water oxidation(SCWO) facility. Then pilot plant(reactor volume : 24 L) tests were performed with the test samples from a thermal power plant and a nuclear power plant successively. Based on the optimal decomposition conditions and the operation experiences by lab-scale facility and the pilot plant, a commercial plant(capacity : 150kg/h) can be installed in a nuclear power plant was designed.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.888-894
• /
• 1997

Two hulled and two hull-less barley varieties were investigated for ${\beta}-glucan$ enrichment. Hull-less barleys contained higher levels of total ${\beta}-glucan$ than hulled barleys, and were thus suitable as starting materials for preparing ${\beta}-glucan-rich$ fractions. Particularly, a waxy type (Suweon-291) of hull-less barley was found to have high soluble dietary fiber content containing primarily ${\beta}-glucan$, compared to the other non-waxy barley varieties. ${\beta}-Glucan$ content of barley during pearling process was measured, and the highest value was observed at the pearling yield of approximately $70{\sim}75%$. The pearled barley grains were ground and sieved to yield ${\beta}-Glucan$ enriched fractions containing up to 22% ${\beta}-glucan$. In the meanwhile, whole barley samples were directly milled by $B{\ddot{u}}hler$ mill to produce bran, shorts, break flour and reduction flour. ${\beta}-Glucan$ contents in the bran and shorts from the milled stream were relatively high, and further concentration of ${\beta}-glucan$ could be accomplished by successive sieving of the bran and shorts fractions. Pearled barley and milled stream could be used to prepare barley fractions with ${\beta}-glucan$ concentrations $2.4{\sim}3.1$ times those of the original barley grain. Water solubility of barley ${\beta}-glucan$ from pearled barley and the milled stream was in the range of $40{\sim}81%$.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.2 s.52
• /
• pp.71-81
• /
• 2007

The marble-type dolomite from the Jasung Mine, which was farmed by duplicated affects of contact metamorphism and subsequent hydrothermal alteration, corresponds to a high-purity dolomite ranging up to above 98wt.% in dolomite contents. The dolomite contain minor impurities such as quartz, muscovite, and pyrite. It is characteristic that the dolomite is fairy Fe-rich corresponding to 0.4 wt.% due to the presence of pyrite of possible hydrothermal origin. The dolomite is nearly white-colored and constituting with subhedral crystals ranging $0.35{\sim}0.46mm$M in size, forming equigranular texture. Compared to the typical high-Ca limestone from the Pungchon Formation, the powder characteristics of dolomite is rather superior in milling efficiency, yields of fine particles, and size distribution. In addition, except for iron contents, the dolomite powder is no less superior than the limestone in quality and characteristics as fillers with respects to not only whiteness, oil absorption, and specific surface area but also shape characters such as elongation ratio, aspect ratio, and sphericity. This good characteristics of dolomite powder seem to be originated basically from comparatively higher grade and crystallinity of dolomite. Higher iron contents and the presence of sulfides prevents the dolomite from application for uses by thermal treatment, except for metallic manufacture. However, if proper ore separation procedure is available, the dolomite can be sufficiently utilized as substitutes for high-Ca limestone in most fields of filler industries.