• Tuberculosis and Respiratory Diseases
• /
• v.59 no.6
• /
• pp.613-618
• /
• 2005

Background : Recently, medical treatment of multi-drug resistant pulmonary tuberculosis has been unsuccessful. Through analyzing the cases with surgical treatment, we hope to provide some help in treating multi-drug resistant pulmonary tuberculosis in the future. Material and Method : A retrospective review was performed with 138cases of surgical treatment of multi-drug resistant tuberculosis during 10years from January 1994 to December 2003 at National Masan Hospital. Results : The ratio of men to women, 5.1:1 indicates that there were more incidences in men. The number of the resistant drugs was 5.3 with a mean age of 42.6 years. Cavitary lesions on the plain chest X-rays were seen in 94cases (68.1%). 128cases had positive sputum culture preoperatively. Types of operations were 24 pnemonectomies, 83 lobectomies, 10 bilobectomies, 19 lobectomies with segmentectomies or wedge resections, 1 wedge resection, and 1 carvenoplasty. There was no death after operation. There were 6cases of air leakage over a week, 6cases of postoperative bleeding, 8cases of bronchopleural fistula and empyema, 16cases of dead space, 1case of atelectasis, 1case of wound infection, 1case of cyst as postoperative complication. Postoperative complication showed higher long-term negative conversion rate of 92.8%. Conclusion : There has been many discussions about operative indications, postoperative drug regimens, length of postoperative chemotherapy. In our study, we showed higher long-term success rate of postoperative chemotherapy with pulmonary resection on multi-drug resistant pulmonary tuberculosis.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.3
• /
• pp.283-294
• /
• 2003

Introduction : Rapidly growing nontuberculous mycobacteria (RGM) can produce numerous types of manifestations including a pulmonary infection. Managing a pulmonary infection due to RGM is unusually difficult to treat because the organism is invariably resistant to traditional antituberculous drugs and has a varying susceptibility to other antibiotics. The experiences of treatments for a RGM pulmonary infection with various antibiotics are also limited. This study evaluated the clinical manifestations, treatment, and the therapeutic outcomes of a RGM pulmonary infection. Subjects and method : Fifty-four cases with RGM from respiratory specimens were identified between November of 1996 and September of 2002 in the Asan medical center. The medical records and radiographic findings in 20 patients who fulfilled the diagnostic criteria of nontuberculous mycobacteria (NTM) pulmonary disease by ATS guidelines. The clinical, laboratory, and radiological parameters between subgroups. Results : Of the 20 patients, 15 were female. The mean age was 57.7 yrs (${\pm}7.5$), and all of the patients had a history of pulmonary tuberculosis. Most (90%) had an underlying lung disease. The majority of the isolates (80%) were M. abscessus. Chest radiography showed bilateral involvement in 80% of the patients. Bronchiectasis and multiple nodules were the main findings. Cavitation was present in 35% of the patients. Even though 70 % of the patients received antituberculous drugs prior to the correct diagnosis, all of the patients eventually received antibiotics. A mean of 3.5 antibiotics were given for an average of 439 days(${\pm}168$). After completing treatment, nine patients showed improvement after a mean 591(${\pm}311$) days of treatment, whereas the antibiotic treatment was unsuccessful in 2 patients. Conclusion : Many patients with a RGM pulmonary infection show an atypical pattern of radiological findings (bronchiectasis and multiple centrilobular nodules). It is very important to differentiate between M. tuberculosis and NTM and to identify the causative organisms among the NTM because a misdiagnosis can lead to an inappropriate and prolonged treatment. Combined antibiotic treatment yielded promising results, and is recommended for treating patients with a RGM pulmonary infection.

