• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.1-4
• /
• 2004

This research surveys the twisting and untwisting tensions according to the various processing conditions of belt type texturing such as draw ratio, 1st heater temperature and velocity ratio. The 1st heater temperature was changed from 1606{\circ}C\; to\; 220^{\circ}C$, draw ratio was changed from 1.6 to 1.9 and velocity ratio was changed from 1.4 to 1.8. The twisting and untwisting tensions are measured with the variation of these processing conditions, in addition, the untwisting tension(T2) and tension ratio(T2/Tl) according to the various processing conditions are analysed with the false twist mechanism which is affected to the physical properties of draw textured yams.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.39-40
• /
• 2003

This research surveys the effects of POY physical properties and processing conditions of belt texturing machine to the draw textured yarns. The various textured yarns are made with variation of 1st heater temperature, draw ratio and velocity ratio, and the physical properties of these specimens such as yarn linear density, tensile properties and wet and dry thermal shrinkages are measured and analyzed with POY physical properties and processing conditions of texturing machine. Especially yarn mechanical properties of DTY are analysed with the variation of untwisting tension (T$_2$) on the untwisting part in DTY process and thin and thick DTY yam model are proposed with surging phenomena in DTY process.

• Textile Coloration and Finishing
• /
• v.16 no.1
• /
• pp.5-9
• /
• 2004

This research surveys the threadline instability on the belt texturing machine according to the 1st heater temperature, draw ratio and velocity ratio. the threadline instability to the time, which is called surging phenomena, is analysed with variations of draw ratio and velocity ratio. In addiction, the surging phenomena is investigated with the variation of the untwisting tension and false twist mechanism on the belt texturing machine. The breaking strain, modulus and yam unevenness of the DTY along the yarn length are measured and analysed with the surging phenomena which is due to untwisting tension variation on the threadline according to the draw ratio, 1st heater temperature and velocity ratio.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.37.1-37.1
• /
• 2011

We report untwisting chromospheric surges of AR 10930. Hinode Solar Optical Telescope (SOT) observed AR 10930 on the west limb continuously from 11:21 UT December 18 to 09:58 UT December 19, using the Ca II H broadband filter. During the observation, rise and fall motion accompanying rotation appeared recursively. There occurred a total of 14 surges at AR 10930 over 17 hours. The average duration was 45 minutes, and the average width, and length were 8 Mm, and 39 Mm, respectively. The dynamic properties including number of turns from the rise to the fall, the axial speed and acceleration are also analyzed. We speculate that the surges occurred by recursive reconnections between the twisted prominence and large untwisted flux tube.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.403-410
• /
• 2000

The effects of various factors were studied on the process of a steel cord by twisting wires. To remove residual twisting moment after the steel cord process, the twisting angles of residual elasti c twisting and overtwisting were measured and compared with finite element results. The agreement between experimental data and finite element calculations was good for the angles of residual elastic twisting and over-twisting. The stress distributions in a steel cord under complex loading conditions were also obtained by using the finite element analysis.

• Textile Coloration and Finishing
• /
• v.11 no.6
• /
• pp.18-23
• /
• 1999

PET POY(pre-oriented-yam) were treated by false twister to high bulky. False twister have many processing parameters velocity ratio(VR), belt cross angle$(\theta)$, 1st heater temp. and K(twisting tension/untwisting tension). we analyzed the effect of properties of textured polyester yam on processing condition. Initial modulus, thermal stress, No. of snarl is decreased by 1st heater. In VR=1.97, Dry and wet shrinkage is increased but is decreased by 1st heater in VR=1.564. K/S and cristallinity tend to increase by decreasing VR.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.293-294
• /
• 2003

최근 다양화된 합섬소재의 등장으로 인해 원사가 다양화되고 그에 따른 가공기술 등의 공정이 복잡해짐에 따라 이들 소재의 기본이 되는 원사의 물성은 여러 공정들을 거치게 되면서 그 역학적 물성들이 변화하게 된다. 원사이후의 공정 특히 사가공 공정에서의 공정에 따른 絲의 물성을 파악하는 것은 직물의 물성 예측에 중요하다. 원사를 가공하는 공정 중 Belt type의 가연기구는 絲손상이 크고 가연 torque가 크며 특히 belt spped의 변화에 의해 적당한 장력이 선정되기 때문에 Pin type과 frictin disk type에서 설정 불가능한 낮은 T$_2$(Untwisting Tension) 장력범위의 가공도 가능하여 부가가치가 높은 絲의 가공이 가능하다. (중략)

• The Journal of Korea Robotics Society
• /
• v.14 no.3
• /
• pp.221-227
• /
• 2019

This paper studies an effect of vibration on twisted string actuation inside conduit at high curvature angles. In our previous work. we have mentioned that twisted string actuators can be used to transmit power even at significant curvature angles of the conduit. However, several undesirable effects, namely pull-back, hysteresis, and chattering, were present during actuation due to friction between strings and the internal sheath of the conduit. This paper reports the results of experimental study on effects of vibration on twisted string actuation inside curved conduits. We have demonstrated that applying vibration generated near natural frequency of the system during the stages of twisting and untwisting cycles helped reduce pull-back and hysteresis and increase string contraction. In case when sheath was deflected by $180^{\circ}$ under a constant load of 3 kg, we were able to achieve over 40% decrease in pull-back and 30% decrease in hysteresis, compared with no vibration case.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.90.1-90.1
• /
• 2013

To better understand the physics underlying the eruption of prominences in solar active regions, we studied eruption processes of two active prominences located in the active region NOAA 11261 using multi-wavelength observational data with high temporal and spatial resolution. Specifically, we examined (1) the temporal variation of morphology and plasma properties of the two active prominences, (2) magnetic fields and their evolution on the photospheric surface underneath the prominences, and (3) the time profiles and locations of radio, EUV, and soft/hard X-ray emissions produced by the M9.3 flare related to the prominence eruption. As a result, we found that: (1) a prominence F1 began to erupt and expand as the abrupt and intense EUV brightening occurred in the localized region underneath the western part of F1 at 03:45 UT prior to the peak time of the M9.3 flare, (2) F1 split into two parts: i.e., the western part asymmetrically erupted by producing the M9.3 flare with microwave source motions along the magnetic polarity inversion line between the two flare ribbons, while the eastern part coalesced into a pre-existing prominence F2, (3) F2 became unstable due to the coalescence with the eastern part of F1, and then it partially erupted with clockwise untwisting motions.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.2
• /
• pp.119-126
• /
• 2009

This paper provides a brief summary of the performance of an innovative slip hardening twisted steel fiber in comparison with other fibers including straight steel smooth fiber, high strength steel hooked fiber, SPECTRA (high molecular weight polyethylene) fiber and PVA fiber. First the pull-out of a single fiber is compared under static loading conditions, and slip rate-sensitivity is evaluated. The unique large slip capacity of T-fiber during pullout is based on its untwisting fiber pullout mechanism, which leads to high equivalent bond strength and composites with high ductility. Due to this large slip capacity a smaller amount of T-fibers is needed to obtain strain hardening tensile behavior of fiber reinforced cementitious composites. Second, the performance of different composites using T-fibers and other fibers subjected to tensile and flexural loadings is described and compared. Third, strain rate effect on the behavior of composites reinforced with different types and amounts of fibers is presented to clarify the potential application of HPFRCC for seismic, impact and blast loadings.