• Journal of the Korean Geographical Society
• /
• v.31 no.3
• /
• pp.489-507
• /
• 1996

The purpose of this study is to examine the increasing number of unregistered manufacturing plants and related problems, and to recommend alternative solutions to the problems. Data are obtained from a field survey of randomly selected small scale manufacturing plants in Seoul and its suburban cities. A total number or respondents are 533, and 416 of them are unregistered plants. The Capital Regional Planning has had a goal during last three decades to lead a balanced regional economic development by restriction manufacturing plants in the Capital Region and by encouraging them in other regions in the nation. It was 1984 when a comprehensive planning was established to achieve this goal. Sets of various regulations, by-laws and codes have been implemented to regulate manu-facturing activities in the Capital Region to achieve the goal. The region is divided into three sub-regions, and a different degree of regulations is applied to each sub-region. Only a certain types of industries are allowed in a particular sub-region. For instance, a plant manufacturing high-technology products could be allowed in the most urbanized sub-region. All manu-facturing plant in the Capital Region which has ares size of larger than 200"\;"$m^2$ is compulsory to register to the local government office. In practice, however, it is not common or sometimes almost impossible to get approval for many applicant manufacturers because of strict regulations. There have been increasing number of plants in the Capital Region during last several decades, despite the strict regulations. Many of those newly established plants are without formal registration at the local administration office. howerver. These are so called 'unregisterd' plants. Surveyed data and many government official data show that many of unregistered plants have been established in recent years. which indicate that current regulations are no longer effective. The number of unregistered plants are increasing tin the Capital Region because of many locational advantages in the region for plants, particularly those in small scale. Unregistered plants are the source of many problems, such as local water pollution or noise pollution in residential areas. There are also many administration problems, bed\cause they are not registered. The central government has attempted to cure the problems of unregistered plants. For example, the government allowed a unregistered plant to remain at present site for three ydars, if it met certain conditions in three years. However, this program was unsuccessful because many of those plants were not able to meet the concitions. Three times the government renewed the term for those which did not meet conditions since 1989, but it was afraid to be without success. There are many evidences that current policies to control manufacturing plants are not effective. The Capital Region must face mounting problems if ploicies are not reformed soon. This study suggests that the policy of the Capital Regional Planning has to be reoriented to provide more favorable policies for manufacturing plants in the Capital Region than current regulations which is aimed to restrict manufacturing activities. It is time to improve many existing problems in the region through reforms and of current regulations to foster unregistered plants. This study also proposes many smaller-area sub-divisions instead of current three large area sub-regions which is too broad to apply single kind of regulation, or codes. Flexible regulations and codes can be applied to such a small-area sub-divivisions based on location and industrial characteristics of the individual sub-divisions. It is necessary to provide decent industrial environment in the Capital Region, which is best equipped to provide many favorable industrial locational factors in the nation, thus this nation can be further prepared to compete in an inter-national market at an era of globalization in manufacturing.

• Asia pacific journal of information systems
• /
• v.21 no.4
• /
• pp.1-25
• /
• 2011

Internet-based commerce has undergone an explosive growth over the past decade as consumers today find it more economical as well as more convenient to shop online. Nevertheless, the shift in the common mode of shopping from offline to online commerce has caused consumers to have worries over such issues as private information leakage, online fraud, discrepancy in product quality and grade, unsuccessful delivery, and so forth, Numerous studies have been undertaken to examine the role of perceived risk as a chief barrier to online purchases and to understand the theoretical relationships among perceived risk, trust and purchase intentions, However, most studies focus on empirically investigating the effects of trust on perceived risk, with little attention devoted to the effects of perceived risk on trust, While the influence trust has on perceived risk is worth studying, the influence in the opposite direction is equally important, enabling insights into the potential of perceived risk as a prohibitor of trust, According to Pavlou (2003), the primary source of the perceived risk is either the technological uncertainty of the Internet environment or the behavioral uncertainty of the transaction partner. Due to such types of uncertainty, an increase in the worries over the perceived risk may negatively affect trust, For example, if a consumer who sends sensitive transaction data over Internet is concerned that his or her private information may leak out because of the lack of security, trust may decrease (Olivero and Lunt, 2004), By the same token, if the consumer feels that the online merchant has the potential to profit by behaving in an opportunistic manner taking advantage of the remote, impersonal nature of online commerce, then it is unlikely that the merchant will be trusted, That is, the more the probable danger is likely to occur, the less trust and the greater need to control the transaction (Olivero and Lunt, 2004), In summary, a review of the related studies indicates that while some researchers looked at the influence of overall perceived risk on trust level, not much attention has been given to the effects of different types of perceived risk, In this context the present research aims at addressing the need to study how trust is affected by different types of perceived risk, We classified perceived risk into six different types based on the literature, and empirically analyzed the impact of each type of perceived risk upon consumer trust in an online merchant and further its impact upon purchase intentions. To meet our research objectives, we developed a conceptual model depicting the nomological structure of the relationships among our research variables, and also formulated a total of seven hypotheses. The model and hypotheses were tested using an empirical analysis based on a questionnaire survey of 206 college students. The reliability was evaluated via Cronbach's alphas, the minimum of which was found to be 0.73, and therefore the questionnaire items are all deemed reliable. In addition, the results of confirmatory factor analysis (CFA) designed to check the validity of the measurement model indicate that the convergent, discriminate, and nomological validities of the model are all acceptable. The structural equation modeling analysis to test the hypotheses yielded the following results. Of the first six hypotheses (H1-1 through H1-6) designed to examine the relationships between each risk type and trust, three hypotheses including H1-1 (performance risk ${\rightarrow}$ trust), H1-2 (psychological risk ${\rightarrow}$ trust) and H1-5 (online payment risk ${\rightarrow}$ trust) were supported with path coefficients of -0.30, -0.27 and -0.16 respectively. Finally, H2 (trust ${\rightarrow}$ purchase intentions) was supported with relatively high path coefficients of 0.73. Results of the empirical study offer the following findings and implications. First. it was found that it was performance risk, psychological risk and online payment risk that have a statistically significant influence upon consumer trust in an online merchant. It implies that a consumer may find an online merchant untrustworthy if either the product quality or the product grade does not match his or her expectations. For that reason, online merchants including digital storefronts and e-marketplaces are suggested to pursue a strategy focusing on identifying the target customers and offering products that they feel best meet performance and psychological needs of those customers. Thus, they should do their best to make it widely known that their products are of as good quality and grade as those purchased from offline department stores. In addition, it may be inferred that today's online consumers remain concerned about the security of the online commerce environment due to the repeated occurrences of hacking or private information leakage. Online merchants should take steps to remove potential vulnerabilities and provide online notices to emphasize that their website is secure. Second, consumer's overall trust was found to have a statistically significant influence on purchase intentions. This finding, which is consistent with the results of numerous prior studies, suggests that increased sales will become a reality only with enhanced consumer trust.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Journal of Chest Surgery
• /
• v.40 no.6 s.275
• /
• pp.399-406
• /
• 2007

Background: Ischemia-reperfusion injury related to unsuccessful myocardial protection affects postoperative ventricular function and mortality during open-heart surgery. We prospectively compared the effects of administration of histidine-tryptophan-ketoglutarate (HTK) solution and cold blood cardioplegia (CBC) on myocardial protection and clinical outcome in patients undergoing mitral valve surgery. Material and Method: Seventy patients with mitral regurgitation (MR) undergoing mitral valve surgery were randomly divided into the HTK group (n=31) and the CBC group (n=31 ): eight patients were excluded. Perioperative hemodynamics, cardiac medications, pacing, postoperative outcomes and complications were recorded during the hospital stay. All patients received follow-up for at least 6 months postoperatively for morbidity and mortality. Resuか: There were no significant differences in the hemodynamics between the groups during the study period, except for the mean pulmonary artery pressure (MPAP), PCWP and CVP that were lower in the HTK group at 15 min after weaning of CBP. There were no differences for inotropic support and pacing during the 12 hrs postoperatively between the groups. CK-MB values on day 1 and day 2 were $77{\pm}54$ and $41{\pm}23$ for the HTK group and $70{\pm}69$ and $44{\pm}34$ for the CBC group, respectively (p=NS). Postoperative clinical outcomes were similar in both groups for at least 6 months during the follow-up period. Conclusion: These results suggest that the use of HTK solution is as safe as cold blood cardioplegia in terms of myocardial protection.

• Journal of Science and Technology Studies
• /
• v.19 no.3
• /
• pp.247-289
• /
• 2019

By examining the experiences of three social economy organizations who participated in the social problem-solving R&D projects, we discuss the conditions which may encourage the participation of civil society in national R&D programs in South Korea. By calling for the inclusion of social economy organizations along with the living-lab, the social problem-solving R&D projects introduced a new type of civic participation in the national R&D programs. It is the requirement in the RFP of the social problem-solving R&D which led PIs to inviting social economy organizations into their projects. But the invites occurred rather abruptly and accidently without adequate mutual understanding between scientific experts and social economy organizations. While helping social economy organizations participate in R&D processes, this form of institutional arrangement also led them into a position in subordination to scientific experts. Social economy organizations were supposed to coordinate the living lab in the social problem-solving R&D projects which they felt familiar as an extension of what they have been doing. In contrast, they felt administrative work such as accounts following complicate administrative rules as the most unfamiliar challenge. The difference in their emphases between scientific experts and social economy organizations was also evident. Social economy organizations viewed that, while they and ordinary people are primarily interested in a practical use of the developed products or services, scientific experts tend to focus on research and development. Not only did such difference produce a friction in the R&D processes but also it had social economy organizations view the R&D projects they participated in as unsuccessful. Nevertheless, all these experiences provided a great opportunity for the social economy organizations for learning and growing as a new actor in the national R&D.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.59-66
• /
• 2019

Purpose: Several radiologic reference lines have been used to evaluate individuals with a clubfoot but there is no consensus as to which is most reliable. The aim of this study was to identify which radiologic parameters have relevance to the predictability of additional surgery after Ponseti casting on clubfoot and the effect of clubfoot treatments that contain Ponseti casting and additional surgery. Materials and Methods: A total of 102 clubfeet (65 patients, 37 bilateral) were reviewed from 2005 to 2013. The patients were divided into two groups (Group A, those for whom the result of the Ponseti method was successful and did not require additional surgery; and Group B, those for whom the result of the Ponseti method was unsuccessful and required additional surgery), and the following parameters were measured on the plain radiographs: i) talo-calcaneal angle on the anteroposterior and lateral view, ii) talo-1st metatarsal angle on the anteroposterior view, and iii) Tibio-calcaneal angle on the lateral view with the ankle full-dorsiflexion state. Each radiograph was reviewed on two separate occasions by one orthopedic doctor to characterize the intra-observer reliability, and the averages were analyzed. Next, 20 cases were chosen using a random number table, and two orthopedic doctors measured the angle separately to characterize the interobserver reliability. Results: Groups A and B included 73 clubfeet (71.6%) and 29 clubfeet (28.4%), respectively. The initial talo-calcaneal angle and tibiocalcaneal angle in the lateral view were significantly different among the groups. In addition, inter- and intra-observer biases were not detected. The talo-1st metatarsal angle on the anteroposterior view and tibio-calcaneal angle on the lateral view were significantly different after treatment in both groups. Conclusion: Congenital clubfeet treated with the Ponseti method showed successful results in more than 70% of patients. The initial talocalcaneal angle and tibio-calcaneal angle on the lateral view were the radiologic parameters that could predict the need for additional surgical treatments. The talo-1st metatarsal angle on the anteroposterior view and tibio-calcaneal angle on the lateral view could effectively evaluate the changes in clubfoot after treatment.

• Asia Marketing Journal
• /
• v.11 no.3
• /
• pp.185-203
• /
• 2009

Yuhan Kimberly, a joint-venture company of Korean Yuhan Company and American Kimberly-Clark, opened a premium diaper market in Korea by launching Pull-Ups which was pants-typed diapers in 1993. Pull-Ups was imported as finished goods from Kimberly-Clark. However, in spite of its huge market share in United States, it failed to land down in Korean market because of wrong positioning strategy which did not consider domestic customers' tastes. In 1996, Yuhan-Kimberly brought out a pants-typed diaper, Huggies-Toddler, to Korean market again. This paved the way for the combination of Kimberly-Clark's production power and Yuhan-Kimberly's marketing power and led to launch new product superior to Pull-Ups. However, this product was unsuccessful in the market because of wrong positioning which did not catch domestic customer's life styles such as cultural, environmental and habitual differences in toilet training, the cost increase coming from IMF crisis in Korea, weak trust within the company, weak trust within the company, and too much higher price than regular diapers. In 2005, Yuhan-Kimberly redeveloped new pants market business strategy. It was organically combined with winning product development plan, winning communication strategy and the market structure change through the pants market creation. Customer's habit, usage and attitude were studied with total 55 times market investigations. Also, all processes from planning to designing were executed in the customer's view by investigating product research, positioning research and advertisement research. Yuhan-Kimberly repositioned new product as a wearing diaper not as a toilet training diaper and launched Huggies Magic Panty as a premium product which had 25% higher price than previous Huggies. Huggies Magic Panty was recognized as a great hit product in domestic diaper market and the sales recorded 37.6 bill won in 2006, 57.2 bill won in 2007, and 90 bill won in 2008 since launching in 2005. The reason of Huggies Magic Panty's success was the repositioning strategy deduced from the precise check of customer's usage habit. It was the winning strategy of Huggies that were market investigation in order to survive in domestic baby goods market where a lot of companies struggled intensively, the exact positioning based on its market investigation and aggressive 360 degree communication strategy to give customers impressions efficiently.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.42-56
• /
• 2005

Hyperlipidemia is one of the risk factors for coronary artery disease. Despite of epidemiological evidence that tea consumption is associated with the reduced risk of coronary heart disease, experimental studies designed to show that drinking tea affects blood lipid concentration or oxidative stress have been unsuccessful. The purpose of this study was to investigate whether functional tea (three servings/day) supplement with medical nutrition therapy (MNT) lead to a beneficial outcomes in mildly hyperlipidemic adults. From February to October, 2003, the 43 hyperlipidemic (23 men, 20 women) subjects (total cholesterol$\geq$200 mg/dL or triglyceride$\geq$150 mg/dL) admitted to K Medical Center were studied. Subjects were randomly divided into 3 groups; placebo tea (PT), half dose of functional tea (HFT), full dose of functional tea (FFT). During 12 weeks of study period, the subjects were given placebo or functional tea daily with MNT. Anthropometric measurements, blood chemical analysis including lipid levels, total superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) levels, and dietary assessment were carried out at the beginning and end of experiment. The effects of functional tea were compared with the placebo in randomized clinical trial study. The placebo was prepared to match with the functional tea in color and taste. After the 12 weeks of MNT, the subjects had regular and balanced meal pattern. Consumption of foods high in cholesterol and saturated fat, salty foods, fried foods, and instant foods decreased significantly in all three groups (p<0.05). Intake of energy and cholesterol also decreased (p<0.05). Drinking three servings per day (390 mL/day) of functional tea significantly reduced the levels of blood triglyceride (HFT, 42.5%; FFT, 29.4%), total cholesterol (HFT, 8.5%; FFT, 13.7%), and atherogenic index (HFT, 14.6%; FFT, 21.7%). Whereas no changes were found in the LDL-, HDL-cholesterollevels, and LDL/HDL ratio. Plasma homocysteine (Hcy) concentration decreased significantly (p<0.05) in functional tea groups (HFT, 14.9%; FFT, 14.1%). SOD increased significantly (p<0.05) in HFT (8.3%). GSH-Px increased significantly (p<0.05) in FFT (12.8%). In conclusion, the MNT improved the dietary habits, in addition, functional tea supplement decreased blood lipid levels and Hcy, and increased SOD and GSH-Px levels. These results indicate that functional tea consumption may decrease the risk of cardiovascular disease via improving blood lipid levels and antioxidant status.